sparxx

so I am putting an LS into my 2000 LX (auto) and doing a manual swap at the same time.

I have done alot of research and this is not my first swap, but I am unsure as to what mounts/brackets I need.

I have full set of auto mounts/brackets from d16y7 that is in car now.

I have pedal cluster, clutch lines, both clutch cylinders, 97 b18b1 along with obd2a>obd2b conversion harness.

I'm just trying to figure out what I need before I start pulling motor.

thanks for all you guy's help.