now is it hard to do a swap in one of these as they already have vtec do i have to add any wires for it?
we will be putting a SIR b16a in it..
what shafts do i use and what linkages do i use?

 

For a B16 it should be a direct swap. Just swap over the harness from the Si onto the B16 and you should be set. The B series axles will work and i forget what to use for the linkage. If im forgetting anything fill me in.

 

use 94-00 gsr linkages, b series axles. you need to wire in knock sensor.

 

so wire up knock sensor and get a set of SIR drive shafts. is there anyother drive shafts that are prob cheeper then them.
now i will still have to do a hasport mount kit right?