#288 Bumping this biatch,

I was workong on the DA lastnight, when the front two jack stand just tiped over and dropped the whole front of the car down

The rear had wheels, I just finished installing the tokcio's, and coilvers when I was lowering the rear of the car and the front fell over

Reaplacing another axle and installing the front tokico's and coilovers and leaving to get an aligment and I'll be back with pics!

Bump!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4NLINE UNLIMITED &raquo;</TD></TR><TR><TD CLASS="quote">Pics of Tracton Bars Please I want get a 4-1 Header Sucka and dont want to notch the Crossmember
Pleace Chris A Town</TD></TR></TABLE>

Full-Race



In these pictures, that's a DC 4-2-1 but I now have a 4-1 header and it hangs down a little past the crossmember bar, but it's not really a hazard since my car isn't slammed

 

Any improvements from Launching?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90DA9IntegraRS &raquo;</TD></TR><TR><TD CLASS="quote">#288 Bumping this biatch,

I was workong on the DA lastnight, when the front two jack stand just tiped over and dropped the whole front of the car down

The rear had wheels, I just finished installing the tokcio's, and coilvers when I was lowering the rear of the car and the front fell over

Reaplacing another axle and installing the front tokico's and coilovers and leaving to get an aligment and I'll be back with pics!

Bump!</TD></TR></TABLE>

**** man, that's bad news..you alright?

 

Yah I'm fine, I was beside the car lowering it when it fell.
ont worry, but thanks.

Anyway, Nice DA, its sick,

Just got my susp on going to the gas station, I'll snap some pics of it (at highest, and lowest)

 

check my sig for more pics:

 

damn chase only if u were local id like to look at the full race traction bar

 

heres mine









tell me what ya think

 

Uploading pics of my DA dumped, I tucked atleast 2-3" in the rear,
Didnt have a lowprofile jack so i couldnt do the front

 

Use a couple 2x4s and drive your car on them. Or you could use ramps (but of course, pieces of board are cheaper).

 

Finally! I installed my Tokcios and coilovers, yes, Tenzo R,

They are bouncy as hell, so I'm saving for a GC/KY setup alrady.

Anyway, Here they are, sry its ight and I couldnt slam the front becuase of no lowprofile jack, sucks I could only get it about halfway in the front, just enuf for no finger gap,

In the rear I could slam it!, I used the tow hook as a jack point,

Here are the pics, the rear tires are tucked 3"
Exhuast 1" from ground, I'll get better pics durring the day.

Am I slamned, In the rear?

Pics





front not slamned, I know. need a rap that is only half way down the coilover,


Brand new tires, less than 4 miles on them


Got camber?


Better pics with the front slamened durring the day,

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90DA9IntegraRS &raquo;</TD></TR><TR><TD CLASS="quote">Finally! I installed my Tokcios and coilovers, yes, Tenzo R,

They are bouncy as hell, so I'm saving for a GC/KY setup alrady.

Anyway, Here they are, sry its ight and I couldnt slam the front becuase of no lowprofile jack, sucks I could only get it about halfway in the front, just enuf for no finger gap,

In the rear I could slam it!, I used the tow hook as a jack point,

Here are the pics, the rear tires are tucked 3"
Exhuast 1" from ground, I'll get better pics durring the day.

Am I slamned, In the rear?
</TD></TR></TABLE>
HAHAHA looks like my RS Rolling Shell when i had it .... But it didnt have any shocks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90DA9IntegraRS &raquo;</TD></TR><TR><TD CLASS="quote">Finally! I installed my Tokcios and coilovers, yes, Tenzo R,

They are bouncy as hell, so I'm saving for a GC/KY setup alrady.
</TD></TR></TABLE>

Too low for my likings, especially since daily-driver..but I am saving for GC/KY, too! We should have a race or something, muahaha!

Right now I don't have any cash down for it though...you?

 

Oh yah WAY TOO LOW, I just wanted to see how low it could go

I have it set for daily driving, right at the "No gap" line in the rear,
and its tucking maybe 1" in the front, gives it a nice looks, Like its about to pounce on its prey

I'll get pics tomm.

edit here is a pic from tonight, Loks beter, but cant tell with it being darkoutside.

I love taking pics here, someone called the cops on me tho, While was leveling the coilovers on the car cops rolled around the corner, they had no problem after I explained to them what I was doing. They were like "Awww coool, Well good luck"

 

Yah, they are pretty cool about **** sometimes.

Peopl are just nosy and trying to get teens in trouble...pff, like we don't enough!

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4NLINE UNLIMITED &raquo;</TD></TR><TR><TD CLASS="quote">Any improvements from Launching?</TD></TR></TABLE>

Yes, the whole feel of the car changes with traction bars, at least the Full-Race. You can see in the first picture the front motor mount is attached to the cross-member which makes the front end stiff as crap and the engine doesn't move one bit. I have motor mount inserts to help the engine stay stiff too! But I recommend them to anyone who likes a solid feeling car or likes to drag race.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DATZ WEAKSAUCE &raquo;</TD></TR><TR><TD CLASS="quote">damn chase only if u were local id like to look at the full race traction bar </TD></TR></TABLE>

Yeah I like to show 'em off I have more pictures

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 &raquo;</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
I Likey.... I wanted to do the Lime Green or Some type of Blue

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4NLINE UNLIMITED &raquo;</TD></TR><TR><TD CLASS="quote">Any improvements from Launching?</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChaseIntegra &raquo;</TD></TR><TR><TD CLASS="quote">

Yes, the whole feel of the car changes with traction bars, at least the Full-Race. You can see in the first picture the front motor mount is attached to the cross-member which makes the front end stiff as crap and the engine doesn't move one bit. I have motor mount inserts to help the engine stay stiff too! But I recommend them to anyone who likes a solid feeling car or likes to drag race.</TD></TR></TABLE>
Yea.... I just want to get it so i can install a 4-1 Header... But the more the Better

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

Alright..how the expletive are your rpm's so low at 110?...I am at 4 while going 75, lol. But maybe that's because i have a short *** transmission.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Jay &raquo;</TD></TR><TR><TD CLASS="quote">

Alright..how the expletive are your rpm's so low at 110?...I am at 4 while going 75, lol. But maybe that's because i have a short *** transmission.</TD></TR></TABLE>
You Didnt see that it was in KM HAHAHA

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Jay &raquo;</TD></TR><TR><TD CLASS="quote">Alright..how the expletive are your rpm's so low at 110?...I am at 4 while going 75, lol. But maybe that's because i have a short *** transmission.</TD></TR></TABLE>

My transmission is as short as you can get stock... I'm only going 70.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGeDA9 &raquo;</TD></TR><TR><TD CLASS="quote">

My transmission is as short as you can get stock... I'm only going 70.</TD></TR></TABLE>

Is it a s1 on a b18a?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4NLINE UNLIMITED &raquo;</TD></TR><TR><TD CLASS="quote">
You Didnt see that it was in KM HAHAHA</TD></TR></TABLE>

Nope, I sure didn't. Don't insult my intelegence ******. ***.

Just ******'.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Deano_D &raquo;</TD></TR><TR><TD CLASS="quote">

Is it a s1 on a b18a?</TD></TR></TABLE>

B17 /w YS1, whaaatt?! Lol. For me, I mean.

 

Bump, It's km/H not MPH, lol

I got new pics of my DA at the Gas Station, I was using the wrong camera

here they are there ok. Still sucks


BTW, A Before pic

[IMG][/IMG]

And After,






Got camber? I hope the fix this when I get the alignment tomm/
Other side doesnt got this much camber









Later guys,