<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by thevtecnician &raquo;</TD></TR><TR><TD CLASS="quote">Fluidyne made a half radiator specifically for the ef chassis

http://store.summitracing.com/...w=sku

Expensive, but it should still be cheaper than the full race rad


Modified by thevtecnician at 9:55 AM 10/10/2008</TD></TR></TABLE>


I got my fullrace for 300 shipped, pm boostfed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">I got my fullrace for 300 shipped, pm boostfed </TD></TR></TABLE>

Oh snap! Might have to get me one. Just as soon as I solve this broke problem

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">

x2 that is gonna look ill once done!</TD></TR></TABLE>
x3

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RSZero1 &raquo;</TD></TR><TR><TD CLASS="quote">Damn that is nice. Anyone know which hoses you need to use with these and a b16? B16 del sol hoses?</TD></TR></TABLE>


Type AAArrr is what I use

they always seem to [freak] up and get the wrong crap when I refer to the del b16
even when I just tried to get a Rotor and cap for my distributor


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reynardmauricio &raquo;</TD></TR><TR><TD CLASS="quote">
x3</TD></TR></TABLE>

x5 when I get some time
that pictures is like 2 months old and it still looks the same

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">

x5 when I get some time
that pictures is like 2 months old and it still looks the same</TD></TR></TABLE>


I feel your pain.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS &raquo;</TD></TR><TR><TD CLASS="quote">
x5 when I get some time
that pictures is like 2 months old and it still looks the same</TD></TR></TABLE>

I know that feeling, ive forced myself into the garage everynight, even if i only get a little bit done, its still forward progress.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Chemist &raquo;</TD></TR><TR><TD CLASS="quote">

I know that feeling, ive forced myself into the garage everynight, even if i only get a little bit done, its still forward progress.</TD></TR></TABLE>


Yeah, I kinda wish my car was at my house or work. It is hard to motivate myself to drive over to work on it all the time. Except my new house is a few blocks away from ghetto. It's more secure where it is. I should just put the motor in so I can move it, and keep it here at work. I need to start twisting some tubes.

 

diggin' the rear bumper james. lets get an overall side shot.


front lip, rear, and side skirts FTW. dont tease.

 

that rear setup is ill james. Your car has really came up as of late. Just get all your little trinkets fitted up perfect and your car will stunt!

 

i used DA or DC hoses.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">that rear setup is ill james. Your car has really came up as of late. Just get all your little trinkets fitted up perfect and your car will stunt! </TD></TR></TABLE>

lol, trinkets.


Modified by fourthgenhatchB17 at 5:54 PM 10/10/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fourthgenhatchB17 &raquo;</TD></TR><TR><TD CLASS="quote">

lol, trinkets.


Modified by fourthgenhatchB17 at 5:54 PM 10/10/2008</TD></TR></TABLE>

you like that haha

 

Anyone using a Memory Fab Bucket seat?? Trying to decide between this and the F1spec type 3 seat...

 

naw i have a corbeau cause they make fixed backs for fat people hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HOTSAUCE01 &raquo;</TD></TR><TR><TD CLASS="quote">Anyone using a Memory Fab Bucket seat?? Trying to decide between this and the F1spec type 3 seat...

</TD></TR></TABLE>


you can get a Recaro pole position for just under $500


edit: $600 looks like they raised the prices on them


Modified by vega_ROCKS at 11:13 AM 10/11/2008

 

anybody know where i can find info or a thread about what works on CRXs as far as brakes, knuckles, calipers, etc?

basically i have DA trailing arms, and knuckles on my CRX. i wanna get EX or Si parts, but i wanna keep my brake components (calipers, pads, rotors). what works with what and what do i need? im pretty sure all my DA stuff will fit on EX stuff, but i just wanna get some info on this stuff.

EDIT: https://honda-tech.com/zerothread/2140287

im sorry i even posted here before searching. i'll keep the question in case anyone wants to discuss.


Modified by g2_teg_ at 2:43 PM 10/11/2008

 

Well the DA and ex have the same calipers, pads and rotors up front. And the si doesn't have bigger brakes over a dx or base model car.

 

i forgot who asked about the fuel rail/Aromotive setup a few pages back.. a little late but i finally took a quick cell phone pic of my rail:

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HatchMo &raquo;</TD></TR><TR><TD CLASS="quote">naw i have a corbeau cause they make fixed backs for fat people hahaha</TD></TR></TABLE>
forzaII FIXED wide for me too

 

i have the FX1 wide.

 

i got the forza for 250 shipped so i couldnt turn it down

 

yeah i got mine for 330 shippes so i was happy. What did you do for sliders/rails.

 

Well the past couple days I've been disassembling the DA suspension I bought on Wednesday.

Here's before:



Here's progress:





You can see the back of my EF and my toolbox at my job in this pic



Anyone think I should get the Mugen trailing arm bushings?



Also here's the EDM headlights I bought from STREETWRKZ

 

do the EDM headlights fit on USDM front ends? Are they glass or plastic? what type of bulbs do they use?

 

resubscribing