WHAT IF YOU PUT PEAK AND HOLD INJECTORS IN A OBD1 CAR, AND NOT SAT LIKE THEY TELL YOU TO DO. BECAUSE MY SHOP SOLD ME P&H ONES AND I DIDNT EVEN KNOW IT UNTILL I LOOKED UP THE PART# ON THE MSD WEB PAGE.
WILL IT MAKE MY CAR GO LEAN WHEN I GET ON IT?

 

it will fry your ecu, thats all. install a resistor box

 

OK SO YESTERDAY I PUT MY SAT INJECTORS IN MY CAR AND I LET IT WARM UP ABOUT A 1/4 OF THE WAY AND DROVE IT TO THE GAS STATION AND PUT 93 OCT IN IT AND BY THE TIME I DROVE OUT OF THE PARKING LOT IT WAS AT THE RIGHT TEMP SO I GOT ON IT THE FIRST TIME I SEEN THE A/F GOT IN THE MIDDLE SO I WAS LIKE OK THEN I GOT ON IT TWICE AND IT WENT LEAN PLEASE SOMEONE PLEASE HELP ME I TRYED JUST ABOUT EVERTHING AND I ALSO HAVE THE 6-1 VORTECH FMU IN IT IS THERE ANYTHING YOU GUYS COULD TELL ME OR HAD SOMETHING LIKE THIS HAPPEN TO YOU

VORTECH SUPERCHARGER-SKUNK2 IM AND SHORT SHIFTER-HEADER BACK 2 1/4 PIPE WITH HIGH FLOW- NOLOGY WIRES AND PLUGS-B16A3 94 DEL SLOW


IF MY ECU IS FUCKED WILL MY CAR STILL RUN OR WILL IT JUST MAKE MY CAR GO LEAN WHEN I GET ON IT