<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by antone &raquo;</TD></TR><TR><TD CLASS="quote">THAT HEADER IS A PROFAB/ REDZONE PERFORMANCE HEADER.
THE SAMCO HOE KIT IS FOR 90-93 INTEGRAS.
I HAVE A RED SET FOT FOR SALE 80 SHIPPED. BRAND NEW IN BAG (UNOPENED).

BTW ITS MY CAR.</TD></TR></TABLE>

where can i look to maybe purchase one

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 608 Gangsta &raquo;</TD></TR><TR><TD CLASS="quote">what header is this</TD></TR></TABLE>


that is the cleanest engine bay ive ever seen

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSR4U2NV &raquo;</TD></TR><TR><TD CLASS="quote">has anyone here renewed their JDM 1 piece headlights? what do i have to do to take out the yellowing?? any tips would be great!</TD></TR></TABLE>

i used some plastic polish on my a buddys headloghts i think by meguiars or mothers.. but it worked awesome! looked new!

 

**** mike no longer owns the car? wth

 

Adjusted my valves and took a couple of pics which did not turn out the best.




Well school gets out in a few weeks so I can start working again to get this DA on its feet.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Bob Dobalina &raquo;</TD></TR><TR><TD CLASS="quote">

If your car handles poorly on Skunk2 sleeve coilovers, changing to Ground Controls isn't going to make any difference. Unless you switch to better suited spring rates with the Ground Controls, you are just putting a different brand of sleeve spring on your car. You can choose spring rates from Skunk2 just like you can with Eibach/Ground Control. They are pretty much the same. I chose my preferred rates and got my coilover springs from Skunk2.

Shocks, tires, and sway bars are ultimately going to determine how your car handles.</TD></TR></TABLE>

The skunk2s are old as crap and 2 are bent, and I have no idea what rate they are since they came on the car and most all markings are wore off of them. I will keep my sleeves and just get the springs. Not sure on what rates though I will read more into it when I have the dimeage.

 

just the polish got the yellowing out? you didnt have to wet sand or anything?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSR4U2NV &raquo;</TD></TR><TR><TD CLASS="quote">just the polish got the yellowing out? you didnt have to wet sand or anything?</TD></TR></TABLE>

go to http://www.g2ic.com

then click Teg Tips... look under lighting and there should be a guide on renewing one piece headlights.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DAts P &raquo;</TD></TR><TR><TD CLASS="quote">damn Jones shoulda kept that shiiiit!!! </TD></TR></TABLE>

...i second that!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 608 Gangsta &raquo;</TD></TR><TR><TD CLASS="quote">where can i look to maybe purchase one</TD></TR></TABLE>

http://www.swapshopracing.com or you can call up camp1320 or spoolin performance

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DATZ WEAKSAUCE &raquo;</TD></TR><TR><TD CLASS="quote">

http://www.swapshopracing.com or you can call up camp1320 or spoolin performance </TD></TR></TABLE>

awesome! thanx you or anyone know if you have to notch the front cross member to make it fit ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*FRED &raquo;</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>

nice car, what kind of rims are on that 96 hb behind yours???

 

OH NEVER MIND! i adjusted the brightness and saw Super Advans...

 

 

^^ REAL mugen sides

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BACKintheDA &raquo;</TD></TR><TR><TD CLASS="quote">^^ REAL mugen sides </TD></TR></TABLE>

ah, yes... the side skirts... well, here's the deal.

I bought them right after I got the car. I was told they were real bought way back in yada yada... so I painted them and put them on, figuring that the door scrape was due to the fact that the door had been repaired/replaced. Come to find out (after the car was totalled and long gone), they were replicas made in japan in the 90s. This somewhat makes sense, as they were still very good quality (I am a hawk for fake parts' quality, but didn't realize or know). In order to not mislead, they were replica Mugen sides all along, and I just didn't know/realize it till after the car was already gone (and these and all pics of it were already taken).

 

 

FULL RACE TRACTION BAR.
IM ME WITH OTHER ? 'S IF YOU HAVE ANYMORE.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmintegraxsi &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
NICE

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by adiDAs &raquo;</TD></TR><TR><TD CLASS="quote">anyone think i should get a front aftermarket lip?</TD></TR></TABLE>

you should get the 1 piece headlights

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS*FRED &raquo;</TD></TR><TR><TD CLASS="quote">thanx for posting the info on YOUR car
i was about to do it rihgt now
hahahaha


Here is another DA from the ATS-G camp that was owned by our boy Mike.
"ATS*JONES" is his name on H-T
But it's no longer with us cause she was sold about 2 months ago
So im gunna hve to ***** her out
Covered with a **** load of JDM goodies........












Actual rear JDM DA trunk lid with bronze glass and "INTEGRA" 3rd brake light (not pictured though )


Gathers


DAMN i wish i had more pix of all the goods this DA had
i gotta go dig more up..........

</TD></TR></TABLE>mike sold his da omg why

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DATZ WEAKSAUCE &raquo;</TD></TR><TR><TD CLASS="quote">http://www.swapshopracing.com or you can call up camp1320 or spoolin performance </TD></TR></TABLE>

will this clear the stock front cross member ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 608 Gangsta &raquo;</TD></TR><TR><TD CLASS="quote">will this clear the stock front cross member ?</TD></TR></TABLE>

no your gonna have to notch the stock crossmember or get an aftermarket one

 

what is that sideskirt from ?

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Linus_E &raquo;</TD></TR><TR><TD CLASS="quote">what is that sideskirt from ? </TD></TR></TABLE>

looks like dc integra

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DATZ WEAKSAUCE &raquo;</TD></TR><TR><TD CLASS="quote">

no your gonna have to notch the stock crossmember or get an aftermarket one</TD></TR></TABLE>

aight thanx