uughhH!! not again....... time to clean up

 

think about that one joe, that's a picture of a usdm front end

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16_madman &raquo;</TD></TR><TR><TD CLASS="quote">think about that one joe, that's a picture of a usdm front end</TD></TR></TABLE>

bahwhwhaha


sorry but he got you on that one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR_JDM95 &raquo;</TD></TR><TR><TD CLASS="quote">thanks guys, and does that fit on a usdm CRX front end? </TD></TR></TABLE>

There is a little gap where the lip sticks out a tiny bit from the bumper right between the big center opening and the fog light holes. This is cause the EF8 front end (which the lip was designed for) is a bit rounder than the ED front end. The way I instaleld it helped minimize that gap, though. I added some mounting brackets on the center of the lip to help pull it in.

 

by the way it probably takes trimming for both the 8889 and the 9091 front ends, but 8889 needs more i bet

 

I actually didn't trim anything for installing it on my 90-91 bumper.

88-89 would definitely take some modification, though.

 

off topic but is that a rat or a Buffalo on your avatar

 

i saw a car yesterday with a rear window banner that said "I KISS RATS" she had rat stickers all over the ******* car.

PS. i also picked up my Ls swap!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_box &raquo;</TD></TR><TR><TD CLASS="quote">off topic but is that a rat or a Buffalo on your avatar</TD></TR></TABLE>

It's a prancing buffalo; The Tatonka "Ferrari" logo.

 

ive never seen a dancing bull

 

exactly.

 

I've seen dances with wolves

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr_CRX &raquo;</TD></TR><TR><TD CLASS="quote">a prancing buffallo</TD></TR></TABLE>

that just don't seem rite.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR_JDM95 &raquo;</TD></TR><TR><TD CLASS="quote">thanks guys, and does that fit on a usdm CRX front end? </TD></TR></TABLE>

I got it on no mods

 

what Ksports have been out for several years now? The guys at JLB say they havent had any complaints... I dont think you can go wrong...pm me man...

 

picture from the summer

 

I'm thinking of making my own lower rear tie bar. Woud it be better to use:

1. 1/2" x 1" solid alum. bar
2. 1/2" x 1" hollow alum. rectangular stock
3. Solid or hollow round alum. stock
4. Steel

I want to make a solid tie bar, with non adjustable ends.
Thoughts?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicandy &raquo;</TD></TR><TR><TD CLASS="quote">I'm thinking of making my own lower rear tie bar. Woud it be better to use:

1. 1/2" x 1" solid alum. bar
2. 1/2" x 1" hollow alum. rectangular stock
3. Solid or hollow round alum. stock
4. Steel

I want to make a solid tie bar, with non adjustable ends.
Thoughts?</TD></TR></TABLE>


Hollow tube is stronger then solid, and lighter too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CBEengineering &raquo;</TD></TR><TR><TD CLASS="quote">i am the same way

How long u had the Omnis Kurt, like 3 years?

we both had the sports, mine on a DC his on a EG, my dad has the streets on his EG and we all loved them, BTW I was going to ge tthem for my EF but everywhere I looked were out of stock for like months so I ended up getting the OTS F2s I hope they are stiff enough for me (i like stiff springs)
might have to order some higher rate springs</TD></TR></TABLE>


I have had my omnis since 03 and i still love the **** out of them I will probly all ways stick with omnis

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOHC_C-REX &raquo;</TD></TR><TR><TD CLASS="quote">what Ksports have been out for several years now? The guys at JLB say they havent had any complaints... I dont think you can go wrong...pm me man...</TD></TR></TABLE>

DRFlickner

 

ya i'd probably do omni's i think i can handle them.. but i think im goin to stick with koni's and H&R

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STDClayton &raquo;</TD></TR><TR><TD CLASS="quote">

DRFlickner </TD></TR></TABLE>


VERY MUCH SO!


on to a diff topic...


what brake pads are you guys running? I am currently using Axxis metal pads and dont have to much complaints...but the dust was absolutly horrible...I know dust is a bi-product of a perf pad but comeon...the endless ones I had before did better then that...anyways what are you guys running...and how do you like them

 

good topic

last ones i used on my 01 civic i had HAWK HP + im goin to most likly get these for my EF man those things stopped on a dime.


Modified by SiR_Injected at 8:43 PM 2/11/2007

 

does anyone know who's hatch this is? i was looking for him, but couldnt find him. i saw him on the freeway ridin with a red EK, but he took off.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR_Injected &raquo;</TD></TR><TR><TD CLASS="quote">good topic

last ones i used on my 01 civic i had HAWK HP + im goin to most likly get these for my EF man those things stopped on a dime.


Modified by SiR_Injected at 8:10 PM 2/11/2007</TD></TR></TABLE>

yeah HAWKs are on my list to check out....im considering

Endless (again)
HAWK
EBCs green stuff (mostly because they tend to do alright on the dust side)