what is redzcstandard mounting in his bay? that's some serious fab work

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">what is redzcstandard mounting in his bay? that's some serious fab work</TD></TR></TABLE>

C32 using the C2D adapter plate. waiting to see if it will clear the hood.

 

 

^ so how many people sitting in the car? j/p dood

Street sweeper style!

 

the city can now hire him to pick up cigarette butts on the side of the road. hehehe

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">C32 using the C2D adapter plate. waiting to see if it will clear the hood. </TD></TR></TABLE>

hahahahaha

its an F22 mated to a D trans w/quaife. ... needed the huge half-moon cutout to clear a custom Fluidampr crank pulley.

car ran 11.7's with the old engine/smaller turbo. hoping for low 11's high 10's, and an engine that doesnt eat main bearings for no reason

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGe. &raquo;</TD></TR><TR><TD CLASS="quote">Speaking of mufflers, if I had an ED/EF I'd be ALL OVER this:

http://cgi.ebay.com/ebaymotors...ZWDVW



HKS </TD></TR></TABLE>For that price it's not worth it, especially since it's not even the whole exhaust

 

exactly $400 for a muffler, is not worth it.


get the whole catback.... new in the box for $421.60 shipped to your door.
https://www.raceinspired.com/p....aspx

 

I have the HKS on my DA. Best Exhaust evar!

 

Yup my thoughts exactly

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">I have the HKS on my DA. Best Exhaust evar!
</TD></TR></TABLE>

Best in what way? Sound and appearance, sure, but as far as quality goes, thats another story.

 

will, what happened to those silver 4 spoke wheels? the DA looked hot on those!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

Best in what way? Sound and appearance, sure, but as far as quality goes, thats another story.</TD></TR></TABLE>

I'm not into the big tip exhausts, RSR, Greddy, and especially the taiwan mufflers. I like the stealth look of the HKS. Quality? I know of people who have had the HKS for years and still lookin good. Maybe its because we're in CA and dont have to deal with rust.
I'm old school, I like the look of the old HKS, Borla tips, Stromung, and just the basic tip of the Dynomax and FLowmaster mufflers.

Joe, I still have those wheels, they were prototypes and not sure if they are going to release the wheel here in the US. so technically, theres only that set available.

 

what kind of front camber adjusting ball joints do you guys recommend? I might need a set so I dont murder my azenis in 500 miles.

 

man i LOVE thos 4 spokers.. those arent axis?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redzcstandardhatch &raquo;</TD></TR><TR><TD CLASS="quote">man i LOVE thos 4 spokers.. those arent axis?</TD></TR></TABLE>


hehe, thats the same thing i asked him when i first saw em.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redzcstandardhatch &raquo;</TD></TR><TR><TD CLASS="quote">man i LOVE thos 4 spokers.. those arent axis?</TD></TR></TABLE>

They are not the Axis. they were based on those wheels, same place where axis manuf and buys their wheels. But they are a new design with a deeper lip.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">

I'm not into the big tip exhausts, RSR, Greddy, and especially the taiwan mufflers. I like the stealth look of the HKS. Quality? I know of people who have had the HKS for years and still lookin good. Maybe its because we're in CA and dont have to deal with rust.
I'm old school, I like the look of the old HKS, Borla tips, Stromung, and just the basic tip of the Dynomax and FLowmaster mufflers.


</TD></TR></TABLE>

Im kind of the same way, which is why i want to hack off my greddy tip. My problem with the HKS is that it uses super thin sheet metal for the muffler construction. How do i know? I cut one up before after it cracked to **** around the inlet and fell off my buddies car, lol. I still have the tips which i will use on a later project .

 

those do look better than the axis

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redzcstandardhatch &raquo;</TD></TR><TR><TD CLASS="quote">those do look better than the axis</TD></TR></TABLE>

Well thank you. you're making me blush.

 

best friends.

 

You cheating on me Adam. Shame on you.

 

seriously dave. stop stalking me. haha

i love wil, i've had several LONG conversations with him (well, years ago...)

wil, this is adam from chicago (and ef-honda.com).. HOWDY!

 

I cant help i have an EF to there wise guy. So of course i am going to have the thread in my recents. Cant help it i have no life.

 

hhehehe