View Full Version : Acura Integra
- I'm Screwed. Drop Tranny.
- LS owners, ever encounter this problem?
- Racing next friday, need advice
- whats the best affordable spring/shock/coilover combo
- help me decide on which shocks to choose
- VAFC Question
- what octane do u run in your b18c1?
- Need alittle HELP
- i am a lucky guy compared to some....
- stretching JDM wire harness
- setting my b&m fpr
- Does anyone know of any auto junkyard w/ lots of integras
- HID gurus click here
- Integra DA Armrest???????
- coolant leak !
- Head assembly online?
- h22a integra dyno...
- Vtec Not kickin in
- HELP A ROOKIE. INTERMITTENT STALLING
- Has anyone ever had a problem with the Safety brake light staying on?
- Is the apexi gt spec exaust really worth it....who makes the best exaust for a 99 gsr?
- what kind of motor oil is the best to use with my 99 gsr?
- Cackling (B18C)
- CEL light on..
- fuel smell
- o2 harness help
- hatch won't open
- installing a used motor
- MOTOR TURNED OFF AFTER DOWN SHIFTING
- gsr on nuespeed race + stock shocks = O Skweek skweek skweek
- 92 LS & 94 LS fuel feed hose compatible?
- I know its been covered but I cant find in search (SAFC on a 99 LS)
- Running Rich
- 98+ Rear, Cut Out?
- HELP ! clutch and flywheel troubles
- Flywheel differences
- How do you post in classifieds?
- shyt was on, then it just turned off????
- Loose Shift Linkage :(
- Sway
- New Parts!! :)
- What is the best rear strut bar for a 90-93 teg?
- Swaping a H22a into a Integra GSR 1999? Help
- removing door moldings help...
- Kenji ECU questions...
- Integra that good?
- Integra 94-97 and 98+ Hoods, are they all the same?
- Should I buy this GSR?
- HX wheels on a teg....
- Radio Help
- where can i find a frame or chassis for a 88 crx??
- AC questions on 1989 Integra
- gsr turbo dyno sheet
- adjust timing and obd2 ecu question
- Intake question
- damn hit and runners
- head gasket
- ractive ajustable coilovers
- what exactly is a si-g?
- Broken relay???
- How much would could I sell an LS engine and tranny for?
- My Teggie Dilema
- Yo I found this on ebay and was confused
- what'z wrong with my clutch?
- clutches
- how to go about cleaning a halogen bulb
- turbo help!
- b12 like seafoam?
- what make of turbo?
- good shops in socal / exhaust question
- Integra interior vs RSX interior
- Rev Problem, Throttle body, Intake manifold??????
- JDM integra Front end
- Type R cams?
- VAFC question!!!
- megnetic drain plugs??
- Pull an axel, shouldn't transmission fluid come out??
- HELP! Car suddenly shuts off and on while driving
- Where is a good place to buy ES inserts/bushings? Search was made but.....
- ITR SWAY UPGRADE!
- good place to buy OEM parts for cheap?
- what to do next?
- generic raybesto frt rotors, bad?
- turn signals
- help vtec wire got tore out of thr harness
- gsr crank in b18a
- Need a motor?
- DC Sports header for a Canadian GSR
- ACT Presure plate
- will these springs work ????!!
- one touch window open doesn't work on my gsr
- dropped a bolt where you insert oil
- 497 whp GSR now on the road 2 years in the garage!
- Quick oil question
- engine difference between rs and ls?
- Integra Alternator on B16A2
- Major problem...HELP!!
- 301 JG cams (searched)
- block vin number location (already in EG/EK/Del Sol forum)
- will HX wheels fit on GSR?
- Engine swap places in SoCal...
- lsvtec info?
- max power for gsr cams
- Ricer?
- Buying Integra....need info
- can a muffler go bad?
- Vaf-c installation question...pls help
- anyone use the stock intake + filter?
- where to get gasket for header?
- Tranny question for a newbie..
- WTB: JDM S1 tranny
- da lips?
- blahhh crazy oil!!
- lsvtec or itr
- I Need Help Please
- 98 GSR alarm
- replacing spark plugs
- Replacing valve seals with head on
- ITR swap to G2 - Anyone have it?
- Nopi headers, BY DC Sports... anyone anyone????
- Help me out here
- edlebrock headers????????
- Ground strap?
- New to the boards
- I need new CV axles
- 98gsr block..cable b16 tranny in a 92 integra..what starter??
- Spoon N1 axle back vs. Comptech axle back
- Idle problems
- Your feedback appreciated, need to know about headers
- Passenger side axle stuck in tranny!
