Help with getting turbo lsvtec working / ostrich / crome WTF!!!!
04-23-2007, 11:30 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Help with getting turbo lsvtec working / ostrich / crome WTF!!!!
I cant seem to get my lsvtec turbo running.
i got it started but it only seems to be running on 2 cyclinders and is ultra rich.
i tried running a stock b16 basemap on the ostrich converted for the 450cc's.
when it ran it was pig rich and seemed to only be running on 2 cyclinders. All the cyclinders are getting plenty spark and when i look in the cyclinders two and four are dirty and 1 and 3 are clean. The engine is on a fresh build so 2 pistons are still shiny. Also when i remove the plugs they are wet and fouled. it ran only to about 1500 rpm with my foot on the gas... i cant understand why so much fuel is dumping into the engine with stock maps... i treied switching to non chipped stock ecus and its the same thing... just rich rich rich even with 240cc injectors. i even swithced injectors and dizzies. whats goin on here? btw i do have an AEM fuel rail on the car but stock fpr.
i got it started but it only seems to be running on 2 cyclinders and is ultra rich.
i tried running a stock b16 basemap on the ostrich converted for the 450cc's.
when it ran it was pig rich and seemed to only be running on 2 cyclinders. All the cyclinders are getting plenty spark and when i look in the cyclinders two and four are dirty and 1 and 3 are clean. The engine is on a fresh build so 2 pistons are still shiny. Also when i remove the plugs they are wet and fouled. it ran only to about 1500 rpm with my foot on the gas... i cant understand why so much fuel is dumping into the engine with stock maps... i treied switching to non chipped stock ecus and its the same thing... just rich rich rich even with 240cc injectors. i even swithced injectors and dizzies. whats goin on here? btw i do have an AEM fuel rail on the car but stock fpr.
Thread
Thread Starter
Forum
Replies
Last Post