I never had an STD. I have 88 DX, and had a 90 DX, but no STDs. I have a CRX si, doors from a CRX DX, and a roof from a CRX HF, but no STDs, not even STD parts. I am confused?

 

He meant sexually transmitted diseases lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">I like to drink goats milk </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GarageAlchemist &raquo;</TD></TR><TR><TD CLASS="quote">i just had a fun ef day, slammed the front, its now just a hair over 2" off the ground, tires are tucked with massive camber 16x7, still scraping tar out, trunk/backseat floors are done, sanded and painted, painted all the trim molding, and started wet sanding.

Getting my bearings in a few days, then putting the block in. 170+ whp all motor d series, an-r compact header, ecutout, recaros, std civic.. it's going to be an intresting summer of pissing off b18c swapped civics

1) i'll take some pics, but i have a question about front traction bars, do they replace the actual cross member, or go under that ?.. i would assume they replace it, looks like it.

Just want to be sure

2) anyone run a 3 gallon fuel cell in the engine bay, i was thinking of switching to a fuel cell, so later on i can remove the fuel tank and run a custom fabbed rear mount turbo setup</TD></TR></TABLE>

Pics ftw or ban

 

anyone know anything about these mirrirs or where I could get some like them????
http://cgi.ebay.com/ebaymotors...QrdZ1

 

i know spoon style mirrors are played out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">anyone know anything about these mirrirs or where I could get some like them????
http://cgi.ebay.com/ebaymotors...QrdZ1</TD></TR></TABLE>


you asked where to get them, and then posted an ebay link.


try ebay.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">anyone know anything about these mirrirs or where I could get some like them????
http://cgi.ebay.com/ebaymotors...QrdZ1</TD></TR></TABLE>

Jdmshit has some I believe that isn't CF.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid &raquo;</TD></TR><TR><TD CLASS="quote">i know spoon style mirrors are played out</TD></TR></TABLE>

but you also said

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid &raquo;</TD></TR><TR><TD CLASS="quote">LOL do whatever you please to your car. </TD></TR></TABLE>

the F1, motorcycle, ganador, peep **** mirrors are played out
didnt really ask if they were played out, but thanks

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">


you asked where to get them, and then posted an ebay link.


try ebay. </TD></TR></TABLE>

I meant on here, I like to buy from H-T sponsors/ real people

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD &raquo;</TD></TR><TR><TD CLASS="quote">

Jdmshit has some I believe that isn't CF.</TD></TR></TABLE>

I saw those they also have a CF set too...i think ill call them
edit: its says they will fit a hatch "with slight modification" anyone know what that is?

 

i know, i said both. I said spoon mirrors ARE played out...i didnt say DONT get spoon mirrors.

But, you cant go wrong with them.

 

its just the only other option....stock

 

jsut buy m3 style mirrors to match your fenders.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">

I saw those they also have a CF set too...i think ill call them
edit: its says they will fit a hatch "with slight modification" anyone know what that is?</TD></TR></TABLE>

I think you might have to trim the base some and drill new holes. I'm not sure, but thats what had to be done to my Vision mirrors to make "Fit" on the Crx cause they mirrors were for a hatch.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid &raquo;</TD></TR><TR><TD CLASS="quote">i know, i said both. I said spoon mirrors ARE played out...i didnt say DONT get spoon mirrors.

But, you cant go wrong with them. </TD></TR></TABLE>

You're played out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">its just the only other option....stock </TD></TR></TABLE>

Yeah i know, i didnt want spoon mirrors so i bought some kewl mirrors that make for EG and DC only and bought new Honda block offs from JDMland.com then fabbed it up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">jsut buy m3 style mirrors to match your fenders. </TD></TR></TABLE>

just dreeessss up like a ninja turtle

 

Get these mirrors that look like a bottom end of a golf club.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GarageAlchemist &raquo;</TD></TR><TR><TD CLASS="quote">

2) anyone run a 3 gallon fuel cell in the engine bay, i was thinking of switching to a fuel cell, so later on i can remove the fuel tank and run a custom fabbed rear mount turbo setup</TD></TR></TABLE>

You mean like this?

 

yea, exactly like that, summit has one thast 8x8x15, would tuck in pretty easy. i'm running itb's so i got plenty of space on the tranny side

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EF8kid &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah i know, i didnt want spoon mirrors so i bought some kewl mirrors that make for EG and DC only and bought new Honda block offs from JDMland.com then fabbed it up. </TD></TR></TABLE>

You should try Fit mirrors. I mean it is the most bad *** car ever the mirrors are probably like hella bad ***. Don't they have an Xray vision mode, so at meets you can undress women at the touch of a button with them? Illest option ever. Only available on the pinnacle of automotive engineering known as the Honda Fit, or Jazz in Japan.

 

Im parting out my crx, im done..........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">Im parting out my crx, im done.......... </TD></TR></TABLE>

Buying a FIT?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">

Buying a FIT? </TD></TR></TABLE>

Nope im done.... no more honda pos for me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

Nope im done.... no more honda pos for me </TD></TR></TABLE>

I call dibs on the shell. I need it for my L series project I want to do.

 

ahhh yawn... been spending the night sanding my block girdle to a polish, hands are cramping but i want it done.. don't yea just love tedious repetitive handwork =\