The Official EF Discussion Thread
Honda-Tech Member
Joined: May 2002
Posts: 1,285
Likes: 0
From: USA
Re: (RickyGD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
LMFAO... thats awesome
Dr. Steve Brool FTW
</TD></TR></TABLE>LMFAO... thats awesome
Dr. Steve Brool FTW
Member
Joined: Apr 2004
Posts: 1,338
Likes: 0
From: Off to britland, ca, us
Re: (Chronicsinners)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chronicsinners »</TD></TR><TR><TD CLASS="quote">
In my case this too has its drawbacks... work is really tough when you arent SUPER interested in the feild... but i go home looking forward to turn wrenches
Just to ***** it up a bit, this is where i work, onsite everyday for a mechanical HVAC contractor (steamfitting, ductwork, etc..)
</TD></TR></TABLE>
This is where I work. I have built most of the engines in this page-
http://www.hs-powersystems.com/prodindex.htm
There are a few engines that arent on there either, like our APS 5000 for the new Boeing 787. We also developed the APU for the Airbus A380. Right now I'm building APU's for the Blackhawk helicopter.
In my case this too has its drawbacks... work is really tough when you arent SUPER interested in the feild... but i go home looking forward to turn wrenches
Just to ***** it up a bit, this is where i work, onsite everyday for a mechanical HVAC contractor (steamfitting, ductwork, etc..)
</TD></TR></TABLE>
This is where I work. I have built most of the engines in this page-
http://www.hs-powersystems.com/prodindex.htm
There are a few engines that arent on there either, like our APS 5000 for the new Boeing 787. We also developed the APU for the Airbus A380. Right now I'm building APU's for the Blackhawk helicopter.
Re: (mekanism)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mekanism »</TD></TR><TR><TD CLASS="quote">
This is where I work. </TD></TR></TABLE>
When are you gonna quit working overtime and come over so we can do those brakes!?
This is where I work. </TD></TR></TABLE>
When are you gonna quit working overtime and come over so we can do those brakes!?
Member
Joined: Apr 2004
Posts: 1,338
Likes: 0
From: Off to britland, ca, us
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">
When are you gonna quit working overtime and come over so we can do those brakes!?</TD></TR></TABLE>
Haha, its hard to say no to 43.20/hour man! Especially when I have a trip to save up for!
I would like to get them done before Eibach. Maybe next weekend?
When are you gonna quit working overtime and come over so we can do those brakes!?</TD></TR></TABLE>
Haha, its hard to say no to 43.20/hour man! Especially when I have a trip to save up for!
I would like to get them done before Eibach. Maybe next weekend?
Member
Joined: Jun 2005
Posts: 2,458
Likes: 0
From: Northern, CA, usa
Re: (STDClayton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chronicsinners »</TD></TR><TR><TD CLASS="quote">
Total cost of rails: 10$ 1/4 Steel + 300$ welder + autodim mask + many hours ..... >> 175$ for bride rails
After 900 pages of casually lurking i figured i should post some pics....</TD></TR></TABLE>
i did the same thing, but i used their rails and bolted them to my stock rails without having to mod them like you did.
Total cost of rails: 10$ 1/4 Steel + 300$ welder + autodim mask + many hours ..... >> 175$ for bride rails
After 900 pages of casually lurking i figured i should post some pics....</TD></TR></TABLE>
i did the same thing, but i used their rails and bolted them to my stock rails without having to mod them like you did.
Honda-Tech Member
Joined: Mar 2005
Posts: 6,176
Likes: 0
From: san jo
Re: (CBEengineering)
hella frazzled man..installed a new dizzy on a 87 crx 1500 carb motor. and i get power from the coil and to the dizzy but i get no spark comin out of the rotor. so im guessing the new dizzy has a defective igniter?? some insight would be helpful. i need to get this car running again, advice appreciated
Re: (thenick)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick »</TD></TR><TR><TD CLASS="quote">Does your milk taste funny when you take a sip out of it? Check the expiration date dummy! For your health.</TD></TR></TABLE>
Dude.... you are stoned.
Dude.... you are stoned.
Honda-Tech Member
Joined: Jan 2002
Posts: 8,508
Likes: 2
From: everyone has their price, NJ, USA
Re: (Boosted Chemist)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
Dude.... you are stoned.
</TD></TR></TABLE>
It's Cinco de Mayo. Today is the only day people wanna be Mexican -- so they can drink all day
Dude.... you are stoned.
</TD></TR></TABLE>
It's Cinco de Mayo. Today is the only day people wanna be Mexican -- so they can drink all day
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (mekanism)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mekanism »</TD></TR><TR><TD CLASS="quote">
This is where I work. I have built most of the engines in this page-
http://www.hs-powersystems.com/prodindex.htm
There are a few engines that arent on there either, like our APS 5000 for the new Boeing 787. We also developed the APU for the Airbus A380. Right now I'm building APU's for the Blackhawk helicopter. </TD></TR></TABLE>
Is that the same Hamilton that makes propellers?
