DA Integra's Only
Honda-Tech Member
Joined: Oct 2004
Posts: 1,897
Likes: 0
From: murfreesboro, tn, united states
Re: (jkeno112)
Well i haven't been on H-T for a few weeks now so i figured i'd leave a couple new pics of my DB1. And yes the front will be lowered and evened out here pretty soon. 
DSCN2601.jpg?t=1179604070
DSCN2620.jpg?t=1179604068
DSCN2625.jpg?t=1179604196
DSCN2601.jpg?t=1179604070
DSCN2620.jpg?t=1179604068
DSCN2625.jpg?t=1179604196
Honda-Tech Member
Joined: Feb 2006
Posts: 152
Likes: 1
From: Around, RI/MA, United States
Re: (gen2_4door)
^^^That is a sexy db1...the te-37's have me drooling everytime
Anyway...went for a photoshoot at lincoln woods state park in RI. Took my center caps off till I can find a real Acura centers that fit. Hoping to go 1/2" lower in the front if my parents get this house there looking at.
Needs some sideskirts...looking for a pair of wingswest rs sides or i'm going to fiberglass my own. And yes I know my exhaust needs a hanger, i keep forgetting everytime I walk into autozone
Anyway...went for a photoshoot at lincoln woods state park in RI. Took my center caps off till I can find a real Acura centers that fit. Hoping to go 1/2" lower in the front if my parents get this house there looking at.
Needs some sideskirts...looking for a pair of wingswest rs sides or i'm going to fiberglass my own. And yes I know my exhaust needs a hanger, i keep forgetting everytime I walk into autozone
Junior Member
Joined: Mar 2006
Posts: 276
Likes: 0
From: THREEoneSEVEN, IN, U.S.A.
Re: (lsintegra9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsintegra9 »</TD></TR><TR><TD CLASS="quote">thelate1: heres a link to my setup. http://www.g2ic.com/forums/vbp...&g=14
i love the setup very streetable but pulls pretty hard when im on it.. other then the colt cams the engine has stock internals. im running an rsr exhuast which is 60mm pipe with a chambered exhaust its hurting my dyno #s a bit but im still happy with how the car feel.. plus its super quiet with the rsr.
good luck with your build, im sure you will like it.. whats your setup going to be like?</TD></TR></TABLE>
what ramhorn are you running ? we seem to have a pretty close set up besides turbo size. but mines on 8 lbs and it spools at 2k so im sure it compensates lol. oh yeah i lost the gold valve cover too. thing was hideous. ill admit i thought it was cool at the time though.
i love the setup very streetable but pulls pretty hard when im on it.. other then the colt cams the engine has stock internals. im running an rsr exhuast which is 60mm pipe with a chambered exhaust its hurting my dyno #s a bit but im still happy with how the car feel.. plus its super quiet with the rsr.
good luck with your build, im sure you will like it.. whats your setup going to be like?</TD></TR></TABLE>
what ramhorn are you running ? we seem to have a pretty close set up besides turbo size. but mines on 8 lbs and it spools at 2k so im sure it compensates lol. oh yeah i lost the gold valve cover too. thing was hideous. ill admit i thought it was cool at the time though.
Honda-Tech Member
Joined: Apr 2004
Posts: 1,565
Likes: 0
From: grapes
Re: (SPOT..)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPOT.. »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
clasSICK! nice!
</TD></TR></TABLE>clasSICK! nice!
Honda-Tech Member
Joined: Jul 2004
Posts: 4,860
Likes: 0
From: Hill town, TN, USA
Re: (SPOT..)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPOT.. »</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>
Put some wheels on that thing and you
wouldnt believe the difference it would make.
clean. Just needs some new shoes
</TD></TR></TABLE>Put some wheels on that thing and you
wouldnt believe the difference it would make.
clean. Just needs some new shoes
Junior Member
Joined: Dec 2003
Posts: 214
Likes: 0
From: lacey, wa, usa
Re: (thelate1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thelate1 »</TD></TR><TR><TD CLASS="quote">
what springs, cause your drop looks so even. in g2's the front always looks a hair higher, like mine does.
