The Official EF Discussion Thread
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: post ur EF pics (civicandy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy »</TD></TR><TR><TD CLASS="quote">how do they attach to the car?</TD></TR></TABLE>
Same as OEM, since they are molded from an OEM set. Holes would need to be drilled, I'm asuming, maybe clips of some sort. I haven't got that far with mine yet. I'll take a look under the car later and find out.
Same as OEM, since they are molded from an OEM set. Holes would need to be drilled, I'm asuming, maybe clips of some sort. I haven't got that far with mine yet. I'll take a look under the car later and find out.
.jpg)
Re: post ur EF pics (DUFFM4N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DUFFM4N »</TD></TR><TR><TD CLASS="quote">way over priced...cost on those are prolly around $25-$30, its sad how much ppl mark things up cuz of its "jdm worth"</TD></TR></TABLE>
you got to pay to play right? i think it would be more than that since you would have to have it shipped from japan. if they still even have them. I could be wrong tho.
you got to pay to play right? i think it would be more than that since you would have to have it shipped from japan. if they still even have them. I could be wrong tho.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: post ur EF pics (DUFFM4N)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DUFFM4N »</TD></TR><TR><TD CLASS="quote">way over priced...cost on those are prolly around $25-$30, its sad how much ppl mark things up cuz of its "jdm worth"</TD></TR></TABLE>
Actually mine were sold to me at cost, from a trust worthy source, in order to spread the word/sell a few sets, and the price was close to that of retail. If they only cost "$25-$30" to make, don't you think they would be produced, distributed, and stocked by retailers, as opposed to made-to-order?
Actually mine were sold to me at cost, from a trust worthy source, in order to spread the word/sell a few sets, and the price was close to that of retail. If they only cost "$25-$30" to make, don't you think they would be produced, distributed, and stocked by retailers, as opposed to made-to-order?
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: post ur EF pics (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">you got to pay to play right? i think it would be more than that since you would have to have it shipped from japan. if they still even have them. I could be wrong tho.</TD></TR></TABLE>
RHanDy G. sold a set to a friend of his in the US about 3 years ago for $350. Keep in mind an EF8/EF9 front was about that price back then, too.
RHanDy G. sold a set to a friend of his in the US about 3 years ago for $350. Keep in mind an EF8/EF9 front was about that price back then, too.
Re: post ur EF pics (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
RHanDy G. sold a set to a friend of his in the US about 3 years ago for $350. Keep in mind an EF8/EF9 front was about that price back then, too.</TD></TR></TABLE>
Why do you think i was saying it would be more? more than just 25-30
RHanDy G. sold a set to a friend of his in the US about 3 years ago for $350. Keep in mind an EF8/EF9 front was about that price back then, too.</TD></TR></TABLE>
Why do you think i was saying it would be more? more than just 25-30
Re: post ur EF pics (xDicktonesx)
I dunno, but I recently had the muffler section of an SP2 meant for a 3.5 Altima chopped and welded to my EF. It's friggin quiet and I love it!! But it sits like two inches off of the ground. I'm gonna save up and get the one meant for the 88-91 Civic 
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: post ur EF pics (24TEN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 24TEN »</TD></TR><TR><TD CLASS="quote">I dunno, but I recently had the muffler section of an SP2 meant for a 3.5 Altima chopped and welded to my EF. It's friggin quiet and I love it!! But it sits like two inches off of the ground. I'm gonna save up and get the one meant for the 88-91 Civic </TD></TR></TABLE>
hidden exhaust is gonna be the new ****. muffler/resonator somewhere before the gas tank and dumped in a way that wont kill you at a red light or turn your wheels black.
</TD></TR></TABLE>hidden exhaust is gonna be the new ****. muffler/resonator somewhere before the gas tank and dumped in a way that wont kill you at a red light or turn your wheels black.
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">http://www.optionsauto.com/pro...S-H05
My friend has the sp2 on his car and the tip looks goofy.</TD></TR></TABLE>
ill tell ya what...im going to make mine from some **** this weekend and ill post pics. real simple.
My friend has the sp2 on his car and the tip looks goofy.</TD></TR></TABLE>
ill tell ya what...im going to make mine from some **** this weekend and ill post pics. real simple.
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">xDicktonesx: so where did u find this exhaust and at what cost?</TD></TR></TABLE>
which one? if youre talking about the one on the maroon crx that looks real clean, the liscense plate should be a dead give away. the UK. i posted the link. its mongoose exhuast or something.
if youre talking about the greddy sp2...ebay
if youre talking about me building a shorty hidden dump exhaust its just something im going to do with a mig and some tubing and a 50 dollar 28 inch resonator and probably a flaring tool.
which one? if youre talking about the one on the maroon crx that looks real clean, the liscense plate should be a dead give away. the UK. i posted the link. its mongoose exhuast or something.
if youre talking about the greddy sp2...ebay
if youre talking about me building a shorty hidden dump exhaust its just something im going to do with a mig and some tubing and a 50 dollar 28 inch resonator and probably a flaring tool.
Honda-Tech Member
Joined: Jun 2005
Posts: 14,536
Likes: 0
From: DUFF GARDENS, CA, USA A OK
Re: post ur EF pics (UltimX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX »</TD></TR><TR><TD CLASS="quote">you got to pay to play right? i think it would be more than that since you would have to have it shipped from japan. if they still even have them. I could be wrong tho.</TD></TR></TABLE>
true...but we're talking about OEM replicas that are not made in japan out of ABS PLASTIC, not OEM material
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">Actually mine were sold to me at cost, from a trust worthy source, in order to spread the word/sell a few sets, and the price was close to that of retail. If they only cost "$25-$30" to make, don't you think they would be produced, distributed, and stocked by retailers, as opposed to made-to-order? </TD></TR></TABLE>
they cost only $25-$30 to make, the only reason that they're not mass produced and stocked by retailers is because retailers dont want to stock parts that arent going to move as fast as, say...Vsion replica corners for EG...they stock whats going to move fast, they say its "made-to-order" but what they really mean is..."ive gotta call a manufacturer, see if they have any in stock...and have them shipped here"
ive sourced whos producing these sideskirts...maybe ill sell a few on here considering ppl are willing to pay $325 shipped
true...but we're talking about OEM replicas that are not made in japan out of ABS PLASTIC, not OEM material
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">Actually mine were sold to me at cost, from a trust worthy source, in order to spread the word/sell a few sets, and the price was close to that of retail. If they only cost "$25-$30" to make, don't you think they would be produced, distributed, and stocked by retailers, as opposed to made-to-order? </TD></TR></TABLE>
they cost only $25-$30 to make, the only reason that they're not mass produced and stocked by retailers is because retailers dont want to stock parts that arent going to move as fast as, say...Vsion replica corners for EG...they stock whats going to move fast, they say its "made-to-order" but what they really mean is..."ive gotta call a manufacturer, see if they have any in stock...and have them shipped here"
ive sourced whos producing these sideskirts...maybe ill sell a few on here considering ppl are willing to pay $325 shipped
