<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89hatcher &raquo;</TD></TR><TR><TD CLASS="quote">whoring out my ssr's on my car. i should run some 195 series on it. 205's are just too wide.
</TD></TR></TABLE>

[freak]in love yer car, i gotta get me an 89

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CRXBart &raquo;</TD></TR><TR><TD CLASS="quote">After some research it appears JDM ITR is 36mm. JDM CTR, and USDM ITR are 32mm. </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reynardmauricio &raquo;</TD></TR><TR><TD CLASS="quote">
correct i'm running usdm itr hubs on my setup.</TD></TR></TABLE>

Careful, my type r B18c swap was jdm but w/ standard axles. I highly doubt someone switched them out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">

it should bolt on with no problems. are you using new gaskets or being cheap and trying to use the old ones from 1991? </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nickrps &raquo;</TD></TR><TR><TD CLASS="quote">Can you post a pic? I'm awefuly confused as flipping the booster is typically an easy job (I have no problems with mine).</TD></TR></TABLE>

heres the pics...........




i am using rtv gasket maker for it. should i be using a oem gasket?

thanks guys!!!!!!
if i cant figure it out, ill prob just flip the booster

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tealhatch &raquo;</TD></TR><TR><TD CLASS="quote">

i am using rtv gasket maker for it. should i be using a oem gasket?
</TD></TR></TABLE>

yes you should

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89hatcher &raquo;</TD></TR><TR><TD CLASS="quote">whoring out my ssr's on my car. i should run some 195 series on it. 205's are just too wide.
]</TD></TR></TABLE>

Bangvecs look awesome

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tealhatch &raquo;</TD></TR><TR><TD CLASS="quote">
if i cant figure it out, ill prob just flip the booster </TD></TR></TABLE>

You cant figure out that you need a gasket?

 

Dude this is the most crucial component of your car. Dont cheap out on it.

 

does the gasket cover that part and put pressure on it so it wont leak with it flipped????????

 

its the actual hub side that has the bigger 36mm axles not the tranny side. JDM itr hubs have the 36mm and the ctr/usdm itr have 32mm axle hubs and tranny side should all be the same for b series.

 

who was it that had a hook up @ a Honda parts store?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91’ LS-VTEC &raquo;</TD></TR><TR><TD CLASS="quote">who was it that had a hook up @ a Honda parts store?
</TD></TR></TABLE>I know STREETWERKZ works at a Honda, whether or not he has the hookup is another story.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91’ LS-VTEC &raquo;</TD></TR><TR><TD CLASS="quote">who was it that had a hook up @ a Honda parts store?
</TD></TR></TABLE>

Either Joe (streetwerkz) or hondapartsdeals.com.

 

got a little something for the crx yesterday...got a huge pile of other stuff in my living room waiting for it too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UltimX &raquo;</TD></TR><TR><TD CLASS="quote">its the actual hub side that has the bigger 36mm axles not the tranny side. JDM itr hubs have the 36mm and the ctr/usdm itr have 32mm axle hubs and tranny side should all be the same for b series.</TD></TR></TABLE>

Correct, i was referring to the HUB side. B series trans side wasnt the issue here.

So anyone know why my 97 spec jdm itr swap has 32mm axles? Very strange according to everyone's info (which may or may not be correct) but i recall the earlier itr swaps NOT having the 36's. Something tells me it had to do w/ the 4 lug itr's...

 

i just called honda, and they said they dident have a gasket for that on record.....wtf.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stefndogg &raquo;</TD></TR><TR><TD CLASS="quote">got a little something for the crx yesterday...got a huge pile of other stuff in my living room waiting for it too
</TD></TR></TABLE>

Red? You ricer. How about this...I'll teach you how to drive if you teach me how to use my new DSLR that I'll be getting next month.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tealhatch &raquo;</TD></TR><TR><TD CLASS="quote">

heres the pics...........




i am using rtv gasket maker for it. should i be using a oem gasket?

thanks guys!!!!!!
if i cant figure it out, ill prob just flip the booster </TD></TR></TABLE>


OEM DUDE. come on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nickrps &raquo;</TD></TR><TR><TD CLASS="quote">

Either Joe (streetwerkz) or hondapartsdeals.com.</TD></TR></TABLE>


dont go through me. i dont do internet sales anymore.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tealhatch &raquo;</TD></TR><TR><TD CLASS="quote">i just called honda, and they said they dident have a gasket for that on record.....wtf.</TD></TR></TABLE>


your parts guy is an idiot. trust me, there are gaskets. i bought 2 different gaskets when i flipped my booster. one is shaped like a circle, and the other is like a square/oval with rounded edges.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">


one is shaped like a circle, and the other is like a square/oval with rounded edges. </TD></TR></TABLE>





number 9 in the first picture and number 3 in the second picture.

 

^^^ Now thats service!!

--- really though tealhatch, rtv gasket maker? (insert picture of man shaking his head)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nickrps &raquo;</TD></TR><TR><TD CLASS="quote">

Red? You ricer. How about this...I'll teach you how to drive if you teach me how to use my new DSLR that I'll be getting next month.

</TD></TR></TABLE>
what makes you think i cant drive (not to mention i kinda live with a driving instructor lol) how about i teach you how to use the digital slr and you can give me a tow sometime when my pos breaks

edit: and yea red wouldnt be my 1st choice but it was mad cheap and it actually looks ok in a white car


Modified by Stefndogg at 4:38 PM 11/5/2008

 

yay got my harness today

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stefndogg &raquo;</TD></TR><TR><TD CLASS="quote">yay got my harness today </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stefndogg &raquo;</TD></TR><TR><TD CLASS="quote">
what makes you think i cant drive (not to mention i kinda live with a driving instructor lol) how about i teach you how to use the digital slr and you can give me a tow sometime when my pos breaks

edit: and yea red wouldnt be my 1st choice but it was mad cheap and it actually looks ok in a white car
</TD></TR></TABLE>

Because "I've seen the way you drive. You got a heavy foot. That much nitrous and you'll blow yourself to pieces."

Anyways, red is dope...I'm just giving you sh*t. I'd rather have red, but I have a gay baby blue car I want a purple Crow harness now

 

Lo Pan ftw ^