Post Links to Helpful FAQs So We Can Get an Archive Going

Reply Subscribe

Thread Tools

Search this Thread

10-08-2003, 12:52 PM

B18C5-EH2

Former Moderator

Thread Starter

Join Date: Oct 2001

Location: Southside ATL, GA

Posts: 16,612

Likes: 23

Received 54 Likes on 29 Posts

***Post Links to Helpful FAQs So We Can Get an Archive Going***

Reply Like

10-08-2003, 12:55 PM

silverEH2

Honda-Tech Member

Join Date: Feb 2002

Location: Dallas, TX

Posts: 4,453

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

i like this one, all your ecu pinouts

https://honda-tech.com/zerothread?id=478377

Reply Like

10-08-2003, 01:06 PM

BauleyCivic

Risky Business

Join Date: Jul 2002

Location: Trackside with the smoking bee

Posts: 25,211

Likes: 0

Received 47 Likes on 39 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

D15 SOHC VTEC Mini-Me How-To Writeup:

https://honda-tech.com/zerothread?id=554053

SOHC Transmission Disassembly and Input Shaft Bearing Replacement:

https://honda-tech.com/zerothread?id=596873

Tire Size and Gearing Information:

https://honda-tech.com/zerothread?id=629535

Reply Like

10-08-2003, 01:47 PM

Pho Real

Member

Join Date: Mar 2002

Posts: 5,579

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (BauleyCivic)

https://honda-tech.com/zerothread?id=605432

99-00 Climate control into 96-98

Reply Like

10-08-2003, 02:12 PM

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

H22A into Civic information:

MERGING OBD1 CIVIC HARNESS TO H22A ENGINE:
- Take off and mark every single harness connector on where it came from/where it goes from both H22A and stock civic engine. Make sure you label them of where pulled the plug from! This will save a TON of time!

Mount Civic harness on H22A and measure/modify wire to be lengthened/changed as follows:

- Change fuel injector connectors to H22A type and add resistor pack from H22A harness to Civic harness (see diagram on page 4)
- Extend Alternator wires to reach the H22A alternator (match the pinouts)
- Lengthen wire that goes to the starter solenoid on starter
- Attach reverse light sensor wire to the new H22A reverse light sensor wire

O2 sensor (CX only) add 3 wires to O2 sensor and follow o2 wires and change to Prelude O2 sensor connector. And wire the following:

- WHT/RED wire goes to D14 which is O2 Sensor Input
- ORG/BLK wire goes to A6, which is Heater Control
- GRN/WHT wire goes to D22 which is Sensor Ground
- YEL/BLK wire goes to A25 which is Sensor voltage

VTEC wiring: This applies to DX,LX,CX models only in 93-95!

- Wire from the VTEC Solenoid to the A4 pinout at the ECU. Add the pin to the shock tower harness, and female pin at the female shock tower connector.

Knock sensor wiring: (mounted at the rear of the engine near the cylinder head)

Air Intake Bypass solenoid (secondary butterflies)

- Sensor voltage to the A25 pinout (or splice into the Yel/Blk wire connector at the driver shock tower harness.
- ECU Signal leading to A17 pinout on ECU

EGR (Exhaust Gas Recirculation) System: Applies to all model civics except VX

- EGR lift valve solenoid – sensor voltage (A25 pinout) & ECU signal to A11
- EGR lift sensor – sensor voltage (A25 pinout), ground (D22 pinout) & ECU sensor signal to D12

MOUNT KITS AVAILABLE:

- HASport mount kit
- Place Racing Mounts
- HCP Mount kits

MAINTENANCE PRE-CAUTIONS

- Timing Belt for 92-96 USDM Prelude VTEC (2.2L) - $39.99 from AutoZone
- Water Pump for 92-96 USDM Prelude VTEC (2.2L) - $34.99 w/lifetime warranty from AutoZone
- Spark Plugs for USDM 92-96 Prelude VTEC (2.2L) – approx. $8
- Extended Fuel filter hose (from fuel filter to fuel rail) – You can use an extended fuel line and use hose connectors/clamps, or contact a local hose factory to have a custom hose made.
- Throttle Body gasket for Prelude VTEC (Honda dealership) $7

Drivetrain options:
- Right 90-93 Integra Axle
- Left Custom 92 Prelude Inner CV joint with 90-93 shaft & Outer CV joint from Raxles for $170 1-800-257-8192
OR
- 1990 Accord Intermediate Shaft
- Left and Right 90-93 Integra Axles
OR
- Driveshaftshop.com Stage/Level 1 axles Right & Left side using prelude intermediate shaft

