Forgot your Password?
Meets & Greets!
Meets & Events
Honda and Acura Model-Specific Technical Forums
Honda Accord (2013 - Current)
Honda Accord & Crosstour (2003 - 2012)
Honda Accord (1990 - 2002)
Honda Civic (2016 - Current)
Honda Civic (2006 - 2015)
Honda Civic (2001 - 2005)
Honda Civic / Del Sol (1992 - 2000)
Honda CRX / EF Civic (1988 - 1991)
Honda Element & CR-V
Honda Insight & CR-Z
Odyssey | Ridgeline | MDX | Pilot | RDX | HR-V
Acura Integra Type-R
Acura RSX DC5 & Honda Civic EP3
Acura TL, RL & ZDX
Honda Ruckus and Scooters
Honda and Acura Technical Forums
Road Racing / Autocross & Time Attack
Tech / Misc
Suspension & Brakes
Engine Machining & Assembly
Welding / Fabrication
All Motor / Naturally Aspirated
Hybrid / Engine Swaps
Audio / Security / Video
Wheel and Tire
Paint and Body
Engine Management and Tuning
Transmission & Drivetrain
Want to Buy
Classifieds: Forced Induction
Vehicles for sale
Northern California (Sales)
Southern California (Sales)
Texas -OK -LA (Sales)
Miscellaneous - Appearance - Lighting
Wheels, Tires, Brakes, and Suspension
Honda and Acura Appearance / Cosmetic Forums
Honda / Acura
Other Make Vehicles
Appearance Build Threads
General Discussion and Debate
Regional Forums and Meets
Hawaii & Asia-Pacific
UK and Europe Regional
Tire Rim Calculator
Become a Vendor
Share Your Pictures with Our Community.
At least the front came out pretty good
Intercooler bolted in and now working on pieces to funnel the air into the veins.
The tube going from one shock hoop to the others is removable with 4 bolts. More support for the shocks.
Shot from the driver side.
Rear suspension almost done. Still have to make the driver pushrod.
a word from our sponsor
Setting the intercooler in to check measurements. Had to cut a different cross bar in the end.
Picture from the back.
The hoops are the same size. The lighting and the wood hoist system makes it look wrong.
Checking the measurement from rear firewall to cylinder head.
INTERCOOLER need I say more.
On the turbo, maybe a .13"ish opening.
Feed line, can barely see but there's a small orifice down in there.
Making the matching tubes for the left side and a tube for extra support.
Here's a good shot from the front.
Right rear shock hoop mostly done and you can see the passenger rollover hoop.
Making the right rear shock mounting hoop. The pushrod was also mocked up.
Rear passenger shock pivot mount tacked in.
A steering rack that turns left when I turn left. I still have room for the electric fan to mount to the radiator. The steering rack is new and original for a 71-73 Mustang.
Radiator installed and you can get a better idea of what the front suspension looks like.
Here's the center mount all welded up. May have to add some pieces to keep any water staying in that area.
Both pushrods in but no center mount done yet.
First pushrod linkage design. I made a change to it farther down.
Front passenger shock linkage pivot point tacked in.
Driver side main tube matches the passenger side. No clue why I took the picture parallel with tube and not the ground.
a word from our sponsor
Go to page