Making threads for oil feed fitting
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: ......, va
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Making threads for oil feed fitting
The oil feed port on my Turbo(T3 Super 60) has no threads to screw a fitting in. I was wondering if it would be o.k. to make some threads of my own. Because of the shaving when making the threads would it be a problem. I know that Max Rev sells the flange, but that little thing cost $20 bucks +. Any suggestions?Any one selling a flange at a lower price?
#2
Re: Making threads for oil feed fitting (kenbdSi)
I woulden't make it if I were in your shoes. Unless you have done something like this before. Risking the chance of metal shavings getting in to the oil supply or even the compressor can ruin a perfectly good turbo. Spend the extra $$ and buy one.
Thread
Thread Starter
Forum
Replies
Last Post
pjr710
Forced Induction
16
08-17-2007 04:33 PM