Radiator options:
- FAL import racing fan for 92-00 Civic for $169.95 from Summit Racing 1-800-962-9094 with 1994-97 Del Sol VTEC Radiator or Integra Radiator
OR
- C&R Import Racing aluminum radiator with SPAL fan for DOHC motors - $439.95 (317) 293-4100

- 1992 Integra LS Upper Radiator Hose – approx. $15
- 1994 Del Sol VTEC lower radiator hose – approx. $15

If you are running NO A/C then you can get alternator belt - Part No. 25-060370 from NAPA Auto parts which is $20 or any 36-37” belt with 6 teeth.

I will post pictures here in a second...

Reply Like

10-08-2003, 02:20 PM

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

VX O2 sensor fix:

If you have a VX model Civic, and you do NOT use the VX engine harness, in order for your O2 sensor to properly work, you need to move the ORG/BLU wire from the 4th connector at the shock tower harness, and move it matching with the WHT wire on the 4 wire embedded engine harness.

Reply Like

10-08-2003, 02:25 PM

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

GSR Dash into EG wiring information:

Using the GSR harness (which I have done), it's very simple to get your dash 100% working.

You can use the GREEN and BLUE plug, which plug right into the Civic fuse box plugs.

HOWEVER

The grey plug has additional pinouts on the Integra dash harness and cannot be used. Just retain the Civic grey plug and match the pinouts.

I am currently making a JPEG diagram for this -- will be up soon.

ONE THING, your turn signals will not work.

Why?

This is why:

The power wire going to the Integra hazard switch is the Yel/Blk wire, where-as the Civic hazard switch is the YEL wire.

Just simply take the Yel/Blk wire from the Integra harness (which is an unused wire from the grey plug), and splice that into the Yel wire on the GREEN plug (the middle pinout YEL wire.

Kaboom -- done.

More info soon...

Modified by poison at 4:43 PM 10/8/2003

Reply Like

Trending Topics

**OFFICIAL FORCED INDUCTION RANDOM CHAT THREAD**

5.9k

284.2k
Ek civic mini Cooper brake upgrade questions

11

458
2013 CRV mystery noise after timing chain and tensioner replacement

5

161
AFI Headers Stud Size

10

371
Need ECU advise

2

101

10-08-2003, 02:34 PM

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

Here is some of VX's awesome detailed How-To's

Remove Sound deadening Tar from an EG:

https://honda-tech.com/zerothread?id=525936

Remove Carpet from an EH hatch:

https://honda-tech.com/zerothread?id=512955

Remove Rear/Back seat from an EH hatch:

https://honda-tech.com/zerothread?id=512901

Awesome work VX!

Reply Like

10-08-2003, 02:41 PM

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

Road racing on an H22 Civic by Newman:

https://honda-tech.com/zerothread?id=183552

H22A Civic Axle information by Newman:

https://honda-tech.com/zerothread?id=434668

EK wiring information by Katman:

https://honda-tech.com/zerothread?id=558245

Modified by poison at 4:54 PM 10/8/2003

Reply Like

10-08-2003, 03:11 PM

#10

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

Yet, more H22A information:

https://honda-tech.com/zerothread?id=362984

Reply Like

10-08-2003, 04:03 PM

#11

TrickHonda98

Join Date: Jun 2003

Location: If you make me mad, Ill Fling Poo at you

Posts: 732

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (splitime)

(I thought that this part of this thread was a small waste of space, i edited my old message and put thses in.

)

What the engine codes mean:
~ex.~ B18C5
B stands for b series motor
18 stands for 1.8 liter
C, C1, C5 stands for the classification and USDM JDM.
C=JDM C1=USDM C5=TypeR

