In need of some info on my harness
01-06-2009, 05:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: new bern, NC, United States
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
In need of some info on my harness
Hopefully within the next month I plan on swapping my H23 with a H22a from hmotors. Now I'm all set on swapping motors, but I'm not that good when it comes to wiring up VTEC. The h22 came with a jdm ecu and harness, but I'm going to use a OEM ecu.
Will I run into any problems if I use the jdm harness with an oem ecu?
If I use an oem harness will I just be able to hook everything up with out having to worry about seperetely wiring the VTEC.
Also if there is any other issues I'll probably run into, please warn me.
Thanks.
Will I run into any problems if I use the jdm harness with an oem ecu?
If I use an oem harness will I just be able to hook everything up with out having to worry about seperetely wiring the VTEC.
Also if there is any other issues I'll probably run into, please warn me.
Thanks.
01-06-2009, 05:27 PM
#2
Honda-Tech Member
Join Date: Nov 2008
Location: F-town!
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Re: In need of some info on my harness
I would use your stock harness thats in the car the ECU you recieve with the swap and buy this http://rywire.com/store/9295-prelude...b4516f0370a1c3 and it will solve all your problems
01-06-2009, 05:35 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Aug 2007
Location: new bern, NC, United States
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: In need of some info on my harness
OK, so with that I can still use my H23 harness and that rywire hooks straight to the h22 ecu?
01-06-2009, 06:05 PM
#4
Honda-Tech Member
Join Date: Nov 2008
Location: F-town!
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post