Help with Profec B
#1
Thread Starter
Join Date: Mar 2002
Location: Fresno, CA
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Help with Profec B
How do i set this thing to boost at 8psi?and i need help on hooking it up..I am confuse where to hook up the (In)nipple from the Greddy motor to.the out i hook up to the wastegate.can someone help me thanks
#2
Honda-Tech Member
Join Date: Oct 2000
Location: Yokohama, Japan, Japan
Posts: 7,810
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with Profec B (B20TURB0)
before a million people flame you for not doing a search, here's the post your are looking for:
https://honda-tech.com/zerothread?id=328052
https://honda-tech.com/zerothread?id=328052
#5
Honda-Tech Member
Join Date: Feb 2002
Location: Peoria, IL, USA
Posts: 1,835
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help with Profec B (B20TURB0)
Heres how I have mine hooked up and it works great. Others use connections that didnt work for me (like the Greddy instructions).
Compressor nipple to the in
The out on the Profec to the side of the Tial (top is left open to air)
Compressor nipple to the in
The out on the Profec to the side of the Tial (top is left open to air)
#6
Re: Help with Profec B (B20-T)
I have profec-B and HKS wastegate. Had this setup a while now and never had an problem. I have always set the boost at 12 psi max. Just recently I cranked up the boost to 18 pound and ran on the dyno, no problem. However, ever since I cranked it up, I have problem setting it back to 12 pound on the street. It just creepes all the way up to 18 pound when I bring the motor to 7000 rpm in third. Almost like the wastegate is trying to set the 12psi goal but got overtaken at high rpm. I set both **** back to zero and it still does it. I havn't had time to further diagnostic the problem but I really think it's either the wastegate or the profec unit.
Btw, I have full 3inch dp and 3in thermal exhaust, no cat. SFP manifold. ( it's not the exhaust unit since I can control it very well before. )
Btw, I have full 3inch dp and 3in thermal exhaust, no cat. SFP manifold. ( it's not the exhaust unit since I can control it very well before. )
Thread
Thread Starter
Forum
Replies
Last Post
turbotime
Forced Induction
7
09-10-2006 05:12 PM
94lsboost
Forced Induction
5
02-05-2005 07:54 AM