Is a sc61 48 trim .63 a/r good for a stock Ls
10-19-2004, 02:03 PM
#1
Thread Starter
Join Date: May 2004
Location: orlando, fl, us
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Is a sc61 48 trim .63 a/r good for a stock Ls
My buddy is trying to buy a new turbo, is this a good turbo for a stock ls? he had a t3/t4 garrett already (dont kow the specs on it) and it was a real nice mid to top end turbo and he's looking for similar mid and more top end . He is going to be running 10 psi
10-19-2004, 02:07 PM
#2
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is a sc61 48 trim .63 a/r good for a stock Ls (Cb7Tuner)
err 48 trim? that's not right...
the base SC61 has a .60 a/r T04E compressor with a 56 trim 61mm Garret GT wheel. The smallest turbine side is a .63 a/r T3 with a T350 (stage V turbine wheel)
the base SC61 has a .60 a/r T04E compressor with a 56 trim 61mm Garret GT wheel. The smallest turbine side is a .63 a/r T3 with a T350 (stage V turbine wheel)
10-19-2004, 02:24 PM
#4
Thread Starter
Join Date: May 2004
Location: orlando, fl, us
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is a sc61 48 trim .63 a/r good for a stock Ls (CivicRyda2k)
thats what i thought , but my friend said the shop he goes to told him it was a 48 trim and .63 ar so i dont know, but would the specs u give run good on a stock ls? he has 2.5 inch piping and a 2.5 inch downpipe. when might he see full boost?
10-19-2004, 02:43 PM
#5
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is a sc61 48 trim .63 a/r good for a stock Ls (Cb7Tuner)
this was covered soemtime last week:
https://honda-tech.com/zerothread?id=1020603
https://honda-tech.com/zerothread?id=1020603
Thread
Thread Starter
Forum
Replies
Last Post
blufke
Forced Induction
8
10-09-2002 11:23 AM
