<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nowtype &raquo;</TD></TR><TR><TD CLASS="quote">

No, but based on the fact you've asked this question twice, I'd suggest it strongly. If you ask the question again, I'm going to break out the profanities and point out the fact you are another idiot French Canadian. Figure it out or buy the board. It's a map sensor. It calls for 3 wires. If you can't figure it out, then you are dumb.</TD></TR></TABLE>

L O L

/owned

 

I'll say it again nowtype did I insult you? no so I suggest you look at yourself before you reply to someone in a rude manor. I am not French so dont judge someone you dont know. I can call you all kinds of names but wat justice is that gonna do.

 

Blah blah blah. I guess I'm being insensitive. It's probably pretty hard to wire sensors when your hands are covered in maple syrup and failure.

 

You are so insensitive. I'm never coming to you for a hug.

 

blah blah blah cause guys like you no ones wants to post. cause all you do is make fun of them, and you wonder why not many people like HT. HT is a good info based forum. guys like you make it uncomfortable for others. think before you reply have some comon sense for others around u

 

Have I attacked you? Look at my posts for the last two months or so, have I attacked anybody? Look at 95% of the posts from 2+ years ago where I *do* attack somebody and they're usually a dickhole or won't listen to plain reason or are refusing to think.

I remember three threads in a row right before I quit postwhoring here where I went out of my way to attack people asking decent questions, waiting until there were fifteen JD bandwagoners hopping on the guy, too, and then I pointed out how stupid bandwagons are and how the OP didn't deserve the treatment I'd given him in the first place. HT was not, at that time, a decent forum as it contained a bunch of JDM loving bandwagon riding hateraid drinking idiots who couldn't think for themselves... but, you know what?, there are a lot of intelligent people with experience on here right now that are treating each other decently so I'm here to be part of that and play a little ball. I'll be here as long as it lasts.

Take the plural off of 'guys' and keep your conflict with nowtype, you are welcome to it.

 

https://honda-tech.com/zerothread?id=2175973

Date: 12/16/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nowtype &raquo;</TD></TR><TR><TD CLASS="quote">http://www.xenocron.com Spend $20 and get the PCB mounting board. Soldering anything on that small of a sensor would be ridiculous.</TD></TR></TABLE>

https://honda-tech.com/zerothread?id=2183314

Date: 12/26/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted_B_Series &raquo;</TD></TR><TR><TD CLASS="quote">PIN 2 = RED
PIN 3 = BLACK
PIN 4 = WHITE


These colors according to the instructions go to the following factory map wire colors as follows below.

RED = Yellow w/white or red stripe OEM
BLACK = Green w/white stripe OEM
WHITE = White w/yellow stripe or Red w/green stripe OEM

Hope this helps,
dk</TD></TR></TABLE>

https://honda-tech.com/zerothread?id=2126460

Date: 12/19/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nfn15037 &raquo;</TD></TR><TR><TD CLASS="quote">

What about it? All automotive MAP sensors that we are dealing with in the context of a Honda have 3 wires. +5V, GND, and signal. Your sensor should come with some sort of documentation and figuring out the wiring on the car is easy or just use the wire colors in your service manual or the ones shown above in this thread.</TD></TR></TABLE>

Date: 12/19/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtber &raquo;</TD></TR><TR><TD CLASS="quote">http://img92.imageshack.us/my....2.jpg</TD></TR></TABLE>

Date: 12/21/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nowtype &raquo;</TD></TR><TR><TD CLASS="quote">http://www.xenocron.com/catalo....html

</TD></TR></TABLE>

Date: 12/23/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nowtype &raquo;</TD></TR><TR><TD CLASS="quote">

No, but based on the fact you've asked this question twice, I'd suggest it strongly. If you ask the question again, I'm going to break out the profanities and point out the fact you are another idiot French Canadian. Figure it out or buy the board. It's a map sensor. It calls for 3 wires. If you can't figure it out, then you are dumb.</TD></TR></TABLE>

You've been given instructions. You are too retarded to operate a damn soldering iron and volt meter. Don't blame me because you are inadequate at life and can't figure out how to install a map sensor. The information has been given to you. mtber told you what wires are which on the sensor and which pin they needed to go to on the sensor. If you couldn't gather form that information 2 weeks ago how to wire the sensor you should buy Xenocron's kit which makes it even easier. If you couldn't do that, then we should take that ridge less gray thing called your brain out of your head, coat it in maple syrup and eat it with some shitty Canadian Molson and a baguette as it is serving no utility in its current state.

