The Official EF Discussion Thread
Honda-Tech Member
Joined: Sep 2004
Posts: 3,568
Likes: 0
From: Anne Arundel, MD
Re: The Official EF Discussion Thread
Oh that's not my install. Just somehow 1 or two guys have yellow crx's that are doin the install.
I won't beat the **** out of it unless that's my only choice. I'll then probably find another way to do it w/out a BFH. 45* nipple, or a 90*
I'm not sure where I'll mount it yet. Probably in the fresh air vent area. The cable clutch hole will just route the stainless line I guess.
Car's in the garage but I'm too busy to work on it
Still waiting on my honda parts and my line from chase.
I won't beat the **** out of it unless that's my only choice. I'll then probably find another way to do it w/out a BFH. 45* nipple, or a 90*
I'm not sure where I'll mount it yet. Probably in the fresh air vent area. The cable clutch hole will just route the stainless line I guess.
Car's in the garage but I'm too busy to work on it
Still waiting on my honda parts and my line from chase.
Thread Starter
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Honda-Tech Member
Joined: Nov 2002
Posts: 6,725
Likes: 0
From: GA
Re: The Official EF Discussion Thread
Dang. That's a pretty good idea, but the line's already been built to be 70-75" long. It'll be pretty hard to see, but if I ever do a full engine bay smoothing & paint job I'll consider that idea.
Wait. That'd be like 200 ft long. haha
Wait. That'd be like 200 ft long. haha
Honda-Tech Member
Joined: Apr 2007
Posts: 2,380
Likes: 0
From: NY
Re: The Official EF Discussion Thread
Running it through the fender is a good idea, but where would you have it come out of? by the headlights? you would need a hose pretty long.. at least 6-8ft long.
In the shaved/Tucked thread.. theres a DC by "not so jdm dan" that ran the line through his frame rail and put a nipple right there.. very clean look for sure! just an idea... any other ideas of how to route that line im in for.
In the shaved/Tucked thread.. theres a DC by "not so jdm dan" that ran the line through his frame rail and put a nipple right there.. very clean look for sure! just an idea... any other ideas of how to route that line im in for.
Re: The Official EF Discussion Thread
i am going to drop a -3 bulkhead where hte heater valve cable comes out since i lack heat.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Honda-Tech Member
Joined: Nov 2002
Posts: 6,725
Likes: 0
From: GA
Re: The Official EF Discussion Thread
Man o man. Taking the dash out wasn't too bad. The climate control is def ko'd though. Is it worth the trouble to buy a new one?
possible mounting idea. kinda good i think. right by the clutch cable hole.
here goes nothing...
dang
the MFSOB PITA pedal assembly weld fail. DAMNGIT
looks like a new one will run me $250 or so. junk!
possible mounting idea. kinda good i think. right by the clutch cable hole.
here goes nothing...
dang
the MFSOB PITA pedal assembly weld fail. DAMNGIT
looks like a new one will run me $250 or so. junk!
Thread Starter
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: The Official EF Discussion Thread
Honda-Tech Member
Joined: Nov 2002
Posts: 6,725
Likes: 0
From: GA
Re: The Official EF Discussion Thread
I found a how-to crx to accord controls swap, but I'm leaning towards buying one new OEM. My car is too nice to do this hvac swap. It lasted 20 yrs, so another HVAC wouldn't be a horrible idea...
http://tennesseecrxgroup.com/HOWTOS/AC%20Controls.pdf
OR Ebay has a metal place FS that I'll use to put it back together.
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
http://tennesseecrxgroup.com/HOWTOS/AC%20Controls.pdf
OR Ebay has a metal place FS that I'll use to put it back together.
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: The Official EF Discussion Thread
ok i need some help with steering wheels for my hatch.
heres the three I can afford
nrg nardi ripoff
Nrg mod 07 ripoff
or real MOMO mod 07
or the black Mod 08
??????????????????? idunno
heres the three I can afford
nrg nardi ripoff
Nrg mod 07 ripoff
or real MOMO mod 07
or the black Mod 08
??????????????????? idunno
Honda-Tech Member
Joined: Nov 2005
Posts: 3,394
Likes: 0
From: My Garage
Re: The Official EF Discussion Thread
Get the real momo
I love my mugen/momo
Thread Starter
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: The Official EF Discussion Thread
That was my exact wheel. He took a pic for the site before he shipped it to me. Notice the crooked yellow stripe? I sold it before I used it so I can say much about the suede. It sure looks good, but I've heard bad things about normal use.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