i have my koni's on the lowest notch in the front, so i can't even it out any more.</TD></TR></TABLE>
I don't know exactly what springs they are, but I cut them a little while ago (3 springs each spring). Measure 3 times, eyeball it, measure once more for good measure, then cut them. They came out pretty even yeah. Just gotta find some full coilovers that have the same stance.
what springs, cause your drop looks so even. in g2's the front always looks a hair higher, like mine does.
i have my koni's on the lowest notch in the front, so i can't even it out any more.</TD></TR></TABLE>I don't know exactly what springs they are, but I cut them a little while ago (3 springs each spring). Measure 3 times, eyeball it, measure once more for good measure, then cut them. They came out pretty even yeah. Just gotta find some full coilovers that have the same stance.
Honda-Tech Member
Joined: May 2004
Posts: 6,925
Likes: 0
From: Ride and Slide Through San Jo, NOR CAL, usa
Re: (J's 94 Accord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J’s 94 Accord »</TD></TR><TR><TD CLASS="quote">sooo...
smsp or rmf....
so hard to choose from.</TD></TR></TABLE>
there both a good header u cant go wrong with eighter one but also check out dtr fabs header http://www.sixsigmaracing.com
smsp or rmf....
so hard to choose from.</TD></TR></TABLE>
there both a good header u cant go wrong with eighter one but also check out dtr fabs header http://www.sixsigmaracing.com
Honda-Tech Member
Joined: Sep 2004
Posts: 2,243
Likes: 0
From: Seattle, WA
Re: (DATZ WEAKSAUCE)
My pic request thread: https://honda-tech.com/zerothread?id=1989025
Give it some input or bump it to the top!
Give it some input or bump it to the top!
Re: (ATS*PEE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*PEE »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
Black Racings. Only come in 14s and look damn good on that da.
</TD></TR></TABLE>Black Racings. Only come in 14s and look damn good on that da.
Honda-Tech Member
Joined: Apr 2005
Posts: 1,669
Likes: 1
From: Vacaville, CA, USA
Re: (ALL MOTOR DA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALL MOTOR DA »</TD></TR><TR><TD CLASS="quote">Clean color</TD></TR></TABLE>
Thank you.....it's a 6 year old paint job...still holding up.
It's called "horizon blue metallic" and its from the stock 2000 Mercedez Benz S500......
I figured I can never afford one of those so why not get the color.
Thank you.....it's a 6 year old paint job...still holding up.
It's called "horizon blue metallic" and its from the stock 2000 Mercedez Benz S500......
I figured I can never afford one of those so why not get the color.
Re: (ALL MOTOR DA)
If anybody wants some 14" black racings painted all red, LMK. I could get some for $5-600. Just paint them back the original black w/ red lip and Black Racing logo and your good to go.
Honda-Tech Member
Joined: Apr 2005
Posts: 1,669
Likes: 1
From: Vacaville, CA, USA
Re: (integda9-92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integda9-92 »</TD></TR><TR><TD CLASS="quote">hey i just got an jdp lip also, did it come with holes to screw in or do you have to drill them on your own.. and use double sided tape for the middle ? bump bacc! </TD></TR></TABLE>
I drilled mine....and used the oem clips/bolts. start from middle and work your way outward.
</TD></TR></TABLE>I drilled mine....and used the oem clips/bolts. start from middle and work your way outward.
Honda-Tech Member
Joined: Apr 2005
Posts: 1,669
Likes: 1
From: Vacaville, CA, USA
Re: (integda9-92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integda9-92 »</TD></TR><TR><TD CLASS="quote">hey i just got an jdp lip also, did it come with holes to screw in or do you have to drill them on your own.. and use double sided tape for the middle ? bump bacc! </TD></TR></TABLE>
I drilled mine....and used the oem clips/bolts. start from the middle and work your way outward. just take your time...you have to approximate where to drill....the first couple holes...I had to re-drill because I was off the mark...then I started to come close as i started to drill more holes.
</TD></TR></TABLE>I drilled mine....and used the oem clips/bolts. start from the middle and work your way outward. just take your time...you have to approximate where to drill....the first couple holes...I had to re-drill because I was off the mark...then I started to come close as i started to drill more holes.