New Dyno numbers.... 600hp+ on stock K20a2 block
Thread Starter
Honda-Tech Member
Joined: Dec 2006
Posts: 245
Likes: 0
From: Central Florida
New Dyno numbers.... 600hp+ on stock K20a2 block
So I set a new record for my car today on the dyno.
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
Honda-Tech Member
Joined: Aug 2004
Posts: 4,680
Likes: 2
From: Carlisle, PA, USA
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
So I set a new record for my car today on the dyno.
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
Setup is still the same..
K20a2 stock block, IPS Kt1 cams, Supertech Springs and retainers.
No rods, pistons, head studs, head gasket.... All OEM.
T3/T67 turbo, 1000 Precision Injectors
Picked up about 10hp with the exhaust cutout.
605hp with the muffler, 615hp with the cutout.
This was on Q16 on 24.5psi.
Tq sensor was broken so that is unknown at this point.
Car was tuned by Fred @HPC in South Florida..
If you know what RPM the pull started and ended at, you can fill in the torque curve yourself.
- Derek
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Dec 2006
Posts: 245
Likes: 0
From: Central Florida
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
. great work OS
Thread Starter
Honda-Tech Member
Joined: Dec 2006
Posts: 245
Likes: 0
From: Central Florida
Thread Starter
Honda-Tech Member
Joined: Dec 2006
Posts: 245
Likes: 0
From: Central Florida
Honda-Tech Member
Joined: Jun 2002
Posts: 5,551
Likes: 1
From: USA
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
Nice numbers and on a stock block k too... good stuff.
What rpm did you pull till and what housing on the that 67. Trying to judge how laggy that thing is on that setup.
What rpm did you pull till and what housing on the that 67. Trying to judge how laggy that thing is on that setup.
Thread Starter
Honda-Tech Member
Joined: Dec 2006
Posts: 245
Likes: 0
From: Central Florida
Re: New Dyno numbers.... 600hp+ on stock K20a2 block
Thread
Thread Starter
Forum
Replies
Last Post
TravisBiggie
Forced Induction
5
Aug 23, 2013 04:55 AM
