my paint is holding up fine, havent had any problems with it, how much are you trying to spend on paint? i wouldnt suggest getting their cheapest option, if i didnt need SO MUCH body work i would have gotten the 3rd highest, but just body work alone was around $800

 

thanks for the help

 

send me pics, my ls/v is needing bigger cams then the gsr's. i had a set of stg 3 cams lined up but they feel through. i would run those pro2's i can get they are a killer price 550 i think but i dont feel like dropping the extra cash into the pro valvetrain and everything. i built the engine to run good on either itr cams or stg1's

 

LOL...when i drove from Oceanside to Frisco, the freeway was MURDER...we were driving our rented minivan and the bastard had such a large windshield the bugs were attracted to it like magnets...and it doesnt help when your fluid doesnt do ****

 

[QUOTE=DumaDA;42216573]yeah because i started it up and everything was fine, i walked back and filled up the radiator some more, came back to check on the temperature, and everything was off, if it was something i did wrong, it would have probably shown right when i first started it up, this just happened randomly[/QUOTE


So when my seatbelts and lights weren't working correctly and my dash clock went out when I replaced my tranny it was because. The 2 wires that run near the tranny and o2. Sensor wires needed completely covered up it was weird it just needed wires covered up all the way and then bam everyhing worked perfectly. It took my shop to figure it out tho.

 

yea same here thats why i wont go with anything bigger then the tuner 2 i can get pics of them later today after class i may just keep them if i knew i can reach my 190-200 whp goal im not looking to run 12 sec or anything just a decent street car is what im looking for

 

Herb, was at the Plymouth Meeting mall yesterday. Place is like a ghost town!



Hmm IMO any cam that doesn't require at least tuning isn't worth it, but that's just me. Chances are in most cases your going to be spending $300 and up on 2 hp and 3 ft lbs of tq. Maybe a bit more mid range.

I'm trying to help you help yourself. You are on one of the largest Honda knowledge bases, SEARCH, that's why it's is there. Or ask this question in the Integra forum, I'm sure you will get quality answers there (That's sarcasm, don't waste your time there).

 

LOL the Integra forum...it's a bunch of retards helping out other retards...half the time people are guessing how to fix things, so you would just be doing yourself more harm than good...once in a blue moon you will get a somewhat helpful person

 

someone from another forum said "so your tach isnt working? check your speedo cable"

 

 

that person is a fool.

 

shifter is in





duma this is what the cupholder looks like, it cleared my old short shifter

 

Leo, what cup holders are they? Tauras ones?

 

WTh Leo? i thought you were done with the da??

 

i pulled it ouf of a dodge intrepid (sp) at the junk yard, was $2 bucks

had to cut the rears a bit, and it has slider action lol



hydro
long story short, bunch of flakers and lowballers
i no longer have to pay a full mortgage (girlfriend got a real job )
so i decided to just go ahead and start a full build :D

 

***** hot bro

 

Hobos, looks good. Glad to see one of us at some sort of track!

 

anyone got a DIY on how to replace wheel studs.. i need to do my entire car.. cause i just got all my stuff in..

 

It's not terribly complicated but you will probably need to take it somewhere to get the bearing pressed out/in.

 

i need to do the same, but i also need new bearings up front. of course, i also need money to all this

 

is there a way to press the hub off the bearing, and we have a 20 ton press at school where i will be doing this, will that work, also i was looking at the exploded view of the knuckle, does the splash guard sit between the hub and the knuckle..?

 

So no more plans of an Oddy or ef? That sucks dude, after you sold all your parts too. I still haven't gotten those studs in either. lulz.

 

ehh its ok, i got a bunch of new parts that should be coming in this week

NEW = pure hotness

Ody is still gonna happen, just havent found the right one, too many beat up/overpriced ones

 

Good stuff Suren. You are really driving that car, I'll be driving with you soon hopefully.

 

Lapping 86's on behalf of DA owners.

I'm beating the crap out of it. The tires hate me lol ! My right foot is itching and I'm about to register for next month . Finish school already dood.