engine codes

EW4 1.4L & 1.5L SOHC PGM-Fi '84-'87 Civic 60-92hp
D15B 1.5L SOHC non-VTEC '88-'95 Civic's 62-102hp
D16A1 1.6 L DOHC 86-89 Integra 86/87 113hp 88/89 118hp
D16A6 1.6L SOHC 88-91 Civic Si/ CRX Si 108hp
ZC JDM equivalent of D16A1 130ps
D16Z6 1.6L SOHC VTEC 92-95 Civic EX/Si 125hp
D16Y5 1.6L SOHC VTEC-E 96-00 Civic HX 115hp
D16Y7 1.6L SOHC non-VTEC 96+ Civic CX/DX/LX 106hp
D16Y8 1.6L SOHC VTEC 96+ Civic EX 127hp
B16A 1.6L JDM DOHC VTEC 89-91 Civic Si-R I/CRX Si-R, Integra RSi/XSi 160ps
B16A2/3 1.6L USDM DOHC VTEC 93-97 DelSol VTEC/99-00 Civic Si 160hp
B16A 1.6L JDM DOHC VTEC 92-95 Civic Si-R II/ 92-97 CRX DelSol SiR 170ps
B16B 1.6L JDM DOHC VTEC 98+ Civic Type R 185ps
D17A2 1.7L SOHC VTEC-E 01 Civic EX 127hp
D17A1 1.7L SOHC non-VTEC '01+ Civic DX/LX 115hp
B17A1 1.7L USDM DOHC VTEC 92-93 Integra GS-R 160hp
B18A1 1.8L USDM DOHC non-VTEC 90-93 Integra RS/LS/GS 90-91: 130hp / 92-93: 140hp
B18B1 1.8L USDM DOHC non-VTEC 94-01 Integra RS/LS/GS 140hp
B18C 1.8L JDM DOHC VTEC 94+ Integra SiR-G 180ps
B18C1 1.8L USDM DOHC VTEC 94+ Integra GS-R 170hp
B18C5 1.8L USDM DOHC VTEC 97+ Integra Type R 195hp
B18C6/7 1.8L JDM DOHC VTEC 96+ Integra Type R 200ps
B20A5 2.0L DOHC non-VTEC 87-91 Prelude 2.0Si 135hp
B20B 2.0L DOHC non-VTEC 96-98 CR-V 126hp
B20Z 2.0L DOHC non-VTEC 99-01 CR-V 143hp
B21A1 2.1L DOHC non-VTEC 90-91 Prelude Si 145hp
K20A3 2.0L DOHC i-VTEC '02+ RSX
'02+ Civic Si 160hp
K20A2 2.0L DOHC i-VTEC 02+ RSX Type S
02+ Civic TypeR 200hp
K20A 2.0L JDM DOHC i-VTEC '02+ Integra Type R 220ps
F20A1 2.0L JDM DOHC non-VTEC 90-93 Accord Si 155hp
F20B 2.0L JDM DOHC VTEC 90-93 Accord Si-R 190ps
F20C1 2.0L DOHC VTEC '00+ S2000 250ps/240hp
F22A1 2.2L USDM non-VTEC 92-96 Prelude S 90-93 Accord LX/EX
130hp-135hp
F22B 2.2L USDM SOHC VTEC 94-97 Accord EX/97 2.2CL 145hp
F23A5 2.3L USDM SOHC 98+ Accord DX 135hp
F23A1 2.3L USDM SOHC VTEC 98+ Accord EX & LX/98-99 2.3CL
150hp
F23A4 2.3L USDM SOHC ULEV VTEC 98+ Accord EX & LX 148hp
H22A1 2.2L USDM DOHC VTEC 92-96 Prelude VTEC 190hp
H22A4 2.2L DOHC VTEC 97-01 Prelude VTEC/SH 97-98: 195hp 99-01: 200hp
H22A 2.2L JDM DOHC VTEC 92+ Prelude Type-S, 97+ Prelude SiRS Spec 220ps
H23A1 2.3L USDM DOHC non-VTEC Prelude Si 160hp
G25A1 2.5L USDM SOHC non-VTEC 96-98 2.5TL 176hp
J25A 2.5L JDM SOHC VTEC V6 JDM Honda Aspire/Sabre 200ps
C27?? 2.7L USDM SOHC non-VTEC V6 86-89 Legend 150-160hp
C27?? 2.7L USDM SOHC non-VTEC V6 95-97 Accord V6 170HP
C30A(?) 3.0L DOHC VTEC V6 91-96 NSX/NSX-T 270hp
J30A1 3.0L USDM SOHC VTEC V6 98-02 Accord V6/97-99 3.2CL 200hp
C32A6 3.2L USDM SOHC non-VTEC V6 91-95 Legend Sdn, 91-92 Legend Cpe 96-98 3.2TL 200hp
C32A5 3.2L USDM SOHC non-VTEC V6 94-95 Legend GS Sdn, 93-95 Legend Cpe 230hp
C32A? 3.2L DOHC VTEC- V6 97+ NSX/NSX-T 290hp
J32A1 3.2L USDM SOHC VTEC V6 98+ 3.2TL/3.2CL 225hp
J32A2 3.2L USDM SOHC VTEC V6 00+ 3.2CL Type-S, 01 3.2TL Type-S 260hp
C35A2 3.5L USDM SOHC non-VTEC V6 3.5RL 215-225hp
J35A1 3.5L USDM SOHC VTEC V6 98+ Odyessy 210hp
J35A3 3.5L USDM SOHC VTEC V6 Acura MDX 240hp

