jesssssss

I replaced my ISB which required me to drop and open up the tranny. I didn't technically "rebuld" it i just took the internals out replaced the bearing and put everything back together. i didnt mess with anything else. I followed a pretty good guide from Dseries.org and didn't end up with any left over parts. Is there anything at all inside the transmission that could be causing a vibration on the drivers side? I replaced that CV axle just last night. It wasn't vibrating prior to me taking apart the trans and the vibration happens when engaging the clutch going from a compete stop to about 5-10 MPH. It almost feels like something is hitting against something else. Any thoughts or opinions would be awesome and thanks in advance.

jesssssss

Bump for any thoughts