DA Integra's Only
I got on the street and did the first actual pull on the street and when I let off the throttle it blew the gasket clean out and had a 3.5k idle. Turned around and tried to go back real quick but he had JUUUUST left and I didn't want to bother. I'll post up my graph later and you can see if you think that's what the issue was.
I know PSI and power vary however you've told me your setup and 18 psi at that power level, there is def a HUGE boost leak somewhere. I'd fix the gasket and pressure test the system to see if there are any more leaks.
so i finally got my DA back on the road, all it was, was my clutch bearing release spring! all that hard work for a 7 dollar part, also changed my tie rod ends and lower ball joints. Quick question does anybody use roll center adjusters? somebody told me about them but i looked and found only Blox brand and im a little skeptical about Blox.
I made a braket to hold them secure... Not really made but bent something to work in it's place lol. Been using them like that for 4 years with no issue.
ok quick question for you guys:
when ever i go over bumps or a hard turn i get a little clunk felt in the wheel.
its not a axle replaced both
not a inner tie rod replaced both not outter tie rods put pliers on them and have no movement. wheels are on tight so not that the rack is newer. just can not figure out what it is.
when ever i go over bumps or a hard turn i get a little clunk felt in the wheel.
its not a axle replaced both
not a inner tie rod replaced both not outter tie rods put pliers on them and have no movement. wheels are on tight so not that the rack is newer. just can not figure out what it is.
ok quick question for you guys:
when ever i go over bumps or a hard turn i get a little clunk felt in the wheel.
its not a axle replaced both
not a inner tie rod replaced both not outter tie rods put pliers on them and have no movement. wheels are on tight so not that the rack is newer. just can not figure out what it is.
when ever i go over bumps or a hard turn i get a little clunk felt in the wheel.
its not a axle replaced both
not a inner tie rod replaced both not outter tie rods put pliers on them and have no movement. wheels are on tight so not that the rack is newer. just can not figure out what it is.
Just wanted to get an update up on here, it's been awhile.


most recent shots. car will be getting new paint, wheels, and other goodies next season
sorry for the huge pics lol


most recent shots. car will be getting new paint, wheels, and other goodies next season

sorry for the huge pics lol
Hey do you guys think $2500 is a good price for a mint horizon grey 93 integra sedan with 90k miles on it? 5 speed,no rust, new timing belt and water pump and all stock except sony deck.
From what I can tell it is a good deal, but just want some thoughts before I jump on this, as I still think it is a fairly high price for a da.
From what I can tell it is a good deal, but just want some thoughts before I jump on this, as I still think it is a fairly high price for a da.
Hey do you guys think $2500 is a good price for a mint horizon grey 93 integra sedan with 90k miles on it? 5 speed,no rust, new timing belt and water pump and all stock except sony deck.
From what I can tell it is a good deal, but just want some thoughts before I jump on this, as I still think it is a fairly high price for a da.
From what I can tell it is a good deal, but just want some thoughts before I jump on this, as I still think it is a fairly high price for a da.