ECU CODES

PG6 : 88-89 Integra (all makes)
PM5 : 88-91 Civic/CRX DX
PM6 : 88-91 Civic/CRX SOHC Si
PM7 : 89-91 DOHC ZC (JDM 'EF' ECU)
PM8 : 88-91 CRX HF
PR2 : 89-91 ZC (Euro)
PR3 : 89-91 JDM B16A EF8/9
PR3 -J00 or J51 : 92 JDM Integra B16A EF8/9
PW0 : 89-91 JDM B16A EF8/9 DA6-XSi
PR4 : 90-91 Integra LS/GS
PS9 : 88-91 4 door Civic EX Auto
P05 : 92-95 OBD-1 Civic CX
P06 : 92-95 OBD-1 Civic DX
P07 : 92-95 OBD-1 Civic VX
P08 : 92-95 OBD-1 Civic D15 JDM
P0A : 94-95 OBD-1 Accord EX
P13 : 93-95 OBD-1 Prelude Vtec
P14 : 93-95 OBD-1 Prelude Si (non Vtec)
P27 : 92-95 OBD-1 EG JDM Civic 1600 sohc
P28 : 92-95 OBD-1 Civic Si/Ex
P30 : 92-95 OBD-1 DelSol DOHC Vtec Si/EG SiR
P54-G31 : 1997 Honda Accord 1.8 LS
P61 : 92-93 OBD-1 Integra GSR
P72 : 94-95 OBD-1 Integra GSR
P72 : 96-00 OBD-2 Integra GSR
P73 : 96-00 OBD-2 Integra Type-R (JDM & USDM)
P74/75: 92-95 OBD-1 Integra LS/GS
P75 : 96-00 OBD-2 Integra LS/GS
P2N : 96+ OBD-2 Civic HX Coupe
P2P : 96+ OBD-2 Civic EX Coupe
P2E : 96+ OBD-2 Civic DX Coupe
P2M : 96+ OBD-2 NZ Civic SOHC VTEC
P2T : 99+ OBD-? Civic Si Coupe
P5P : 97-00 OBD-2 Prelude Type-S (JDM ECU)
PBA : 97+ US Acura 1.6EL
PCT : 98+ JDM ITR / CTR
PCX : 99+ OBD-? S2000

Modified by TrickHonda77 at 8:32 PM 6/18/2004

Modified by TrickHonda98 at 4:55 PM 6/28/2004

Reply Like

10-08-2003, 05:04 PM

#12

Honda-Tech Member

Join Date: Feb 2002

Location: Bay Area, CA

Posts: 1,641

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (TrickHonda77)

1995.5 - 1997 JDM ITR 4-Lug (4x114.3mm) Brake Tech Thread!

How-To: Change Out Main Rear Trailing Arm Bushings!

How-To: Cut Away Old Control Arm Bushings & Press In New Ones!

Detailed How To: Remove Rear Quarter Trim Panels From An EH Hatch!

Detailed How To: Remove Headliner & Pillar Trim Panels From An EH Hatch!

I'll edit this post in the future when i can dig up more tech threads.

Modified by VX at 8:05 PM 11/30/2003

Reply Like

10-08-2003, 05:57 PM

#13

shorti

Join Date: Oct 2002

Location: St. Albert, AB, Canada

Posts: 676

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (VX)

i know this is the eg+ forum but i have a bunch of links for 4th gens too

4th gen SiR cluster install
http://www.geocities.com/Motor....html

4th gen ECU Codes and trouble shooting
https://honda-tech.com/zerothread?id=468260

EF Canards
https://honda-tech.com/zerothread?id=432972

How-To: Extended Shock Travel
https://honda-tech.com/zerothread?id=469485

SOHC upgrades *REVISED* It's long and is a work in progress.
https://honda-tech.com/zerothread?id=335078

Reply Like

10-08-2003, 06:32 PM

#14

Smith Wise

Member

Join Date: Sep 2002

Location: Eastside ATL, GA

Posts: 2,590

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (shorti)

Y8 Manifold on Y7

Y8 Manifold swap on Y7

EK Rear Disc Conversion

EK Rear Disc Conversion

EG Dash Removal

EG Dash Removal

Remove Paint from Interior

Yes I was stupid enough to paint it!!

