FAQ - READ BEFORE ASKING A QUESTION
#52
Re: FAQ (Kid1320)
Paint codes, etc.
https://honda-tech.com/zerothread?id=789766
Brake Tech:
https://honda-tech.com/zerothread?id=790294
https://honda-tech.com/zerothread?id=789766
Brake Tech:
https://honda-tech.com/zerothread?id=790294
#53
Honda-Tech Member
Join Date: Nov 2000
Location: Charlotte
Posts: 11,967
Likes: 0
Received 0 Likes
on
0 Posts
Re: FAQ (F.A.Q.) - Frequently Asked Questions (vtec.dc2)
ITR air bag tray
https://honda-tech.com/zerothread?id=358313
ITR Various brake pictures
https://honda-tech.com/zerothread?id=258996 (lots)
ITR Autozone rotor info
https://honda-tech.com/zerothread?id=181691
23mm rear sway bar review
https://honda-tech.com/zerothread?id=100159
Front wheel bearing/extended stud install
https://honda-tech.com/zerothread?id=720159
Loose dipstick tube posts
https://honda-tech.com/zerothread?id=203783
https://honda-tech.com/zerothread?id=232850
Modified by Willard at 5:29 PM 3/16/2004
https://honda-tech.com/zerothread?id=358313
ITR Various brake pictures
https://honda-tech.com/zerothread?id=258996 (lots)
ITR Autozone rotor info
https://honda-tech.com/zerothread?id=181691
23mm rear sway bar review
https://honda-tech.com/zerothread?id=100159
Front wheel bearing/extended stud install
https://honda-tech.com/zerothread?id=720159
Loose dipstick tube posts
https://honda-tech.com/zerothread?id=203783
https://honda-tech.com/zerothread?id=232850
Modified by Willard at 5:29 PM 3/16/2004
#57
Honda-Tech Member
Join Date: Aug 2002
Location: Frederick
Posts: 4,132
Likes: 0
Received 0 Likes
on
0 Posts
Re: FAQ (PriMaTe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PriMaTe »</TD></TR><TR><TD CLASS="quote">Sticky? </TD></TR></TABLE>
Excellent idea.
Excellent idea.
#58
Re: FAQ (Jackson4Door)
Good job! I noticed however that there is nothing on suspention. This might help.
https://honda-tech.com/zerothread?id=158822
https://honda-tech.com/zerothread?id=158822
#59
Re: FAQ (IGGY)
I don't think OEM Acura parts source is listed yet.
http://www.acuraautomotiveparts.org/
Part numbers and diagrams ...
http://www.acuraautomotiveparts.org/
Part numbers and diagrams ...
#62
Senior Member
Here's a link to a discussion that contains all of the engine code information for all of the B18C blocks, from B18C1 to B18C7 and every number in between.
https://honda-tech.com/zerothread?id=828834
https://honda-tech.com/zerothread?id=828834
#63
Honda-Tech Member
Join Date: Oct 2003
Location: Homie dont, play that, USA
Posts: 11,340
Likes: 0
Received 1 Like
on
1 Post
Re: (Kendall)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kendall »</TD></TR><TR><TD CLASS="quote">Here's a link to a discussion that contains all of the engine code information for all of the B18C blocks, from B18C1 to B18C7 and every number in between.
https://honda-tech.com/zerothread?id=828834</TD></TR></TABLE>
Great website....a lot of useful information .
https://honda-tech.com/zerothread?id=828834</TD></TR></TABLE>
Great website....a lot of useful information .
#66
#67
Join Date: Aug 2003
Location: Warning, gRand Return imminent,, NY, USA
Posts: 10,173
Likes: 0
Received 0 Likes
on
0 Posts
Info posted by Mike M in regards to parts often forgotten and overlooked when installing a JDM front
https://honda-tech.com/zerothread?id=864956
https://honda-tech.com/zerothread?id=864956
#68
Re: (opie)
I figured I'd ask in here first.