- GSR or Prelude
- obd1 ecus
- need an opinion
- Camber Kits
- tranny fluid capacity
- nar spec lca's and sway bar
- Found a good place for OEM filters
- installing springs, need help
- Brake pads & rotors [yes I searched!!] and I came up with this
- VAFC I --> II harness
- hydrolocked engine, need help with rebuild
- gasket set
- post pics of integra 94-01 fuse box (engine bay)
- TSX SideView Mirror
- Routing The Zex Nitrous
- correct me if i'm wrong...shifter bushings
- Invidia front lip (USDM) front
- 98+ Ebay headlights
- Vacuum tank needed with p28 ecu on a gsr?
- JDM b18b
- Is this a good deal? And insurance question.
- CEL
- First Time at the track
- Was looking on ebay and found this...
- What is the best Tranny Fliud to use and how much?
- Onseku coilovers????help
- USDM Gauge Cluster swapped for JDM one...question ????!!
- What models integs come stock vtec?
- Difference between integs
- Which Suspension???
- cat help
- oil in spark plugs
- knocking sound at idle
- Good Tires....
- Suspension Probem?
- How to make my car faster then a CIVIC Hatch with a B18C5 Please help
- curious if i should add mods to my car
- Whats my best bet? www.timeserts.com
- New stuff installed last weekend...
- B20 confusion(dont worry not B vs Z)
- suspension setup sounds good?
- Can anyone help me with a CARFAX?
- suspension?
- Which Coiilovers or sprigns to get for a daily driver gsr
- code 20: 2nd gen gsr. need answer
- Installing a Greddy Turbo Timer into an Integra
- Is anyone using the JG Edelbrock PRO FLOW 1 piece header?
- dc5/typer b-pipe fit a 90-93 teg
- no bend shifter
- b20 block?
- heater problem
- won't go into second gear sometimes and makes whinning noise
- Rattling at 2200 rpm. Help.
- Just installed my new EXHAUST!!! (pics inside)
- PIcs Of RS prop valve/brake lines
- New Exhaust installed, Woo HOO! (56K Warning)
- got a major problem!!!!!!need help!!
- motor problem - help!!!
- OBD1 Engine in an OBD2 car
- HELP me out, need a pic of engine bay fuse box OBD2a.
- a/c compressor clicks on and off every 10 seconds wtf?
- Is there an "H" emblem that's a direct replacement for the front "A" emblem?
- hesitation problem???
- mounting an safc/vafc 94 up teg
- b20 head swap
- emissions question
- Gauge cluster question??
- im new
- OBD2 P73 ECU compatible with OBD2 GSR concerning smog?
- car is sluggish under 4400 r's!!!
- My LS/VTEC video!!
- Burning oil in b18c1 gs-r 1 quart per 1000 miles (appx)
- header install problem
- new to the boards
- B16A or 99 LS in my 93 GS?
- drivetrain/suspension nightmares...
- AEM Cam Gears stripping.
- N/A, Turbo, Supercharger, Which one??
- megan racing exhaust review and bottleneck question
- Got my teg dynoed today
- Exhaust for a '91 Intergra???
- IAC problems....please help
- Question about 94-97 integra front bumper
- Tranny Help
- How High can i rev?
- Just installed my new AGV (eBay brand) cold air intake...check out the pics.
- vertical doors
- Most Embarrassing Moment with your teg
- Need Help with Hondata???
- Where can I get a front clip for cheap (bumper, hood, fenders, head lights)
- DC lower tie bar question?
- taking out heater core tube out. will anything leak from the tube?
- no brake fluid in system?
- oem bodykit?
- DA Speaker question...
- stolen...
- Will EG springs fit on my DA?
- look what BROWN did for me!
- Dilemma: From where to purchase New Tires?
- NSX calipers on teg
- What lip is this?
- GSR vs LS longblocks
- Need help ASAP..92 integra...starting issues
- Lake Washington Technical College theft...on my Prom day.
- Where does the fluid go?
- Can someone tell me what lip this is?
- Cylinder Head for B18
- Code 3 help
- Need opinion on custom spring rate...
- 87 integra suspension
- p/s belt snapped, ha, no p/s on ra-1's sux, will it hurt the rack?
- v-afc/mugen program q's
- who would be interested in a traction bar/crossmember bar for cheap?
- auto & manual tranny iacv same? g3 teg
- Help! D16A1 questions, need to know wut can be done to a D16A1 motor
- Clutch going bad or Clutch cable going bad or Throwout bearing?
- tire question
- Skunk2 IM arrived with no papers. Can anyone get a carb# for me!!
- 98 GSR USDM Front Bumper Diagram Assembly
- fuel filter location...