how to install window visors on an EK
09-28-2003, 12:13 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: NorCal, USA
Posts: 4,462
Likes: 0
Received 0 Likes
on
0 Posts
how to install window visors on an EK
ok so since i did not see a how to on this part for our cars. i though i'd do a write up. i ordered these from JDMSpecPerf. Leo took care of me 
thanks 
. well, when i received them i couldnt find the instructions so i had to guess with all the different brackets. well here you go......
i love my parts
first you have to pull the outter weather stripping back, remember to roll your windows down. pull hard, you wont break anything.
now pop all the brackets into place except the B-brackets. D, F, H brackets can be popped on with the plastic clips on the visor while off the car.
the B-brackets use the little screws that are supplied. this part you have to pull the inner weather stripping back. where the B-brackets go, the metal part of the window frame has holes to bolt the bracket onto the frame. in the picture below shows which bracket goes to where.
now its time to install the visor on the door. at the very ends of the visor, there are already brackets mounted. the one near the mirror slides right in behind the triangle piece of the mirror. the other end near the door jam slides in right under the hard plastic. now push the rest of the brackets into the window frame groove.
put the weather stripping back into place.
now there are washers supplied, the go between the visor and the B-brackets. then that is when you can pop on the plastic clips.
wha La
should of taken more pics. hope the text helps... enjoy
thanks . well, when i received them i couldnt find the instructions so i had to guess with all the different brackets. well here you go......i love my parts
first you have to pull the outter weather stripping back, remember to roll your windows down. pull hard, you wont break anything.
now pop all the brackets into place except the B-brackets. D, F, H brackets can be popped on with the plastic clips on the visor while off the car.
the B-brackets use the little screws that are supplied. this part you have to pull the inner weather stripping back. where the B-brackets go, the metal part of the window frame has holes to bolt the bracket onto the frame. in the picture below shows which bracket goes to where.
now its time to install the visor on the door. at the very ends of the visor, there are already brackets mounted. the one near the mirror slides right in behind the triangle piece of the mirror. the other end near the door jam slides in right under the hard plastic. now push the rest of the brackets into the window frame groove.
put the weather stripping back into place.
now there are washers supplied, the go between the visor and the B-brackets. then that is when you can pop on the plastic clips.
wha La
should of taken more pics. hope the text helps... enjoy
09-28-2003, 01:08 AM
#4
Honda-Tech Member
Re: how to install window visors on an EK (jdmEL)
Nice, i went USDM lol and bought me some weather techs. Those install so much more secure than my weathertech's. Car looks good.
Car looks good.
Trending Topics
09-28-2003, 09:40 AM
#13
Join Date: Jun 2002
Location: Eustis, Florida, USA
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Re: (BenMara)
sweet.. i got mine for 30 dollars from discount.. not sure on how long that tape is going to keep them stuck there.. but they work great.. btw nice work! love your car..
03-26-2004, 10:07 PM
#19
Guest
Posts: n/a
Re: (Kid1320)
1:49 PM 9/28/2003
11:01 PM 3/26/2004
Bumped to say:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kid1320 »</TD></TR><TR><TD CLASS="quote">OLD SKOOL
</TD></TR></TABLE>
wonderful
11:01 PM 3/26/2004
Bumped to say:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kid1320 »</TD></TR><TR><TD CLASS="quote">OLD SKOOL
</TD></TR></TABLE>wonderful
03-27-2004, 12:56 AM
#23
Join Date: Nov 2003
Location: NorCal
Posts: 1,769
Likes: 0
Received 0 Likes
on
0 Posts
Re: (diearzte2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by diearzte2 »</TD></TR><TR><TD CLASS="quote">1:49 PM 9/28/2003
11:01 PM 3/26/2004
Bumped to say: OLDSCHOOL
wonderful</TD></TR></TABLE>
Funny ****
11:01 PM 3/26/2004
Bumped to say: OLDSCHOOL
wonderful</TD></TR></TABLE>
Funny ****
