just put together my gsr and im getting a horrible boggin when i accelerate. its to the point that if i give it 100% throttle is will **** off. the only cel code im getting is air intake temperature. i did some troubleshooting with my snap on scanner and i think i have a problem with the wiring because if i disconnect the iat sensor the car should read a -42*f and if i jump the plug i should get a reading of 320*f but i only get a reading of 110*f which is the same reading i get if i connect the iat sensor. i checked all my ground and did a continuity test in the wire back to the computer. i have no clue what to do next. thanks in advance for your help.

 

no clues eh

 

i'd start by checking your timing

 

checked the timing and everything is on point. the car sat all winter and no one messed with anything. there is no way possible for a car to loose its timing while sitting. thanks though.

 

you'd be suprised what can happen when a car sits for a long time