Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: DEIVIONCRX
Showing results 1 to 25 of 493
Search took 1.03 seconds.
Forum: Honda Fit
07-11-2012, 09:38 AM
Replies: 3
Views: 3,474
Posted By DEIVIONCRX

Re: not happy after dealer changed MT fluid

Id try it, i use Syncromesh in every manual Honda tranny i own.

The new light green Honda MTF is made to fix some problems Honda started having in the transmissions.
Forum: Tech / Misc
09-24-2011, 08:23 AM
Replies: 19
Views: 16,436
Posted By DEIVIONCRX

Re: innovate wideband o2 - can it send "narrow" signal to the ecu as well?

Yes your LC-1 has 2 output wires, one is Simulated narrowband so you can run normal open/closed loop operation on your ecu, and the other is Wideband for tuning.
Forum: Forced Induction
09-24-2010, 01:07 PM
Replies: 50
Views: 5,110
Posted By DEIVIONCRX

Re: its ashame innovate is such a piece of crap

The LC-1 uses the stock Volkswagen sensor, so blame Volkswagen. It comes off a random year on the 1.8Turbo cars and some of the VR6's, you'll have to do some research to come up with the right years.
Forum: Road Racing / Autocross & Time Attack
09-24-2010, 01:02 PM
Replies: 8
Views: 6,522
Posted By DEIVIONCRX

Re: In and out ports on Mocal Sandwich Adapter

Your style Mocal adapter has a thermostat on it, i think it opens at 180*F. So you wont see any flow till then.

Non-Thermostat Version...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-05-2010, 01:16 PM
Replies: 5
Views: 979
Posted By DEIVIONCRX

Re: Si-R Housing Bulb Type

Should be H4H.
Forum: Tech / Misc
07-23-2010, 07:45 AM
Replies: 5
Views: 8,658
Posted By DEIVIONCRX

Re: chassis ground vs engine ground (gauges)

I ground my LC1 XD16 gauge to the thermostat housing, its good enough for the ECU.
Forum: Honda CRX / EF Civic (1988 - 1991)
07-20-2010, 07:30 AM
Replies: 19
Views: 3,330
Posted By DEIVIONCRX

Re: defective hasport mount for b16a swap into crx?

Call Keith at HAsport, he will warranty the bushings. Their old mounts used a Red/Orange urethane insert and it deteriorates and turns into a liquid. The new black inserts don't do this.
Forum: Paint and Body
07-16-2010, 06:47 AM
Replies: 11
Views: 1,677
Posted By DEIVIONCRX

Re: removing rolled paint?

They do make plastic safe paint strippers.
Forum: Hybrid / Engine Swaps
07-16-2010, 06:42 AM
Replies: 17
Views: 3,314
Posted By DEIVIONCRX

Re: CTR N1 pulley for b18c5 yay or nay?

http://www.fluidampr.com/HONDA.htm

http://www.atiracing.com/products/dampers/charts/damhonda.htm
Forum: Classic Hondas
07-02-2010, 07:23 AM
Replies: 13
Views: 2,056
Posted By DEIVIONCRX

Re: 86' 4x4 wagon

The 4x4 blocks i think are the same bolt housing as the D16A1's from the 1Gen Integras.

The 85-87 Si Fuel Injected motors are EW4 in 85-86 and D15A3 in 87.
Forum: Honda CRX / EF Civic (1988 - 1991)
07-02-2010, 07:15 AM
Replies: 13
Views: 15,123
Posted By DEIVIONCRX

Re: wtf is a knee?

