DA Integra's Only
i dont know if i mentioned it recently, but i was throwing a code 43 everytime i drove, i was praying it wasnt gonna be my fuel pump, went to my friend house yesterday and did fuel filter, and he repaired my fuel main relay, and apparently my o2 sensor wasnt even plugged in, so we fixed that as well, now everything seems to be running fine, no cel, no bogging or anything. Getting my a/c reinstalled on saturday
Does anyone have the Innovate LC-1 Wide band?
I am having some issues with it and need some thoughts.
Basically I never had anything to compare it's readings with although it always seemed to run fine.
Well we were having some problems on the dyno this weekend and we put an LM-1 wide band in the tail pipe which read totally different but correct.
Anyway calibrated the o2 sensor a few times, tried a new one as well and no luck. Called Innovate and they said it's too close to the turbo, which is BS because every other car has it running that close with no issues. We found another way to calibrate the sensor which I will try.
Just looking for more ideas.
I am having some issues with it and need some thoughts.
Basically I never had anything to compare it's readings with although it always seemed to run fine.
Well we were having some problems on the dyno this weekend and we put an LM-1 wide band in the tail pipe which read totally different but correct.
Anyway calibrated the o2 sensor a few times, tried a new one as well and no luck. Called Innovate and they said it's too close to the turbo, which is BS because every other car has it running that close with no issues. We found another way to calibrate the sensor which I will try.
Just looking for more ideas.
where did you have it matt? i know john kerr says to have it at least 18 inches away from i think he said the dp... **** now i forget but i know its 18 inches from something. yeah that doesnt help. damn it!
It is about 18 inches from the turbo, it's close to the firewall, which is plenty room back. The clown at Innovate told me 3 - 4 feet back. We all laughed at that. I am going to try the different calibration tonight hopefully.
Honda-Tech Member
Joined: May 2007
Posts: 3,560
Likes: 1
From: Mashing in the big chainring in LOS ANGELES, CA
Just thought I'd share a couple of 'interior' pics:

Gearknob extension; looks pretty odd, but much better than before.

Battery relocate

Exterior pic to finish with.
Cheers, springninja

Gearknob extension; looks pretty odd, but much better than before.

Battery relocate

Exterior pic to finish with.
Cheers, springninja











