Transmission Guru; your run of the mill hydro v cable ?'s
11-03-2003, 11:04 AM
#1
Thread Starter
Join Date: Jan 2002
Location: Los Vargos, NV
Posts: 1,497
Likes: 0
Received 0 Likes
on
0 Posts
Transmission Guru; your run of the mill hydro v cable ?'s
I'm looking for someone that can explain a few questions i have about the internals of a hydro tranny vs a cable.
I know that with in the actual "shift changing" mechanism one is liquid pressured while the other works on a basic shift fork.
I was wondering beyond the case, and that shifting equipment is there anything else that is substantially different within the transmission.
Appreciated,
cingham
I know that with in the actual "shift changing" mechanism one is liquid pressured while the other works on a basic shift fork.
I was wondering beyond the case, and that shifting equipment is there anything else that is substantially different within the transmission.
Appreciated,
cingham
11-03-2003, 04:54 PM
#2
Junior Member
Join Date: Nov 2001
Location: Sacramento area, CA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Transmission Guru; your run of the mill hydro v cable ?'s (cingham)
They both have a shift fork. Just one is pulled by cable mechanically and the other is pushed by a hydrolic cylinder (slave sylinder) 
All hydro is refering to is the way the clutch is applied.
All hydro is refering to is the way the clutch is applied.
Thread
Thread Starter
Forum
Replies
Last Post