This is where I work. I have built most of the engines in this page-
http://www.hs-powersystems.com/prodindex.htm
There are a few engines that arent on there either, like our APS 5000 for the new Boeing 787. We also developed the APU for the Airbus A380. Right now I'm building APU's for the Blackhawk helicopter. </TD></TR></TABLE>
Is that the same Hamilton that makes propellers?
Member
Joined: Apr 2004
Posts: 1,338
Likes: 0
From: Off to britland, ca, us
Re:
To change the color of your car in Photoshop go to Layer-NewAdjustment Layer-Channel Mixer and select blue,green,red and mess with the settings. Since my car is blue I changed the blue channel which changes only blues. This was a quick recoloring of my car so it doesnt look like quite right. I'm sure there is a way to get a more natural look but I suck at PS so I dont know how.
There are other ways to get the same effect, like going into The NewAdjustmentLayer-Hue/Saturation.
There are like to 3 different ways to do the same thing in PS.
There are other ways to get the same effect, like going into The NewAdjustmentLayer-Hue/Saturation.
There are like to 3 different ways to do the same thing in PS.
Honda-Tech Member
Joined: Aug 2001
Posts: 5,430
Likes: 0
From: Alabama
Re: (thenick)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thenick »</TD></TR><TR><TD CLASS="quote">Does your milk taste funny when you take a sip out of it? Check the expiration date dummy! For your health.</TD></TR></TABLE>
lmao! Hey, I'm Dr. Steve Brule. Do you know what you're supposed to do when you catch on fire, stop drop and roll!! For your health.
lmao! Hey, I'm Dr. Steve Brule. Do you know what you're supposed to do when you catch on fire, stop drop and roll!! For your health.
Re: (RickyGD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote">
lmao! Hey, I'm Dr. Steve Brule. Do you know what you're supposed to do when you catch on fire, stop drop and roll!! For your health.</TD></TR></TABLE>
Who is this steve brule dude?
lmao! Hey, I'm Dr. Steve Brule. Do you know what you're supposed to do when you catch on fire, stop drop and roll!! For your health.</TD></TR></TABLE>
Who is this steve brule dude?
Re: Re: (mekanism)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mekanism »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
looks pretty close to rio red imo. not bad
</TD></TR></TABLE>
looks pretty close to rio red imo. not bad
Member
Joined: Apr 2004
Posts: 1,338
Likes: 0
From: Off to britland, ca, us
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">Is that the same Hamilton that makes propellers?</TD></TR></TABLE>
Honestly I dont know, I'm new to the company so I dont know how many divisions it has. I wouldnt doubt it though. Hamilton makes all kinds of stuff not including our parent company UTC, which owns Otis Elevator, Sikorsky Helicopter, Pratt and Whitney among others.
Honestly I dont know, I'm new to the company so I dont know how many divisions it has. I wouldnt doubt it though. Hamilton makes all kinds of stuff not including our parent company UTC, which owns Otis Elevator, Sikorsky Helicopter, Pratt and Whitney among others.
Honda-Tech Member
Joined: Aug 2001
Posts: 5,430
Likes: 0
From: Alabama
Re: (Boosted Chemist)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist »</TD></TR><TR><TD CLASS="quote">
Who is this steve brule dude?</TD></TR></TABLE>
http://www.youtube.com/watch?v=i_9vSawXNQU
Who is this steve brule dude?</TD></TR></TABLE>
http://www.youtube.com/watch?v=i_9vSawXNQU
Member
Joined: Apr 2004
Posts: 1,338
Likes: 0
From: Off to britland, ca, us
Re: (RickyGD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote">http://www.youtube.com/watch?v=i_9vSawXNQU</TD></TR></TABLE>
Retarded
Retarded
Honda-Tech Member
Joined: Aug 2001
Posts: 5,430
Likes: 0
From: Alabama
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: Re: (mekanism)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mekanism »</TD></TR><TR><TD CLASS="quote">To change the color of your car in Photoshop go to Layer-NewAdjustment Layer-Channel Mixer and select blue,green,red and mess with the settings. Since my car is blue I changed the blue channel which changes only blues. This was a quick recoloring of my car so it doesnt look like quite right. I'm sure there is a way to get a more natural look but I suck at PS so I dont know how.
There are other ways to get the same effect, like going into The NewAdjustmentLayer-Hue/Saturation.
There are like to 3 different ways to do the same thing in PS.
</TD></TR></TABLE>
make one in white for me please
There are other ways to get the same effect, like going into The NewAdjustmentLayer-Hue/Saturation.
There are like to 3 different ways to do the same thing in PS.
</TD></TR></TABLE>
make one in white for me please
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (RickyGD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RickyGD »</TD></TR><TR><TD CLASS="quote">http://www.youtube.com/watch?v=NDQMbovc2z0</TD></TR></TABLE>
hahaha
LOVE YOU STEVE!!!
hahaha
LOVE YOU STEVE!!!
