excuse that filthy freakin interior....i had a leak that destroyed my carpet.

 

Makes me miss my old FI hood

 

mine fits kinda shitty. i think my hinges might be bent, or the hood isn't made perfect.

 

Is your hood FI or ViS? Looking at getting a CF hood myself pretty soon

 

Fiber Images.

 

damn, I want one of those hoods, but at over $700 its wayy too pricey for me.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXT &raquo;</TD></TR><TR><TD CLASS="quote">If I'm not mistaken a solid CEL means limp mode or O2 sensor. I forget which, but I'm pretty sure it's limp mode. check the wiring to the map sensor.</TD></TR></TABLE>


SOLID CELL MEANS BAD/FRIED ECU, I THINK

 

Just talked to Joseph Davis and he tells me Limp mode as well. I dont think youd get a cel at all if the ecu didnt work, because that light would have nothing to tell ti to light...corrrect? I still say check the map sensor wiring.

 

Mine didn't fit that well either, but I added in some rubber bump-stop adjusters like the stock hood has, and got it decent. I just loved how thin and light it was.

 

I've always thought that car was ****.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16CRXT &raquo;</TD></TR><TR><TD CLASS="quote">damn, I want one of those hoods, but at over $700 its wayy too pricey for me.</TD></TR></TABLE>

i paid $100 less then you were quoted. Also, the price i got directly from Fiber Images was $650shipped. and im further away from them then you are.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX &raquo;</TD></TR><TR><TD CLASS="quote">Mine didn't fit that well either, but I added in some rubber bump-stop adjusters like the stock hood has, and got it decent. I just loved how thin and light it was.</TD></TR></TABLE>
looks like it fits a lot nicer then mine.

 

my vis fits like crap too. wonder if seibon fits good?

 

Is Fiber Images still in business? For some reason I thought they'd gone under or closed shop to work on some other projects.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pandarex &raquo;</TD></TR><TR><TD CLASS="quote">my vis fits like crap too. wonder if seibon fits good?</TD></TR></TABLE>
i had a Seibon on my DA, and it fit better then my FI hood fits. but again, i think my hinges are bent.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi &raquo;</TD></TR><TR><TD CLASS="quote">Is Fiber Images still in business? For some reason I thought they'd gone under or closed shop to work on some other projects. </TD></TR></TABLE>
go to their website, get their contact info, and call them.

 

the rex is looking pretty sleeper.

 

any one got some suspension stuff they wanna sell on the cheap?

 

Code 0 is one solid light when you check it
it caused form a faulty ECU or wiring to the ECU
It could happen to ways that I know of from my experience.
I faulty ECU
or if your ECU is chipped and u don't have the chip in place you'll get a code 0
which will cause limp mode

I'm not 100% sure on it but thats what happen to me


Modified by vega_ROCKS at 8:39 PM 5/1/2008

 

that hood doesn't look to fit bad, and is sleeper as [freak] haha!!

 

ben smells of cabbage

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kylefakesi-r &raquo;</TD></TR><TR><TD CLASS="quote">ben smells of cabbage</TD></TR></TABLE>

 

Suckers!

Hows that wagon kyle?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">Code 0 is one solid light when you check it
it caused form a faulty ECU or wiring to the ECU
It could happen to ways that I know of from my experience.
I faulty ECU
or if your ECU is chipped and u don't have the chip in place you'll get a code 0
which will cause limp mode

I'm not 100% sure on it but thats what happen to me


Modified by vega_ROCKS at 8:39 PM 5/1/2008</TD></TR></TABLE>


If you don't have a CEL, and you jumper the wire and get a solid CEL, that means you have no codes. This is normal.

If you have a CEL and jumper the wire and get a solid CEL, that's a different story. I've seen that be a bad programming of chip, a bad connection on the socket, etc.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX &raquo;</TD></TR><TR><TD CLASS="quote">


If you have a CEL and jumper the wire and get a solid CEL, that's a different story. I've seen that be a bad programming of chip, a bad connection on the socket, etc. </TD></TR></TABLE>

Ive also seen a toasted ecu do that. I know Shane mentioned the rats got to his harness too...yikes.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1989CivicSi &raquo;</TD></TR><TR><TD CLASS="quote">Is Fiber Images still in business? For some reason I thought they'd gone under or closed shop to work on some other projects. </TD></TR></TABLE>

I'll sell u my FI one (for ef8/9 front end) . It weighs a fraction of what the metal oem one is. I know i lost a few mpg making the switch