A Knee Assembly is commonly used in the Salvage, Bodyshop area. Quick way of telling somebody you need the entire corners worth of suspension.
Forum: Tech / Misc
06-25-2010, 07:39 AM
Replies: 4
Views: 913
Posted By DEIVIONCRX

Re: Is MY OIL PSI to high

Rule of thumb has always been 10psi per 1000 RPM, altho id like to see 15-20 at idle.
Forum: Tech / Misc
05-13-2010, 05:51 AM
Replies: 3
Views: 3,980
Posted By DEIVIONCRX

Re: Want to run oil temp and oil pressure sensors to my hondata s300

Resistance is voltage. I'm not exactly sure what your asking. 99% of the sensors out there supply 5 or 12volts then vary the resistance to come back with .049v or .45v or .0003v or whatever the...
Forum: Tech / Misc
05-13-2010, 05:47 AM
Replies: 8
Views: 3,822
Posted By DEIVIONCRX

Re: CTR N1 pulley

Its made for the N1 race civic, which like ^^^ said is rebuilt after races. Its also built for a blueprinted and ballanced 1.6lt. Not a 1.8 or a 2.0.

ATI
Forum: Hybrid / Engine Swaps
04-29-2010, 12:56 PM
Replies: 1
Views: 2,366
Posted By DEIVIONCRX

Re: PR4 to P75, when did honda switch over?

My Hollander interchange shows the switch from PR4 to P75 is 95/96.
Forum: Suspension & Brakes
04-22-2010, 12:59 PM
Replies: 10
Views: 2,555
Posted By DEIVIONCRX

Re: Powdercoating Koni Sports...worth it?

Dupli-color School Bus Yellow is the closest match to Koni Yellow, Yellow.

Koni's paint is horrendous it lasts about 10mins normally. Just spray bomb it and call it good.
Forum: Classic Hondas
04-13-2010, 06:50 AM
Replies: 7
Views: 31,478
Posted By DEIVIONCRX

Re: 1988 Honda Accord LXI - Where is the OBD port?

There is no such thing as a Diagnostic port until you get to 92 and newer Honda's, and even then the 92-95 isn't usable by any normal scanner Ive ever seen so really its 96 and newer.

The 88...
Forum: Honda CRX / EF Civic (1988 - 1991)
03-15-2010, 09:28 AM
Replies: 59
Views: 2,847
Posted By DEIVIONCRX

Re: how to make the yellow lights from the tail lights stay on

The easyest way to do it would be to take some brake light bulb sockets, make them fit in the turn signal housing, then wire them up so they come on with the running lights then flash with the turn...
Forum: Honda CRX / EF Civic (1988 - 1991)
03-13-2010, 06:34 AM
Replies: 10
Views: 2,853
Posted By DEIVIONCRX

Re: since pm6 ecu can be socketed... what about pr3?

Only the 90-91 PM6 can be chipped. Im not sure about the PR4.
Forum: Classic Hondas
03-10-2010, 07:09 AM
Replies: 91
Views: 50,179
Posted By DEIVIONCRX

Re: the meaning of Si?

What Ive always figured.

DX = Deluxe
LX = Luxury
EX = Executive
HF = High Fuel
Forum: Lighting
02-23-2010, 12:13 PM
Replies: 1
Views: 1,250
Posted By DEIVIONCRX

Re: 90 civic turn signal problem

My 88 Sedan is doing the same thing. I havent tried to trouble shoot it yet. If you figure out what it is, let me know.
Forum: Suspension & Brakes
02-12-2010, 10:20 AM
Replies: 2
Views: 866
Posted By DEIVIONCRX

Source for Single or Pair Ground Control Sleeves.

Ive got a custom application I'm working on right now. In the rear I'm using 42mm body Koni Yellow 8040's. I'm looking for just 2 rear Koni Specific GC Sleeves, like off a 88-91 Civic/CRX or pretty...
Forum: Honda / Acura
01-22-2010, 07:29 AM
Replies: 49
Views: 3,793
Posted By DEIVIONCRX

Re: 15x8 + 25 on my PYITR

I love it.
Forum: Welding / Fabrication
01-16-2010, 07:55 AM
Replies: 135
Views: 21,032
Posted By DEIVIONCRX

Re: Been Busy...

I didnt see it anywhere in the thread, it looks like youve got 2 if not 3 different bolt patterns to the flange. What all motors is it designed to fit. B16 and GSR?
Showing results 1 to 25 of 493
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 09:35 PM.