<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jose-aka-Pedro &raquo;</TD></TR><TR><TD CLASS="quote">Finally done with my swap! Check my sig, Myspace, I have a few pics and a slideshow of the swap,

http://www.myspace.com/joseda9

And check out my project thread too!

https://honda-tech.com/zerothread?id=1575118&page=4</TD></TR></TABLE>

good ****.. i remember my junior year bringing my car home blowing smoke everywhere cause of blown rings ahah my parents were hella mad saying i bought a pos for a car brings back memories to my swapping days too and the cars going back in the surgery room again soon

 

lol my parents ben sayin that the whole time, yeah I brought mineback I blew the rings in cyl #3,

I cant wait to get it goin tho,

My parents gave me a full body work and custom paint for easter gift tho, lol
Havnt chosen what whote to go with,

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jose-aka-Pedro &raquo;</TD></TR><TR><TD CLASS="quote">
My parents gave me a full body work and custom paint for easter gift tho, lol
Havnt chosen what whote to go with,
</TD></TR></TABLE>

Seems a little overdone for Easter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Jay &raquo;</TD></TR><TR><TD CLASS="quote">Seems a little overdone for Easter. </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DATZ WEAKSAUCE &raquo;</TD></TR><TR><TD CLASS="quote">

good ****.. i remember my junior year bringing my car home blowing smoke everywhere cause of blown rings ahah my parents were hella mad saying i bought a pos for a car brings back memories to my swapping days too and the cars going back in the surgery room again soon </TD></TR></TABLE>

hey be nice there that POS was my old car hahaa

 

Jose you goofball

 

Oh yea anyone got a spare exhaust manifold bolt I am missing one

 

hey yall, im lookin for more of a drop. I have some fairly new tockico blues. I was thinking of some h&r race springs. should i invest on some better struts?

i was lookin at this combo. https://honda-tech.com/zerothread?id=1562016

what should i do.
my budget is $200....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D 2da A9 &raquo;</TD></TR><TR><TD CLASS="quote">hey yall, im lookin for more of a drop. I have some fairly new tockico blues. I was thinking of some h&r race springs. should i invest on some better struts?

i was lookin at this combo. https://honda-tech.com/zerothread?id=1562016

what should i do.
my budget is $200....</TD></TR></TABLE>

Tokico Blues and Race springs will give you more of a drop and a rough *** ride.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deano_D &raquo;</TD></TR><TR><TD CLASS="quote">Tokico Blues and Race springs will give you more of a drop and a rough *** ride.</TD></TR></TABLE>

what springs would you suggest? im looking for a 2-2.25in drop.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D 2da A9 &raquo;</TD></TR><TR><TD CLASS="quote">

what springs would you suggest? im looking for a 2-2.25in drop.</TD></TR></TABLE>

Those Race springs will give you a good drop, I would atleast some Tokico Illuminas for those higher rates that the race springs have though.

I took a new pic today and I need to find a better server mine is killing my quailty. This is my daily height I have to manage speed bumps at school.

 

is that a 2in drop?
this is what i have now..
http://cgi.ebay.com/ebaymotors...QrdZ1
i think.. i bought the car with them on

edit.. no i just looked i have ebach(sp) sportlines. so im guessing 1.3 drop.
here are some pics, i basicly want to eliminate some wheel gap. and have a slight stiffer ride.






Modified by D 2da A9 at 11:00 PM 4/24/2006

 

that white one is the sex

 

I need a little help from one of you guys with a engine swap,and a wire tuck.i was wondering if you guys remove or just hide the map sensor on the back of the firewall.it's the one that sits next to the emission valves.i know you will have to have the map sensor so this is where it starts to puzzle me.but iv'e seen some engine management systems where you remove it and use theres.any help is greatful thanks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ghg78 &raquo;</TD></TR><TR><TD CLASS="quote">I need a little help from one of you guys with a engine swap,and a wire tuck.i was wondering if you guys remove or just hide the map sensor on the back of the firewall.it's the one that sits next to the emission valves.i know you will have to have the map sensor so this is where it starts to puzzle me.but iv'e seen some engine management systems where you remove it and use theres.any help is greatful thanks.</TD></TR></TABLE>

you can move the map sensor down the firewall out of view. or do what im doing and swap in a 94+ intake manifold and throttle body. the 94+ map sensor is on the throttle body.

 

cool,i think i'm going with the updated one then,thanks alot.

 

Just got my 16 inch rota gt3. Wha tire size should i go with? I dont want no tire that looks to beefy. I want a tire size that will set the car off and look good as ****

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetaccord &raquo;</TD></TR><TR><TD CLASS="quote">Just got my 16 inch rota gt3. Wha tire size should i go with? I dont want no tire that looks to beefy. I want a tire size that will set the car off and look good as **** </TD></TR></TABLE>
205/45/16

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D 2da A9 &raquo;</TD></TR><TR><TD CLASS="quote">
205/45/16</TD></TR></TABLE>

Do anybody has pic of these size tires on their da??

 

I be using itr cams for my turbo setup. I heard diffrent people telling me that i should use itr vavletrain with these cams.And other poeple saying it be fine to use stock valvetrain on itrs. So what should i do ??? I be using it on a b16 head right now everything is stock except for the p&p work done to it. So please help me out ?????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetaccord &raquo;</TD></TR><TR><TD CLASS="quote">

Do anybody has pic of these size tires on their da??</TD></TR></TABLE>

 

just thought i would share an update...

 

Modified by 1jdmda9 at 8:03 PM 4/25/2006

 

nice