Manual Door Locks

Manual Door Locks

EK Auto to Manual Swap

Auto to Manual

That's it for now.

edit: How could I forget.........

EK Dash Removal

EK Dash Removal

EM1 Cluster in Auto EK

Just a warning about the "extra plugs"

Reply Like

10-08-2003, 06:41 PM

#15

Fred n J_v2.0

Member

Join Date: Jan 2003

Location: its a new day....

Posts: 2,051

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (Jswpstdoff)

tom's post in here is very insightful... about the fifth/sixth one down

swapping in a b-series:
https://honda-tech.com/zerothread?id=550976

Reply Like

10-08-2003, 09:30 PM

#16

smnowell

Honda-Tech Member

Join Date: Sep 2002

Location: Baltimore, MD

Posts: 3,070

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (BauleyCivic)

How-To: DOHC VTEC Valve, Valve Spring, and Ti Retainer Replacement
https://honda-tech.com/zerothread?id=474849

How-To: Paint Your Car - Tips, Tools, and Techniques
https://honda-tech.com/zerothread?id=376870

Reply Like

10-08-2003, 10:01 PM

#17

degooser

Member

Join Date: Oct 2002

Location: CHEESE BALL, USA

Posts: 2,236

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (b16a ferio)

California people who never thought that a JDM motor will pass at the State Ref...!

Modified by degooser at 9:01 AM 4/2/2004

Reply Like

10-09-2003, 04:31 AM

#18

ki3t

This user can set his title.

Join Date: Mar 2003

Location: Jizzleland

Posts: 8,133

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

5 lug conversion

https://honda-tech.com/zerothread?id=333061

Reply Like

10-09-2003, 05:37 AM

#19

2000blackgsr

Honda-Tech Member

Join Date: Nov 2002

Location: Augusta, GA

Posts: 1,612

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18cR-Ej1)

How to put X Brakes on Y Car

https://honda-tech.com/zerothread?id=152884

Reply Like

10-09-2003, 06:10 AM

#20

B18C5-EH2

Former Moderator

Thread Starter

Join Date: Oct 2001

Location: Southside ATL, GA

Posts: 16,612

Likes: 23

Received 54 Likes on 29 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (B18C5-EH2)

Here's a nice DIY for painting your exterior trims to make them look like brand new O-E pieces:

https://honda-tech.com/zerothread?id=489625

Reply Like

10-09-2003, 07:07 AM

#21

Nerv2g

Join Date: Jan 2002

Location: Here with Hans and Frans

Posts: 529

Likes: 0

Received 0 Likes on 0 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

This post shows pics of what poison is talking about. (The ITR swap into a 92-95 VX).

https://honda-tech.com/zerothread?id=635782

Reply Like

10-09-2003, 08:58 AM

#22

BauleyCivic

Risky Business

Join Date: Jul 2002

Location: Trackside with the smoking bee

Posts: 25,211

Likes: 0

Received 47 Likes on 39 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (Nerv2g)

How to Paint Wheels:

https://honda-tech.com/zerothread?id=316500

Reply Like

10-09-2003, 10:15 AM

#23

poison

Senior Member

Join Date: May 2001

Location: Where snow is, I am.

Posts: 10,753

Likes: 0

Received 1 Like on 1 Post

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (DvSiR)

Places people got their swap:

https://honda-tech.com/zerothread?id=50010

How to swap a motor:

https://honda-tech.com/zerothread?id=131949

Reply Like

10-09-2003, 05:55 PM

#24

Turbogixxer

Honda-Tech Member

Join Date: Aug 2002

Location: Boca Raton, FL

Posts: 11,001

Likes: 0

Received 2 Likes on 2 Posts

Re: ***Post Links to Helpful FAQs So We Can Get an Archive Going*** (poison)

Quote:

Originally Posted by poison

I will post pictures here in a second...

