Surface rust on cylinder walls
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 526
Likes: 0
From: Maple Ridge, BC, Canada
Surface rust on cylinder walls
I just received a B18c1 that I'm building for someone and the walls have a bit of rust on them. I've built a b20 with a little rust on it and it was fine but this ones got quite a bit more. Any advice would help. TIA
Good, Bad…I'm the one with the gun
Joined: Jul 2002
Posts: 5,241
Likes: 2
From: Trapped in time, Surrounded by evil, Low on gas
Re: Surface rust on cylinder walls (quik1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quik1 »</TD></TR><TR><TD CLASS="quote">cool anyone else?</TD></TR></TABLE>
what else do you need?
send the block to me, there is another advice.
stan
what else do you need?
send the block to me, there is another advice.
stan
Thread
Thread Starter
Forum
Replies
Last Post
