does anybody have an all-motor a6? what are your mods and 1/4 mile times if any.

thanks

 

our old crx had a stock A6 block with Exospeed head and cam. 13.6 @99mph

last year we built an 89 HB civic with an Exospeed 12:1 CR block with same Exospeed Race head and went 12.89 on it.

As of today.. we are starting a new project for an all motor daily driven 12 sec CRX. Our plans are to test out a new Manifold for the SOHC and the new Bisimoto header. We would like 11 sec daily on this but realistically We'd be happy with a 12.2 or so.
Keep in mind these are all SOHC D16A6 Fuel injected.

At the same time, we are still continuing our Y8 All motor Project. Dyno results for the NEW intake manifold is planned for that as well.

Wil


Modified by exospeedAMcrx at 11:06 PM 7/31/2003

 

nice!

 

on your old crx, all you did was use a ported head and a better cam to get those times? that is what we want for this all-motor daily driven crx.

 

he forgot to tell you the weights of the cars.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NA CRX Si &raquo;</TD></TR><TR><TD CLASS="quote">he forgot to tell you the weights of the cars. </TD></TR></TABLE>

what are the weights of the cars?

 

dont get mad at me wil if i get these wrong, but wils car had no fiberglass meaning it was all stock doors with nothing cut. and weighed in at like 1570lbs without driver i dont remember what he told me the new project car weights but its light.

 

yes it was about 1570lbs. w/o driver. no fiberglass parts at all.. but we took out as much as we can on this 89 CRX HF.

We just started a new Street CRX SOHC project this week and the goal on that is at least a mid 12 street driven. full interior. D16A6

 

wow, i guess that car will fly. we are hoping for 13's with our set-up which is pending but we are looking for a good street/strip cam for our project. Where could i find one online?

 

I have some mean All Motor A6 cams available... if you really are serious to get the A6 as fast as you can.. let me know. Those wanting stock like idle... not going to happen hehe..

We have 2 stages of A6 cams we dont advertise but they are available for the serious A6 enthusiast.

 

wil how much is that street crx gonna weigh? also whats gonna be done to it?

 

exospeedAMcrx how is your D16A6 bore x stroke.?? do you sell some stroker kit like your A6 ??

 

I am pretty budget on the D16 setups that we do and we try to make it as easy to copy as well as reliable so alot of people can do the same thing. We dont stroke the motor but we do bigger bore on the a6 as well as any motor.

If a customer wants a stroker A6, we can do that if they want.

 

ohh i see..
BTW ,how big is your bore
Im just currious about your 12 sec SCREAMER displacement

Thanks

 

not finalized yet onthe bore we going to use. we did 12's on a 75mm bore. im stilll deciding if I want to try it at 75mm or go bigger.

 

hey wil ever heard of R1 headers?

 

that those China made headers?

 

are they any good?

 

please people need to do search bro. There are tons of information that has already been talked about time over time. Unless you have a specific questions or therory about moding the D16a6 your answer will most likely be already posted in teh search topics. I know that will must have posted replys about his setup more them 200 times.Gust be glad he a nice guy and is always willing to help.
let me give you a start on what is in SEARCH

https://honda-tech.com/zerothread?id=520859
https://honda-tech.com/zerothread?id=538331
https://honda-tech.com/zerothread?id=567609 check a few signatures in the people who posted.

https://honda-tech.com/zerothread?id=574735
https://honda-tech.com/zerothread?id=425745
https://honda-tech.com/zerothread?id=401890 build up 101
https://honda-tech.com/zerothread?id=88934
https://honda-tech.com/zerothread?id=525356
https://honda-tech.com/zerothread?id=496620
https://honda-tech.com/zerothread?id=490441 dyno #ers
https://honda-tech.com/zerothread?id=480418 time slips
https://honda-tech.com/zerothread?id=461235 good how to y8 manifold swap
https://honda-tech.com/zerothread?id=467390 a6 vs z6 block
https://honda-tech.com/zerothread?id=442619 cams
https://honda-tech.com/zerothread?id=441437 wil helps out another h-tech newbie LOL
https://honda-tech.com/zerothread?id=439498 milling head? no!
https://honda-tech.com/zerothread?id=427814 cams for the a6!!
https://honda-tech.com/zerothread?id=433301 Zc vs D16a6
https://honda-tech.com/zerothread?id=429786
https://honda-tech.com/zerothread?id=337796
https://honda-tech.com/zerothread?id=388823 ... just for fun
https://honda-tech.com/zerothread?id=327327 A1 pistons on a6
https://honda-tech.com/zerothread?id=315435 tb for a6
https://honda-tech.com/zerothread?id=240323 another z6 vs a6
https://honda-tech.com/zerothread?id=227908
https://honda-tech.com/zerothread?id=107951 rev limits

heres a start there are 15pages of archives under D16a6 you still have tons of reasearch to do and possibilties to look up using search.
HTH

Wil.... one of the nices h-tech members here.. If I were you I'd be irriated as hell with people not using search. LOL

 

daym thats a nice list. hehe

I totally dont mind all the questions man.. I've been answering D series stuff since late 1990s when no one payed attention to the D series.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">daym thats a nice list. hehe

I totally dont mind all the questions man.. I've been answering D series stuff since late 1990s when no one payed attention to the D series.</TD></TR></TABLE>

YEAH including all of my IM and questions. LOL bro I really respect you for that

 

goddamn exospeedAMcrx run 12 sec with stock dispalcement A6 .. would you like to list us here what exactly your A6 12sec set up (cam dur, rods, gearbox ,TB, chip ,etc)??

pleaseee....


im sorry if my english wasnt so well
because english wasnt my mother tounge

 

JT, i'll elaborate more when the new setup is done...