There is mine:

Start paste

OK, I am trying to cover ALL you need to do this swap and all the myths and **** that people have been saying about this swap.

First, Try to find a car that has not been in a front end crash. The new motor mounts are made for a straight frame, so if you have frame damage, the mounts will not line up right.

Motor Mounts: Now, your stock or B-series mounts will not work. You have two choices: 1) Hasport or 2) HCP. The difference in the mounts are little. Hasports cost the is higher than the HCP. The HASport motor mounts were designed for better axles angles, so you have less broken axles. Now, HCP designed there kit more towards the stock prelude mounting position. I mostly use HCP because of the price and seen no real benefits for the HASport besides (in the HCP) if you do not grind enough off the transmission mount, it will grind 5th and reverse. Now, I know you are saying "what about other mounts that I have seen like Place racing, totem, etc?". With place racing, I have seen nothing but problems with axles binding and just poor R&D. With totem, The link will show you all: http://www.jdmshit.com/Totem/ . Totem copied the HCP design and did a shitty job at it. With ALL mounts you will have to use a 92-96 H-series prelude rear transmission bracket.

Axles: You have many choices here. You can use a 90-93 accord intermediate shaft with 90-93 integra axles, or use the prelude intermediate shaft with a 90-93 integra passenger side axle and a hybrid axle with a 'lude inner CV joint and the 90-93 integra shaft and outer CV joint for driver's side axle. The only difference in those axles set-up is the intermediate shaft you use. I have seen them hold to nice horsepower, so you do not have to go the more money route. Another way to go is, Use the prelude intermediate shaft and order up a pair of DSS axles for the swap.

Wiring: I know that people think that this is the hardest part of the swap, but it is not (thanks to that damn shift linkage pin

). Now, the easiest harness to use is your stock harness. Most of the plugs will match up. If the is the same OBD, the colors of the wires will match up too. Now, there we go:
1. You will have to change the injector clips to the h22a style, that is very easy, just cut and splice. Now, your stock injectors are saturated. The H22a injectors are Peak and hold. you will have to wire in a resistor box. It is easy. there is a diagram:

http://www.hondata.com/techinjectorwiring.html

2. You will have to extend the Alternator wiring. Now, if it is the SAME OBD then you should have no problem. All the colors are the same.

3. You will have to length the wire going to the starter solenoid.

4. You will have to use the H22a reverse light plug. No biggy, just cut and splice.

5. Depending on what model and year you have, it will determine how much wiring you will have to do. there is a diagram to help you:

also you may have to rewire the 02 sensor (on VX and CX only) there are the pinouts:
WHT wire goes to D14 (O2 Sensor Input) - needs to be a shielded wire with ground (it has to be shielded wire, or it will not work right)
BLK wire goes to A6 which is Heater Control
GRN wire goes to D22 which is Sensor Ground
BLK wire goes to B1 or A25 which is Sensor voltage

6. As for the EGR, JDM motors you do not have to wire it up, BUT USDM you do. The JDM motors will get a code for it off and on, but just reset the computer, and it will go away.

7. Sensor ID. There is a pic that will make the job easier:

#1 is ECT (engine coolant temperature switch)

#2 is the coolant sending unit (this is what sends your cluster how hot your water is)

#3 is the knock sensor.

#4 is the oil sensor.

NOW, label all the sensors when you take them off. It will make it easier when you put the new motor in.

THINGS TO REPLACE.

When you have the motor/transmission out, you should replace: the clutch, timing belt and balance shaft belt, water pump, spark plugs. Those are just the basics, you can replace more.

COOLING SYSTEM

You will need a 92 integra LS upper Radiator hose and a 1994 Del Sol VTEC lower radiator hose. You can get them almost anywhere. You will have to get a slim fan OR mod. your stock fan to work. I think that the slim fan is the best. They are like $30 at pep boys. Now, as far as the Radiator questions, you can run your stock single core Radiator with no problems, but I would upgrade to a Del Sol VTEC dual core Radiator.

CUTTING AND HACK TO THE CHASSIS

you will need to cut a 2x3 hole for the shift cables. Here is a pic:

you will also have to cut the transmission mount. With the HASport, you will have to cut it off totally. With the HCP, you will only have to cut about 1" x 1" off it.

I think that is it, if you have any questions, just ask!

Special thanks to Brandon (poison) and Dave Newman (Newman)

end paste

I will hopely have a new, better (a lot more pics) one in a week to two weeks.