The Official EF Discussion Thread
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (B16CRXT)
did you read my edited post a page back
just take them apart and compare shafts if the shafts are the same you dont even have to press the bearing off the shaft....if they arent but the bearings are the same just tap it off and switch them....its pretty easy but be sure that you have some PB blaster and a good set of screw drivers (if not an impact driver)
just take them apart and compare shafts if the shafts are the same you dont even have to press the bearing off the shaft....if they arent but the bearings are the same just tap it off and switch them....its pretty easy but be sure that you have some PB blaster and a good set of screw drivers (if not an impact driver)
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">yeah i think i found it off tysons faq page</TD></TR></TABLE>
anything you need to know about a EF, *****-bitches
anything you need to know about a EF, *****-bitches
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">used momo? 
used nardi wood rim?
new nrg w/ red stitch to match seats?? </TD></TR></TABLE>
rare woodgrain Mugen
used nardi wood rim?
new nrg w/ red stitch to match seats??
</TD></TR></TABLE>rare woodgrain Mugen
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (vega_box)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box »</TD></TR><TR><TD CLASS="quote">
rare woodgrain Mugen </TD></TR></TABLE>
put it off on some crome cf-48s
rare woodgrain Mugen
</TD></TR></TABLE>put it off on some crome cf-48s
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">
put it off on some crome cf-48s </TD></TR></TABLE>
yes zi'r
be some ballin *** **** right there
$200 aint bad for such a rare goodie either
put it off on some crome cf-48s </TD></TR></TABLE>
yes zi'r
be some ballin *** **** right there
$200 aint bad for such a rare goodie either
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (CBEengineering)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">used momo?
used nardi wood rim?
new nrg w/ red stitch to match seats?? </TD></TR></TABLE>
I'm saying no for the NRG.
used nardi wood rim?
new nrg w/ red stitch to match seats??
</TD></TR></TABLE>I'm saying no for the NRG.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (-NA-aLL-thE-wAy-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -NA-aLL-thE-wAy- »</TD></TR><TR><TD CLASS="quote">
I'm saying no for the NRG. </TD></TR></TABLE>
care to say why??
jus wondering
if its cause its a knock off.....dont even try my whole car is a knock off......
konig wheels, nrg seats, tiwanese coilovers lol
I'm saying no for the NRG. </TD></TR></TABLE>
care to say why??
jus wondering
if its cause its a knock off.....dont even try my whole car is a knock off......
konig wheels, nrg seats, tiwanese coilovers lol
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering »</TD></TR><TR><TD CLASS="quote">used momo?
used nardi wood rim?
new nrg w/ red stitch to match seats?? </TD></TR></TABLE>
used nardi wood rim?
new nrg w/ red stitch to match seats??
</TD></TR></TABLE>
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">IMO, woodgrain wheels have no place in an EF.
They aren't that "old school."</TD></TR></TABLE>
i wouldnt have a problem with a deep dished wood outer with a aluminum center but those ugly ******* wooden monte carlos should be used as kindling.
edit: i mean that one that james day just posted
They aren't that "old school."</TD></TR></TABLE>
i wouldnt have a problem with a deep dished wood outer with a aluminum center but those ugly ******* wooden monte carlos should be used as kindling.
edit: i mean that one that james day just posted
Re: (vega_box)
Vega, I still can't help but think of that "S.S. Minnow" comment every time i see that wheel of yours.
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6
Re: (xDicktonesx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xDicktonesx »</TD></TR><TR><TD CLASS="quote">
i wouldnt have a problem with a deep dished wood outer with a aluminum center but those ugly ******* wooden monte carlos should be used as kindling.
edit: i mean that one that james day just posted</TD></TR></TABLE>
The problem I have with the "deep dish" wheels is that in our cars, adapter hubs and quick releases push the wheel close enough as it is. With these deep dish wheels, you can practically drive with your nipples.
i wouldnt have a problem with a deep dished wood outer with a aluminum center but those ugly ******* wooden monte carlos should be used as kindling.
edit: i mean that one that james day just posted</TD></TR></TABLE>
The problem I have with the "deep dish" wheels is that in our cars, adapter hubs and quick releases push the wheel close enough as it is. With these deep dish wheels, you can practically drive with your nipples.
Honda-Tech Member
Joined: Mar 2006
Posts: 3,730
Likes: 0
From: Atl, GA
Re: (xDicktonesx)
yeah sorry i dont care how rare that is um thats .........
heres the nardi
http://cgi.ebay.com/ebaymotors...QrdZ1
heres the nardi
http://cgi.ebay.com/ebaymotors...QrdZ1
Honda-Tech Member
Joined: Aug 2003
Posts: 19,768
Likes: 0
From: gold rust on my mugen rims
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">Vega, I still can't help but think of that "S.S. Minnow" comment every time i see that wheel of yours.
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6</TD></TR></TABLE>
not as heavy but rides just as slow
oohh my Speed-O don't work either...
I just listen to the motor to know when to shift
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6
</TD></TR></TABLE>not as heavy but rides just as slow
oohh my Speed-O don't work either...
I just listen to the motor to know when to shift
B*a*n*n*e*d
Joined: May 2005
Posts: 6,291
Likes: 0
From: Hessian Aggression
Re: (Mr_CRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX »</TD></TR><TR><TD CLASS="quote">Vega, I still can't help but think of that "S.S. Minnow" comment every time i see that wheel of yours.
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6</TD></TR></TABLE>
shame on me for not seeing that half assed tachless wonder.
wire that bad dog for an electronic VSS to make the bay that much cleaner.
Sell that piece and buy a cluster with a tach, so you know when to shift your super racer z6
</TD></TR></TABLE>shame on me for not seeing that half assed tachless wonder.
wire that bad dog for an electronic VSS to make the bay that much cleaner.