does anyone know where I can buy just the drain elbow that gets welded to the oil pan? I bought a use kit that came with the oil lines but no block adapter (which I have since bought) and no drain tube for the oil pan. I really don't want to have to buy a used oil pan. any help would be greatly appreciated.

 

We use a 3/8 male thread to 1/2 hose barb. Found in the homedepot plumbing section, as well as many other possible fittings.

 

well that sounds more like a fitting... what I'm talking about is something similar to this:

http://www.atpturbo.com/Mercha...e=OIL

but with a 90* bend. the return line is the standard greddy line, just a piece of small radiator hose is what it looks like...there are no fittings on it.

 

 

that looks like it might work, butdouldn't it need to come out farther to clear the lip of the pan?

 

That will be a question for you. I didn't suggest the 90 degree.

 

any other suggestions? I found something on hahn racecraft website, but when I called them the message said they were closed indefinately.

 

i got a straight one off a greddy that you may have..

 

cool. can you please save it for me...I'll be getting back on the 6th or 7th. your username looks familiar...I think I bought the CTR header off of you when I was still in the NA bseries mode.

 

yes that's me, sure if your willing to pick it up.