The Official EF Discussion Thread
Honda-Tech Member
Joined: May 2003
Posts: 2,087
Likes: 0
From: The Filthy South, USA
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">LOL!</TD></TR></TABLE>
x2. Pull a HatchMo and do as my sig says.
x2. Pull a HatchMo and do as my sig says.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (STDClayton)
but its not like I can kick the UPS dudes *** and save everyones parts........
I wish I could...trust me I would.
they pride theirselves on timely, safe shipping, but its far from that, throwing ****, stepping on stuff, leaving **** out in the rain....they dont care though and you really cant change that and thats sad. Like those mouldings I got from Na all the Way not like the USDM mouldings are anything special, but I saw pics of those before he sent them didnt have a ding in them. Now a USDM moulding with no dings in it is rare. Now they are bent in two places
I wish I could...trust me I would.
they pride theirselves on timely, safe shipping, but its far from that, throwing ****, stepping on stuff, leaving **** out in the rain....they dont care though and you really cant change that and thats sad. Like those mouldings I got from Na all the Way not like the USDM mouldings are anything special, but I saw pics of those before he sent them didnt have a ding in them. Now a USDM moulding with no dings in it is rare. Now they are bent in two places
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
Honda-Tech Member
Joined: May 2003
Posts: 2,087
Likes: 0
From: The Filthy South, USA
Re: (STDClayton)
Man, so I replaced my radiator today and I had to ghetto rig it. I'm pretty sure it's an 88-89 radiator because the right radiator upper bracket thingy doesn't fit (zipties FTW). Also, the nipple that comes from just under the radiator cap was broken off with no room to secure the coolant overflow tank....so...I went to Home Depot and got a 3/16" brass fitting used to connect two plastic tubes, put that in the hole where the nipple was and used some industrial Loctite glue 
.
But, the good news is that I was able to make from front bumper look a little better than before. It's not as funky as before, so that's cool. I may throw my MKIII Jetta/GTI lip on there, but I may wait until I pick up a 90 USDM front from Tennessee later this month. I don't know.
.But, the good news is that I was able to make from front bumper look a little better than before. It's not as funky as before, so that's cool. I may throw my MKIII Jetta/GTI lip on there, but I may wait until I pick up a 90 USDM front from Tennessee later this month. I don't know.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (HatchMo)
UPS strikes again. Them and FedEx are making Honda parts more rare by the day. I had a bad feeling when that knumb nuts was dropping the moldings into that box. I'll pack everything myself from now on. 
Them and FedEx are making Honda parts more rare by the day. I had a bad feeling when that knumb nuts was dropping the moldings into that box. I'll pack everything myself from now on.
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
i always use fedex, but my frontend came roadway express, im picking it up tonight, I will let everyone know how it goes. If its beat, i will get wrist control and pull out my gun.
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (HatchMo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo »</TD></TR><TR><TD CLASS="quote">i always use fedex, but my frontend came roadway express, im picking it up tonight, I will let everyone know how it goes. If its beat, i will get wrist control and pull out my gun.</TD></TR></TABLE>
I want to know for sure. Take pics of how it's packaged before you open it. I may have Adam send my hood through them if they're good.
I want to know for sure. Take pics of how it's packaged before you open it. I may have Adam send my hood through them if they're good.
Joined: Oct 2006
Posts: 263
Likes: 0
From: Edmonton, alberta, Edmonton
so it's been a while. let me giveyou a run down of what's happened in the last little while. hit a curb going 60 because other people don't know how to drive and pushed the axle into the tranny wrecking the fender i just replaced and ruining a rim and tire. so that was about a month and a half a go since then it's been snowing and yester day i went to wash the car. what do i find cancer spots starting on my passenger door. i don't have any idea on how to start body work and i'm scared i'm just going to wreck the car more if i touch it. i went to my local shop and they told me my b16W lsd tranny should be here friday. awsome i'm short 200 bucks because i got fired monday. and i broke one of the fog lights on my car so now i have a bumper with a hole on one side and a foglight on the other. besides that the guy told be to bring in my fender and see if it's fixable.
Senior Member
Joined: Dec 2004
Posts: 10,137
Likes: 0
From: EMAIL ME at Chase@ChaseBaysOnline.com
Re: (HatchMo)
Flea market, Mongomery, its just like, its just like a mini-mall, its just like a mini-mall.
http://www.youtube.com/watch?v=FJ3oHpup-pk
Montgomery, Alabama
Take the time to watch to spoofs too ahaha
http://www.youtube.com/watch?v=FJ3oHpup-pk
Montgomery, Alabama
Take the time to watch to spoofs too ahaha
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (HatchMo)
Goals for this week:
1. buy or find(used) door mouldings
1.5. or find 88-89 bumpers and front support so I can buy new mouldings all the way round.
2. loose 10 lbs. (doubt it)
3. order corner (getting GHEY amber ones), bumper lights (clear, amber? car is black)??????????????????????????????????
? do the dual buld 91 corners alternate when they flash? so I can just wire the side marker to the bulb that doesnt stay on when the lights are on?
4. Get shell watersanded.
5. find or buy new window belts.
6. MOUNT and balance tires on rims
Parts request:
91 HATCH
door panels
window belts
door mouldings and a (believe its called) door garnish goes on above door handle and hides place behind front window
OR 88-89 bumpers close to GA
front support
like to get this thing done before I HANG MYSELF
1. buy or find(used) door mouldings
1.5. or find 88-89 bumpers and front support so I can buy new mouldings all the way round.
2. loose 10 lbs. (doubt it)
3. order corner (getting GHEY amber ones), bumper lights (clear, amber? car is black)??????????????????????????????????
? do the dual buld 91 corners alternate when they flash? so I can just wire the side marker to the bulb that doesnt stay on when the lights are on?
4. Get shell watersanded.
5. find or buy new window belts.
6. MOUNT and balance tires on rims
Parts request:
91 HATCH
door panels
window belts
door mouldings and a (believe its called) door garnish goes on above door handle and hides place behind front window
OR 88-89 bumpers close to GA
front support
like to get this thing done before I HANG MYSELF
Honda-Tech Member
Joined: Sep 2001
Posts: 6,045
Likes: 1
From: The burbs of illadelph, USA
Re: (-NA-aLL-thE-wAy-)
I used to think DHL was a step above fedex and ups, but today i received my f1spec bucket only to find a slit in the box and no rails 
CBE, little late to be planning out the week, its weds duude
CBE, little late to be planning out the week, its weds duude
Honda-Tech Member
Joined: Feb 2003
Posts: 5,297
Likes: 0
From: I love the east coast, OH
K-series EFs... What about the Shifter box.
Bart did the ep3 shifter, but i kinda want to stay incognito and stay in the stock postion. Didn't Ryan get the prototype karcepts? I checked their website but there isnt any info.
Bart did the ep3 shifter, but i kinda want to stay incognito and stay in the stock postion. Didn't Ryan get the prototype karcepts? I checked their website but there isnt any info.
