the k24 is 19-20 mm taller then the k20. it is usually higher up then the hood. im not sure if you could lower it down with some spacers or washers.

 

hey guys I need your help again, I'm doing a dpfi to mpfi swap and I cNnot find a si harness plug for the dizzy anywhere so can anyone help me with a dx harness to a si dizzy diagram, I tried following rywires but I think he uses a si harness plug. Thanks

 

you need the 8 pin round plug?? Ill send you one if thats what you are asking

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rywire &raquo;</TD></TR><TR><TD CLASS="quote">you need the 8 pin round plug?? Ill send you one if thats what you are asking</TD></TR></TABLE>

Rywire.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rywire &raquo;</TD></TR><TR><TD CLASS="quote">you need the 8 pin round plug?? Ill send you one if thats what you are asking</TD></TR></TABLE>

Yes, I need one of those, but I'm trying to findout if you can wire a round dizzy(si) plug to a square(dx) harness without using a si harness plug? I tried toread the diagram on your site rywire but it became confusing because I didn't have a blue/green wire and a purple wire, along with a few others I think. Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">

Rywire. </TD></TR></TABLE>

heck yea.

<FONT SIZE="5">Ryan Basseri! Can't bust 'em!!</FONT>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bury Your Dead &raquo;</TD></TR><TR><TD CLASS="quote">

heck yea.

<FONT SIZE="5">Ryan Basseri! Can't bust 'em!!</FONT>
</TD></TR></TABLE>

That's funny...Ryan was Buddy Lee for Halloween last year

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gourley &raquo;</TD></TR><TR><TD CLASS="quote">

Yes, I need one of those, but I'm trying to findout if you can wire a round dizzy(si) plug to a square(dx) harness without using a si harness plug? I tried toread the diagram on your site rywire but it became confusing because I didn't have a blue/green wire and a purple wire, along with a few others I think. Thanks</TD></TR></TABLE>


I have never seen what exactly a a6 distributor looks like
but if it looks anyhting like a z6 distributor plug i can go and take pictures of mine so you can see
and find my notes that i have

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nickrps &raquo;</TD></TR><TR><TD CLASS="quote">

That's funny...Ryan was Buddy Lee for Halloween last year </TD></TR></TABLE>

youre kidding me. im telepathic. he gets mad when i say that he fits perfect in a jdm crx rear seat.

 

^^^ ahahahahahahhaa

 

I'm not sure what a z6 dizzy lookeds like so idk

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">


I have never seen what exactly a a6 distributor looks like
but if it looks anyhting like a z6 distributor plug i can go and take pictures of mine so you can see
and find my notes that i have</TD></TR></TABLE>

NO your z6=obd1 and he is obd0

 

LOL at you guys... No I wasent that doll for Halloween...

gourley you got pm..

 

I'm going to take a guess and assume they are the same
Because you have to do a mpfi swap in order to use a z6
and plus some people use a a6 distributor on their z6 as well

any hoot I'll see what I can find

 

um, no... vega, please let me deal with this... a6 and z6 dizzy plugs are different

 

yeah i know the plugs are different but aren't the wires the same??

and you have to swap two wires and add two??


something about a oragne/blue wire or maybe it was a orange/white wire...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rywire &raquo;</TD></TR><TR><TD CLASS="quote">um, no... vega, please let me deal with this... a6 and z6 dizzy plugs are different </TD></TR></TABLE>

im tellin ya folks, you cant bust 'em. ryan basseri made a swap harness for a nsx motor into an 84 crx with a hybrid insight electric motor in the front. with an s2000 guage cluster. in 1999.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bury Your Dead &raquo;</TD></TR><TR><TD CLASS="quote">

im tellin ya folks, you cant bust 'em. ryan basseri made a swap harness for a nsx motor into an 84 crx with a hybrid insight electric motor in the front. with an s2000 guage cluster. in 1999.</TD></TR></TABLE>

 

 

 

I love that yellow hatchback. I wanna see a front angle shot where it's profile of the front end.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rywire &raquo;</TD></TR><TR><TD CLASS="quote">um, no... vega, please let me deal with this... a6 and z6 dizzy plugs are different </TD></TR></TABLE>


i had to.

 

thats why I said I'm going to take a guess

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">thats why I said I'm going to take a guess</TD></TR></TABLE>

no one aint mad atcha.

 

my new popo inspired 2.25" stock muffler exhaust. Goes 2.5" to two resonators halfway up the car then reduces to 2.25". 2.25 was the biggest oem muffler the shop had. He installed new hanger points also. Where the tow hooks are in the back. the muffler doesn't move at all. you can kick it or anything and it doesn't budge. I love it.