Wastegate porting on the 18G...need some links.
#1
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Southeast, mi, untied states
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Wastegate porting on the 18G...need some links.
I want to port out the wastegate and put the TRE 34mm flapper in to minimize the spiking when I go to the 3" exaust...anybody know any good links with some pictures to show what I'm going to be doing?
#3
Honda-Tech Member
Join Date: Jun 2002
Location: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Posts: 7,942
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wastegate porting on the 18G...need some links. (Chillinit)
double
This is a good thread for those with greddy kits looking to up the boost without worrying about creeps/spikes. You NEED to port the WG properly proportionally to the larger exhaust you're running.
This is a good thread for those with greddy kits looking to up the boost without worrying about creeps/spikes. You NEED to port the WG properly proportionally to the larger exhaust you're running.
Thread
Thread Starter
Forum
Replies
Last Post
BluLuder
Forced Induction
5
09-13-2001 04:38 AM