shut up

there is always a couple exceptions to this rule...a couple
and they were usually owned by 86 year old ladies and sat in the garage with a warm blanket over top of it to protect it

 

My 88 hf project

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">shut up

there is always a couple exceptions to this rule...a couple
and they were usually owned by 86 year old ladies and sat in the garage with a warm blanket over top of it to protect it</TD></TR></TABLE>

ya i wish i had one of those! i hate my front end. no matter what it will NEVER be perfect just part of owning an ef

 

I found a console at the junkyard, the one that joins the radio console to the shiftboot/armrest. It doesnt have a din and i was wondering if anyone knew what i could fit on there. Would love a cupholder but a din is fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Radim &raquo;</TD></TR><TR><TD CLASS="quote">I found a console at the junkyard, the one that joins the radio console to the shiftboot/armrest. It doesnt have a din and i was wondering if anyone knew what i could fit on there. Would love a cupholder but a din is fine.</TD></TR></TABLE>

U HAVE TO TAKE OFF THE BOTTOM PORTION OF THE ORIGINAL EF DASH CONSOLE AND SNAP THE NEW ONE ON

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">


I get clowned on by morons all the time about **** like this
what people tend to forget is these are phuckin 19+ year old cars
nothing and I mean NOTHING and EVERYTHING is not going to fit perfect. Even when purchased brand new. Weather conditions like hot and cold do this to metal along with every other man made material in the world.
I hope everyone who has ever said any kinda dumb *** comment about how my front end fits is reading these


someone needs to copy and paste this a FAQ thread </TD></TR></TABLE>

Trust me when i say this: Your front end can fit a lot better than it does now regardless of how old the part(s) are. It takes time and experience to get it to fit good. Have u seen my front end? Not perfect, but its pretty damn good for how 'old' the parts are. Now u should have seen my front end when i first got the car...and even though it wasnt a jdm front, it was absolutely terrible.

 

my front filler can be fixed if i purchased another one.
you can only flex that piece so much before it just crumbles. Or end the end its just going to have creases in it
my hood is a mystery and I think its because of the T-bar
it pulls the hood down lower in the front. But the T-bar lines up perfect with the bolt holes on the frame, and lines up perfect with the headlights.
Fenders line up perfect as well.
my passenger side door is a lost cause.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">

U HAVE TO TAKE OFF THE BOTTOM PORTION OF THE ORIGINAL EF DASH CONSOLE AND SNAP THE NEW ONE ON</TD></TR></TABLE>

I did that it's on, but it's missing the pocket above the ashtray/lighter. Wanted to know if the pocket off another car fit. or maybe a cupholder.

 

i have one of those in my garage
its just a extra tray
its under the radio right??

 

I love you, Fiber Images



(before I took everything left on the car apart this weekend of course)



*doh* projectors look crooked because I haven't aimed them yet let alone fire them up on the car


Modified by 1989CivicSi at 5:37 PM 7/31/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">my front filler can be fixed if i purchased another one.
you can only flex that piece so much before it just crumbles. Or end the end its just going to have creases in it
my hood is a mystery and I think its because of the T-bar
it pulls the hood down lower in the front. But the T-bar lines up perfect with the bolt holes on the frame, and lines up perfect with the headlights.
Fenders line up perfect as well.
my passenger side door is a lost cause.</TD></TR></TABLE>

Anything can be put into line with enough time and dedication

For the wavy bumpers, purchase better allen-head hardware and go to town with a heatgun. I probably spent maybe 2-3 hours just shooting the **** with friends and lining up my Fiber Images hood just to rip it off right afterwards to pull out the motor

 

my bumper is fine is the front filler piece that makes the bumper look like its off.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi &raquo;</TD></TR><TR><TD CLASS="quote">I love you, Fiber Images

(before I took everything left on the car apart this weekend of course)



*doh* projectors look crooked because I haven't aimed them yet let alone fire them up on the car


Modified by 1989CivicSi at 5:37 PM 7/31/2008</TD></TR></TABLE>

Looks good eric.
Now get that one seven in there and take it for a drive.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

Looks good eric.
Now get that one seven in there and take it for a drive.</TD></TR></TABLE>

Haha, I would but once again I am back in SoCal (this time until Christmas ). Only had 4 days off this time around, but I got a ridiculous amount of work done. Hopefully with the month I get off in December, I'll finally be able to drive the car again...then tear it apart again to prep for paint . Just need to do a little more restoration and finish re-doing the entire car/engine harness then the full brakelines. Among other things

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">i have one of those in my garage
its just a extra tray
its under the radio right??</TD></TR></TABLE>
Yup that is the one.