The Official EF Discussion Thread
Honda-Tech Member
Joined: Dec 2004
Posts: 4,562
Likes: 0
From: Madison, WI, USA
Re: (Boosted Chemist)
Lost is Black asked me to post my seat mounts. I used the factory rail and bolted the 1/4"x2" aluminum bars between the 2, with grade 8 bolts. This is basically a temporary solution until I can get a memory fab rail. The seat is a bit high for me, even with the seat all the way down.
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">i thought about painting mine at least the rear...cause....god does it stick out</TD></TR></TABLE>
I got an oldschool grey one
I got an oldschool grey one
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (Boosted Chemist)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
From top ot bottom? i have mine out of the car, idk if i can help you on that one</TD></TR></TABLE>
We're having issues figuring out how to mount the fuel cell. It's a 5 gal cell, and we're recessing it in the floor far enough to drop the sump below the car. We have about 3-4" on either side (front/back). Initially, he was going to mount some tabs on the sub frame to mount it, but I informed him I HAVE to have space to run the sway bar. MMs matter with this. I was going to just order the sway bar to eliminate any questions, but it's on back order.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
I got an oldschool grey one </TD></TR></TABLE>
Mine is getting powder coated, for sure.
From top ot bottom? i have mine out of the car, idk if i can help you on that one</TD></TR></TABLE>
We're having issues figuring out how to mount the fuel cell. It's a 5 gal cell, and we're recessing it in the floor far enough to drop the sump below the car. We have about 3-4" on either side (front/back). Initially, he was going to mount some tabs on the sub frame to mount it, but I informed him I HAVE to have space to run the sway bar. MMs matter with this. I was going to just order the sway bar to eliminate any questions, but it's on back order.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
I got an oldschool grey one
</TD></TR></TABLE>Mine is getting powder coated, for sure.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
Lame and pointless.
</TD></TR></TABLE>
says the guy with a mint sir-1 vaccum diagram on the EFNIzInE hood with the JdM FriZoNt & RizeAr , K20 Powa and a kids playground for a roll cage
Lame and pointless.
</TD></TR></TABLE>
says the guy with a mint sir-1 vaccum diagram on the EFNIzInE hood with the JdM FriZoNt & RizeAr , K20 Powa and a kids playground for a roll cage
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
you could also do this if you have the 88 rails.
im pretty sure you could fabricate L brackets (similar to vision and bride rails) and get them to work with your stock rails. that way you can sit lower in your car easily.
</TD></TR></TABLE>you could also do this if you have the 88 rails.
im pretty sure you could fabricate L brackets (similar to vision and bride rails) and get them to work with your stock rails. that way you can sit lower in your car easily.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">
says the guy with a mint sir-1 vaccum diagram on the EFNIzInE hood with the JdM FriZoNt & RizeAr , K20 Powa and a kids playground for a roll cage </TD></TR></TABLE>
Haha, I can use the hood clearance excuse for getting the EF9 front.
says the guy with a mint sir-1 vaccum diagram on the EFNIzInE hood with the JdM FriZoNt & RizeAr , K20 Powa and a kids playground for a roll cage
</TD></TR></TABLE>Haha, I can use the hood clearance excuse for getting the EF9 front.
Honda-Tech Member
Joined: Nov 2002
Posts: 6,725
Likes: 0
From: GA
Re: (-NA-aLL-thE-wAy-)
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (JKGONZALEZ3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 »</TD></TR><TR><TD CLASS="quote">why aren't the 88-89 ecu's chip-able or hard to chip? i have a 89 pm9 and it has the eprom there just no chip in there what do you guys think? is it possible?</TD></TR></TABLE>
What are you talking about? You said it has a eprom with no chip? A eprom is a chip. Eprom is a rewritable chip you can clear with a uv light and a eeprom is rewritable you can clear with just a chip burner. Do you mean it is socketed with no chip?
What are you talking about? You said it has a eprom with no chip? A eprom is a chip. Eprom is a rewritable chip you can clear with a uv light and a eeprom is rewritable you can clear with just a chip burner. Do you mean it is socketed with no chip?
Honda-Tech Member
Joined: Aug 2006
Posts: 2,246
Likes: 0
From: Right near the beach BOI, Ga
Re: (thenick)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick »</TD></TR><TR><TD CLASS="quote">Will a CRX ZC hood fit a 90-91 USDM hatchback?</TD></TR></TABLE>
yep
Honda-Tech Member
Joined: Nov 2002
Posts: 6,725
Likes: 0
From: GA
Re: (gospeedgo1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gospeedgo1 »</TD></TR><TR><TD CLASS="quote">nice shots andy. what camera do you use if you dont mind me asking? </TD></TR></TABLE>
any digital slr will give you good results if you know what you're doing
full manual exposure trains the eye
still homeless....
any digital slr will give you good results if you know what you're doing
full manual exposure trains the eye
still homeless....
Honda-Tech Member
Joined: Dec 2004
Posts: 4,562
Likes: 0
From: Madison, WI, USA
Re: (b16_madman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16_madman »</TD></TR><TR><TD CLASS="quote">
any digital slr will give you good results if you know what you're doing
full manual exposure trains the eye
still homeless....</TD></TR></TABLE>
The picture of you crx loaded up with your stuff reminded me of moving home one year after school. It really is amazing how much stuff you can put in that small of a car.
any digital slr will give you good results if you know what you're doing
full manual exposure trains the eye
still homeless....</TD></TR></TABLE>
The picture of you crx loaded up with your stuff reminded me of moving home one year after school. It really is amazing how much stuff you can put in that small of a car.
Honda-Tech Member
Joined: Mar 2002
Posts: 1,517
Likes: 0
From: NoVA, US of A
Re: (b16_madman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16_madman »</TD></TR><TR><TD CLASS="quote">
still homeless....</TD></TR></TABLE>
i see that you're back in augusta eh...
still homeless....</TD></TR></TABLE>
i see that you're back in augusta eh...
