<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

Ive also seen a toasted ecu do that. I know Shane mentioned the rats got to his harness too...yikes.</TD></TR></TABLE>

Mek, did you store the car with the battery still connected?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">Suckers!

Hows that wagon kyle?</TD></TR></TABLE>

good. i like the starting point that it is and that 250+ awhp is attainable for less than 1500 dollars.

huge step away from the hondas i was driving but the side airbags and the fact the rear seat actually fits the kids seats is a huge boner for me. i can actually travel somewhere with my chillins and not worry about all of us dying if we get t-boned.


what's up with you. i ahven't followed anything lately. are you resurrected teh sedan, actually using your hatch?

 

How<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

I'll sell u my FI one (for ef8/9 front end) . It weighs a fraction of what the metal oem one is. I know i lost a few mpg making the switch </TD></TR></TABLE>

Are you also selling it for a fraction of what the OEM metal one is? J/p, Pming you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">the rex is looking pretty sleeper.

</TD></TR></TABLE>

thanks. this is my favorite pic i've taken in my life:



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">that hood doesn't look to fit bad, and is sleeper as [freak] haha!!</TD></TR></TABLE>
it fits pretty shitty. trust me.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">Suckers!

Hows that wagon kyle?</TD></TR></TABLE>
are you talking to me? which wagon would you be referring to?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXT &raquo;</TD></TR><TR><TD CLASS="quote">

Mek, did you store the car with the battery still connected?</TD></TR></TABLE>

Dont think it matters b/c he said he tried to start it. Best of luck to him.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MOE@Hyper16Valve &raquo;</TD></TR><TR><TD CLASS="quote">You should of bought the part from STREETWERKZ he works for POWER HOnda in costa mesa JOE can beat any price thats for real...</TD></TR></TABLE>

lol thats a joke. I hit him up on here to get some parts, (we've joked back and forth and spoken a few times, thought we had a good repor) ...... charged me retail +++ , and sales tax. I know costa mesa honda has to get thiers...but when you come on H-T saying Ill beat this price and hook you up, then you take me through a routine transaction at work. i could have went to the parts counter at my local honda dealer and paid retail.
no beef i guess ill just stick with majestic honda over the internet from now on

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX &raquo;</TD></TR><TR><TD CLASS="quote">


If you don't have a CEL, and you jumper the wire and get a solid CEL, that means you have no codes. This is normal.

If you have a CEL and jumper the wire and get a solid CEL, that's a different story. I've seen that be a bad programming of chip, a bad connection on the socket, etc. </TD></TR></TABLE>

Ok everything is fine, I spliced the wires back together, replaced the alternator fuse and it started right up. Now I just have to get rid of my oil pressure gauge and line and go back to stock. I have never seen a steel braided line just leak like this, the braid isnt cut or anything.

Anyone have a stock oil pressure switch they can part with?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mekanism &raquo;</TD></TR><TR><TD CLASS="quote">

Anyone have a stock oil pressure switch they can part with?</TD></TR></TABLE>

I have a bunch of extra sensors laying around. What does it look like? I can never remember which ones are which

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MOE@Hyper16Valve &raquo;</TD></TR><TR><TD CLASS="quote">You should of bought the part from STREETWERKZ he works for POWER HOnda in costa mesa JOE can beat any price thats for real...</TD></TR></TABLE>


LOL




0.5j/k

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">

lol thats a joke. I hit him up on here to get some parts, (we've joked back and forth and spoken a few times, thought we had a good repor) ...... charged me retail +++ , and sales tax. I know costa mesa honda has to get thiers...but when you come on H-T saying Ill beat this price and hook you up, then you take me through a routine transaction at work. i could have went to the parts counter at my local honda dealer and paid retail.
no beef i guess ill just stick with majestic honda over the internet from now on </TD></TR></TABLE>


please do.


for your info.... there is nothing i can do about sales tax. i dont nickle and dime, if your order isnt $500+, i dont waste my time.

for lookie loo people that dont intend on buying.... i dont waste me time.

to tell you the truth.... you wasted my time. i dont remember the parts you asked about and dont remember the prices.

locals, friends, and people who have been serious about these parts have been treated very well. and yes, they've shopped around.

when someone PMs me on H-T asking about one or two small parts and comes at me with a majestic parts list, im not bending over backwards for them. go to majestic.


