Flywheel/Clutch: #of PP bolts?
03-04-2004, 09:21 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: Bham, WA, US
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Flywheel/Clutch: #of PP bolts?
alright im piecing together an lsvtec w/gsr tranny. bought the longblock with a freshly honed "p30 flywheel" still on the block. bought a jdm sir-II p30 flywheel/clutch combo. decided to use the flywheel that came with the motor, but noticed that this one only has 6 bolt holes for the PP to bolt on.
Looking at the JDM fly, which is rusted and needs resurfacing to be used, it has 9 bolt holes, like many of the ones i have found pictures of thru searching.
My question is simple, will it be a problem if i use only 6 of the 9 bolts on to attach the PP? thanks guys.
Looking at the JDM fly, which is rusted and needs resurfacing to be used, it has 9 bolt holes, like many of the ones i have found pictures of thru searching.
My question is simple, will it be a problem if i use only 6 of the 9 bolts on to attach the PP? thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
