Been Busy...
#1
Been Busy...
Working on more intake manifolds
And a few pictures of the internal velocity stacks we machined.
The base plate has the IAT, as well as 6x 1/8" NPT Fittings and 2x, 3/8" NPT Fitting bosses machined into it.
-James
Update with new pics!
Manifold fits like a glove!
And a few pictures of the internal velocity stacks we machined.
The base plate has the IAT, as well as 6x 1/8" NPT Fittings and 2x, 3/8" NPT Fitting bosses machined into it.
-James
Update with new pics!
Manifold fits like a glove!
Last edited by BMCRace; 12-04-2009 at 02:16 PM.
#7
Re: Been Busy...
This manifold is a modular manifold and therefor means, the runner lengths may be changed out at any time, as well as the plenum. Also it helps to make the manifold alot easier to produce...
O Ring Groove in the plenum base plate
Bolts gong from head flange to plenum base plate
The plenum base plate is cnc machined from .5" solid billet so I am pretty sure it wont be going anywhere anytime soon.
Trending Topics
#12
Honda-Tech Member
Re: Been Busy...
Keep it coming James, better every day!
When can I have one, we just transplanted my old C/F AIR manifold on our test pig and were blown away by the reuslt. Now I wanna test something else thats a little more available to the public
When can I have one, we just transplanted my old C/F AIR manifold on our test pig and were blown away by the reuslt. Now I wanna test something else thats a little more available to the public
#13
Re: Been Busy...
We are working on getting all the final details finished on our 3 different plenum types as well as the single and dual injector head flanges 100% bug free (cnc machine program wise)
Basically we are doing a stage 1, 2 and 3 deal for the plenums
Stage 1 plenum will be around 2liters volume and incorporate a typical velocity stack machined into the floor of the plenum. This one we are tuning for the 350-500 whp mark and will be more focused for daily drivers, weekend warriors, and road course setups.
Stage 2 plenum will be a little over 3.5 liters volume (volume determined without velocity stacks, so slightly less) and incorporate a slightly lesser raised air horn very similar to what is posted above. This plenum is being tuned for powers around 800whp and is more meant for the drag guys. Think sport fwd...
Stage 3 plenum (posted above) is 5 liters volume (volume determined without velocity stacks so slightly less). This setup is tuned for the go big or go home crowd, 800++++ whp...
Once I get all 3 setups 100% I will send them all to you for you to do a very nice testing and review on. Actually I will be sending them to many of shops to get them circulating, so yall will all have to share and play nice lol
Basically we are doing a stage 1, 2 and 3 deal for the plenums
Stage 1 plenum will be around 2liters volume and incorporate a typical velocity stack machined into the floor of the plenum. This one we are tuning for the 350-500 whp mark and will be more focused for daily drivers, weekend warriors, and road course setups.
Stage 2 plenum will be a little over 3.5 liters volume (volume determined without velocity stacks, so slightly less) and incorporate a slightly lesser raised air horn very similar to what is posted above. This plenum is being tuned for powers around 800whp and is more meant for the drag guys. Think sport fwd...
Stage 3 plenum (posted above) is 5 liters volume (volume determined without velocity stacks so slightly less). This setup is tuned for the go big or go home crowd, 800++++ whp...
Once I get all 3 setups 100% I will send them all to you for you to do a very nice testing and review on. Actually I will be sending them to many of shops to get them circulating, so yall will all have to share and play nice lol
Last edited by BMCRace; 11-29-2009 at 10:36 AM.
#18
Re: Been Busy...
Hey Aldo and Jose,
this one is actually the smaller one I was telling yall I was working on.
Here is your big bad one for your car Jose
Sam is supposed to be finishing up those dual injector flanges for me within 2 weeks, also we will have to build the new fuel rail which we are bumping the dual injector rails size up to a -12 an
-James
this one is actually the smaller one I was telling yall I was working on.
Here is your big bad one for your car Jose
Sam is supposed to be finishing up those dual injector flanges for me within 2 weeks, also we will have to build the new fuel rail which we are bumping the dual injector rails size up to a -12 an
-James
#20
Honda-Tech Member
Join Date: Aug 2008
Location: Houston, Texas, USA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: Been Busy...
Hey Aldo and Jose,
this one is actually the smaller one I was telling yall I was working on.
Here is your big bad one for your car Jose
Sam is supposed to be finishing up those dual injector flanges for me within 2 weeks, also we will have to build the new fuel rail which we are bumping the dual injector rails size up to a -12 an
-James
this one is actually the smaller one I was telling yall I was working on.
Here is your big bad one for your car Jose
Sam is supposed to be finishing up those dual injector flanges for me within 2 weeks, also we will have to build the new fuel rail which we are bumping the dual injector rails size up to a -12 an
-James
#22
Honda-Tech Member
#24
FSAE
Re: Been Busy...
Why not machine the velocity stacks to 180* bellmouths? It looks like there is plenty of room.
Looks like an interesting design. I am assuming most customers who purchase this unit are FI?
Looks like an interesting design. I am assuming most customers who purchase this unit are FI?
#25
Re: Been Busy...
For some reason our mastercam (program we use to write the programs for the cnc mills) does not want to cut a radius on it right there. Sam has spent many hours trying to get it to but it just does not want to co-operate.
We will eventually get it to quit being a little punk and subside but till then this is how it is.
Either FI or big rpm high power all motor.
We will eventually get it to quit being a little punk and subside but till then this is how it is.
Either FI or big rpm high power all motor.