I have never quoted anyone RETAIL +++, EVER.

if you want to start over, PM me the parts you want. i'll give you a REAL quote.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">
PM me the parts you want. i'll give you a REAL quote.</TD></TR></TABLE>


Hey Joe...

Emailed you about a big *** order. get back to me when you can.

 

Will be pm'ing you Joe when I'm start prepping my car for paint again and need all new rubber/trim. Didn't want to bother you with the engine parts I ordered from Acura because you said you could only look at Honda parts lists

 

Joe is a good dude, but why would he go out of his way at work while trying to field a million phone calls at one time to look up 10 interior screws or a seat bolt. I worked parts, and **** is pretty hectic. If your making a HUGE purchase IM POSITIVE joe will make it worth your and his time to go through his dealership!

Kyle, im working on the hatch now, its accually damn near done. Pulled the motor and tranny again this past week, and pulled everything out of the bay for paint and a new tranny/clutch. The sedan, is probably going to have to wait till next winter. Money is tight and im trying to move myself outta my parents house haha.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by problem_si &raquo;</TD></TR><TR><TD CLASS="quote">


Hey Joe...

Emailed you about a big *** order. get back to me when you can.

</TD></TR></TABLE>


i got this order handled and responded to your email.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi &raquo;</TD></TR><TR><TD CLASS="quote">Will be pm'ing you Joe when I'm start prepping my car for paint again and need all new rubber/trim. Didn't want to bother you with the engine parts I ordered from Acura because you said you could only look at Honda parts lists </TD></TR></TABLE>

the trim pieces are what everyone has been asking about lately. feel free to PM me anytime. if you get me the acura part numbers i can cross-reference them in my computer. i have quite a few acura parts in stock. plus an acura dealership is across the street.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">Joe is a good dude, but why would he go out of his way at work while trying to field a million phone calls at one time to look up 10 interior screws or a seat bolt. I worked parts, and **** is pretty hectic. If your making a HUGE purchase IM POSITIVE joe will make it worth your and his time to go through his dealership!</TD></TR></TABLE>
you're exactly right. i get 100s of PMs a week from random people. dozens of phone calls from people i dont know asking for discounts. and tons of lookie-loos that dont buy anything, they just want to know "how much" or "if i can get".


to be honest, i confused CBE for someone else. and im sorry if i quoted him a wrong price.

 

 

woody that **** is mean

 

thanks my dude.. been driving it around my block. gettin tuned soon

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408wdy &raquo;</TD></TR><TR><TD CLASS="quote">thanks my dude.. been driving it around my block. gettin tuned soon </TD></TR></TABLE>

Any more pics? Whats it built for drag racing?

 

did some car **** today

threw on a new valvecover on the rex and bought a spoooon header for a good deal

 

white valve covers look sexy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">Kyle, im working on the hatch now, its accually damn near done. Pulled the motor and tranny again this past week, and pulled everything out of the bay for paint and a new tranny/clutch. The sedan, is probably going to have to wait till next winter. Money is tight and im trying to move myself outta my parents house haha.</TD></TR></TABLE>
who is Kyle?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ &raquo;</TD></TR><TR><TD CLASS="quote">
who is Kyle?</TD></TR></TABLE>

since nobody else is answering you...kylefakesi-r. and I would assume that YOU are also Kyle.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jonknee &raquo;</TD></TR><TR><TD CLASS="quote">white valve covers look sexy</TD></TR></TABLE>

X2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pandarex &raquo;</TD></TR><TR><TD CLASS="quote">

X2</TD></TR></TABLE>
hellz yea..and it was freee so i love it

 

chase's old valve cover?