 

Joseph Davis I am not pointing fingers at you. I am talkin about nowtype. so wat if I posted in another thread ur not a mod or admin to say anything. if so let them tell me. ya I saw those threads and if u look at my question I asked 2 totally different ones. one was do I need a circit board and the other is wat pin outs do I hook them to. ya maybe I forgot about the other one. big deal suck it up be a man and dont cry about it. its harmless

 

I could be mistaken, but I think nowtype went e-gangsta on me before too, maybe this is a trend?

 

A trend? Both of you are stupid, ask stupid questions, and then ask the same stupid question again because you are stupid. I then comment you are stupid. It's not a trend. It's just a reaction to your stupidity. Maybe you guys should work that muscle between your ears a little bit more and I won't have to remind you your brain is smooth.

 

I am just gonna be the better person and leave it alone cuz its no point in arguing with you and being childish about it, maybe you do have a trend. some mod or admin please lock ths thread.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nowtype &raquo;</TD></TR><TR><TD CLASS="quote">A trend? Both of you are stupid, ask stupid questions, and then ask the same stupid question again because you are stupid. </TD></TR></TABLE>

And you're perfect in every way, right?

In the real world I grade on willingness to learn and attitude. Your lesson for the day is that there are three distinct archetypical learning styles, two of which preclude your average intelligent person from learning easily from the format information appears in on forums. Doesn't mean Blondie is stupid, just means he might be the sort of guy who needs a careful detailed explaination to get things to click for him in a forum style layout.

Put the keyboard away and have one of these before you get back on it:

 

well put joseph davis

 

Joseph, I counter your claim with my first post directed to our friend smothered in maple syrup. I told the kid if he couldn't figure out how to wire 3 wires he should buy Xenocron's kit as it tells you how to mount and wire the thing. So if he can't learn on a forum and needs everything spelled out to him, didn't I give him exactly the advice he needed in order to get the job done?

Also beer and I aren't getting along. I'm buying various types and brands of beers and I haven't been satisfied with my last 4 or 5 6 packs. I didn't care for Stone IPA, Newcastle Brown Ale is just okay, Mackeson XXX stout was actually tasty but lacked a thickness you'd expect from a stout, and I bought Chesterfield Ale and it was just not pleasant at all.

 

I am not a kid. and your rude comments are not very acceptable. do you see me calling you names? I can make a whole list but you kno what I am not lowering myself down to your level, which is plain stupid. so wat big deal its your problem that you went thru all that to post the info when I already knew when that guy replied back to me. Nuff said dont be a baby and cry and whine. grow up

 

I really feel ill-equipped trashing French Canadians since meeting a couple of absolutely brilliant ones a couple weeks ago. Poutine is some disgusting stuff, but we really need to change the subject.

Meh, none of those beers catch my fancy either.

I recommend Highland Oatmeal Porter (almost a stout) or their Gaelic Ale (dark amber rich body), Arrogant Bastard Ale, or Wolaver IPA if you're in a hoppy mood.

 

do you know off hand if there is a sensitivity issue for obd2? i'm running the missing link and my brother is running the same thing but on an obd1 integra, but my car doesn't seem to be running as nicely.

 

dich the missing link and get gm or omni power map sensor. the omni power is plug and play
missing link are junk that just my 2 cents

 

ya i'm starting to notice that when my check light flickers and fuel cuts out every once in a while...