One of my ITR decals is off (I know it is, one is farther forward than the other )
does anyone know how many inches or CMs from the wheel-well and side skirt the decals should be placed on both sides?
One of my ITR decals is off (I know it is, one is farther forward than the other )
does anyone know how many inches or CMs from the wheel-well and side skirt the decals should be placed on both sides?
#70
FAQ (F.A.Q.) - Frequently Asked Questions (vtec.dc2)
IF I may add these to the list for Port and polishing I think it might help...
https://honda-tech.com/zerothread?id=175564
https://honda-tech.com/zerothread?id=126166
https://honda-tech.com/zerothread?id=116005
https://honda-tech.com/zerothread?id=101042
https://honda-tech.com/zerothread?id=89948
https://honda-tech.com/zerothread?id=77218
https://honda-tech.com/zerothread?id=484398
https://honda-tech.com/zerothread?id=172010
https://honda-tech.com/zerothread?id=767606
https://honda-tech.com/zerothread?id=175564
https://honda-tech.com/zerothread?id=126166
https://honda-tech.com/zerothread?id=116005
https://honda-tech.com/zerothread?id=101042
https://honda-tech.com/zerothread?id=89948
https://honda-tech.com/zerothread?id=77218
https://honda-tech.com/zerothread?id=484398
https://honda-tech.com/zerothread?id=172010
https://honda-tech.com/zerothread?id=767606
#72
Honda-Tech Member
.....thought I'd take a look in here (been a while), and I didn't see anything on intakes/ filters.
I know those were big topics a while back what with aem vs mugen vs spoon filter vs comptech filter vs comptech icebox vs j's racing, etc.....
I know a lot of people were looking for k&n part numbers to fit the stock itr intake elbow.....
{edit} FOUND A LINK: {/edit}
https://honda-tech.com/zerothread?id=890461
Modified by Black R at 2:31 AM 6/12/2004
I know those were big topics a while back what with aem vs mugen vs spoon filter vs comptech filter vs comptech icebox vs j's racing, etc.....
I know a lot of people were looking for k&n part numbers to fit the stock itr intake elbow.....
{edit} FOUND A LINK: {/edit}
https://honda-tech.com/zerothread?id=890461
Modified by Black R at 2:31 AM 6/12/2004
#75
Honda-Tech Member
Join Date: Oct 2003
Location: Homie dont, play that, USA
Posts: 11,340
Likes: 0
Received 1 Like
on
1 Post
Re: FAQ (F.A.Q.) - Frequently Asked Questions (vtec.dc2)
AIR INTAKE INQUIERIES
note please this in on a bone stock ITR motor!
https://honda-tech.com/zerothread?id=901835
https://honda-tech.com/zero...11319
Cliff Notes from the above thread are as follows.
1st......Mugen air-box
2nd.....A close tie between J's and Comptech icebox
3rd.....Stock Airbox
4th.....AEM = noise maker
https://honda-tech.com/zerothread?id=948820 ........this test was posted on 8/4/04 . A total of six different intakes were used on a moded ITR motor!
New as of 9/14/04.....we have J's vs Mugen airbox review by Chris93Si https://honda-tech.com/zero...95465
Another "what intake are you using" post https://honda-tech.com/zerothread?id=1130615
Modified by Jon D at 4:00 PM 2/3/2005
note please this in on a bone stock ITR motor!
https://honda-tech.com/zerothread?id=901835
https://honda-tech.com/zero...11319
Cliff Notes from the above thread are as follows.
1st......Mugen air-box
2nd.....A close tie between J's and Comptech icebox
3rd.....Stock Airbox
4th.....AEM = noise maker
https://honda-tech.com/zerothread?id=948820 ........this test was posted on 8/4/04 . A total of six different intakes were used on a moded ITR motor!
New as of 9/14/04.....we have J's vs Mugen airbox review by Chris93Si https://honda-tech.com/zero...95465
Another "what intake are you using" post https://honda-tech.com/zerothread?id=1130615
Modified by Jon D at 4:00 PM 2/3/2005