im in the process of doing a b16b in a 2000 civic ex coupe. the problem we are having is when the car is idleing and u push the gas pedal it shuts off. we are running the civic type r ecu. i think its a vaccum leak but everything seems hooked up. the only wire thats not hooked up is the blue wire which is tack output. by the way we are using the 2000 ex wire harness. any help thanks

 

anyone

 

how's the map sensor?

 

the map is fine checked all the vaccum lines cleaned the iacv with carb cleaner still no luck

 

Check the CEL's bro

MAP sensor readings are most likely screwed, or bad MAP sensor.

 

If it idles high, its a symtom of a vac. leak, take some propane and open a small opening and run it over your vac. lines. If the idle goes up when your by one you've found your leak.... Is the ECU throwing any codes?

Blaze

 

update on the problem we checked the codes. they are map sensor, tps, and iacv. we cleaned the iacv codes still came up. we used the map sensor of the sohc code still came up. what can we do now since we know what the codes are? how do we go about solving the problem.

 

soundslike youmight not have connected a ground right somewhere.check your grounds.