The Official EF Discussion Thread
Re: (Jonknee)
i have a problem with my corner lights on my crx. im only getting 5-6v at the corner lights. ive checked the resistance on the ground. where can i look for the positive volts?
Re: (STREETWERKZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">guess what i'm ready to do...
</TD></TR></TABLE>
paint!
</TD></TR></TABLE>
paint!
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Mr_CRX)
nope..... 
im about to have a heart attack! this hobby is expensive!!!
the bumpers and moldings cost some bucks.
I'm getting the bay painted, bringing the car back, putting the motor back in and firing it up!!!! finally! i think i'll rock it without the moldings or bumpers for a few weeks until i can pay for the exterior to get painted. weight/wait reduction.
my wheels will be ready tomorrow too!!!
im about to have a heart attack! this hobby is expensive!!!
the bumpers and moldings cost some bucks.
I'm getting the bay painted, bringing the car back, putting the motor back in and firing it up!!!! finally! i think i'll rock it without the moldings or bumpers for a few weeks until i can pay for the exterior to get painted. weight/wait reduction.
my wheels will be ready tomorrow too!!!
Re: (STREETWERKZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">lovin' that HF bumper support! 
that radiator looks familiar too. </TD></TR></TABLE>
yessir
that radiator looks familiar too. </TD></TR></TABLE>
yessir
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">can you use DC rear disk setup on ef's?</TD></TR></TABLE>
Yeah, just use the Integra trailing arm and brake line, and for everything else, use EF stuff (LCA, toe compensator arm, etc).
Use CRX e-brake cables for the CRX, and 2dr Integra e-brake cables will work for a hatch, but I've never done one on a hatch.
Yeah, just use the Integra trailing arm and brake line, and for everything else, use EF stuff (LCA, toe compensator arm, etc).
Use CRX e-brake cables for the CRX, and 2dr Integra e-brake cables will work for a hatch, but I've never done one on a hatch.
Honda-Tech Member
Joined: Jul 2001
Posts: 6,779
Likes: 2
From: Land of the free, whoever told you that is your enemy
Re: (STREETWERKZ)
All these winter project pics are motivating. My KRX leaves for the shop to get roof swap, and painted tomorrow. Right now I am building a fiberglass speaker enclosure for my HF, putting an exhaust on the HF tomorrow too. I might be putting my Thermal on, and building a 3" for the KRX. I had no license until Febuary so I am getting a late start. It is hard to get to my shop 6 miles away on my Trek in a foot of snow. Anyway, now it is time to get **** done for me. I'm tired of driving around with 62hp. Time to multiply that a few times.
Oh yeah, everyone's **** looks real good.
Oh yeah, everyone's **** looks real good.
Honda-Tech Member
Joined: Nov 2005
Posts: 4,643
Likes: 0
From: Bakersfield
Re: (STREETWERKZ)
Damn^, Reminds me i need some new oem door gaskets and some moldings, stuff gets so expensive and it doesnt seem to end, u just keep buying and buying.
ugh and need floormats too, and some seats because mines are starting to tear and fade on the driver side..
ugh and need floormats too, and some seats because mines are starting to tear and fade on the driver side..
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Honda-Tech Member
Joined: Nov 2002
Posts: 5,846
Likes: 1
From: San Jose/ Monterey, ca, usa
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">My calipers are Rywire K20 track tested! </TD></TR></TABLE>
Good brakes right there...
</TD></TR></TABLE>Good brakes right there...
Honda-Tech Member
Joined: Nov 2005
Posts: 2,032
Likes: 0
From: CA, US
Re: (Rywire)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">EF peeps.... check it out!!!
https://honda-tech.com/zerothread?id=2286694</TD></TR></TABLE>
Hey Joe, did you get my PM about parts?
What's new in the EF world? 
https://honda-tech.com/zerothread?id=2286694</TD></TR></TABLE>
Hey Joe, did you get my PM about parts?
What's new in the EF world?
Honda-Tech Member
Joined: Sep 2004
Posts: 3,568
Likes: 0
From: Anne Arundel, MD
Re: (g2_teg_)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ »</TD></TR><TR><TD CLASS="quote">i went for a ride in my buddy's CRX today. i almost peed twice!
JRSC B18C5 ftw</TD></TR></TABLE>
JRSC B18C5 ftw</TD></TR></TABLE>
Honda-Tech Member
Joined: Mar 2004
Posts: 5,967
Likes: 3
From: San Diego, CA
Re: (Jonknee)
they arent as bad as you would think.
i priced out a k20 from an 08 civic w/ trans and it was a little bit more than i paid for one at hmotors. then again, i have an employee discount. but for a zero mile motor.... its not costing you your first born.
i priced out a k20 from an 08 civic w/ trans and it was a little bit more than i paid for one at hmotors. then again, i have an employee discount. but for a zero mile motor.... its not costing you your first born.