turbo doesnt have fitting for WG??
Thread Starter
Junior Member
Joined: Sep 2009
Posts: 31
Likes: 0
turbo doesnt have fitting for WG??
Hey guys my garrett t3/t4 doesnt have a fitting for a line to the waste gate...Is there another way i can route the WG without having to tap a fitting into my turbo?
Honda-Tech Member
Joined: May 2004
Posts: 4,222
Likes: 1
From: Tracys Landing, MD
Re: turbo doesnt have fitting for WG??
other options are to drill and tap the compressor housing, weld a fitting on the charge pipe or run something like this http://www.atpturbo.com/mm5/merchant..._Code=ATP-FTG1
Re: turbo doesnt have fitting for WG??
I drilled and tapped for 3/8" NPT and used a 3/8" NPT -6AN orb fitting to feed a solenoid and the wastegate. I had to cut down the 3/8" NPT threads to reduce the amount of protrusion into the discharge path.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
